Led2 Ringo Circular Ceiling Or Wall Lamp Instruction Manual

RINGO Circular Ceiling or Wall Lamp

Product Information:

The product is called RINGO RINGO Z.

It is an LED light fixture with an aluminium body.

The product can be operated with different types of dimmers,
including Push Dim, DALI/Push Dim, DALI Dim, and Triac Dim.

The product is designed for use with a 220-240 V power supply at
50/60 Hz.

The product is rated IP20, indicating it is protected against
solid objects larger than 12mm but not protected against water.

The manufacturer’s website is www.led2.eu.

Product Usage Instructions:

  1. Before installing the product, turn off the main power to
    prevent possible electric shock.
  2. The installation should only be carried out by a technician or
    a qualified person.
  3. If the product has a lampshade or diffuser, handle it carefully
    as it is fragile.
  4. If the product has an integrated LED light source and requires
    replacement, only a technician or a qualified person should perform
    the replacement.
  5. Ensure that the correct type of dimmer is used with the product
    based on the available options: Push Dim, DALI/Push Dim, DALI Dim,
    or Triac Dim.
  6. Connect the product to a power supply of 220-240 V at 50/60 Hz.
    The L (Line) and N (Neutral) terminals should be properly
    connected.
  7. Follow the specific instructions for each type of dimmer to
    control the brightness of the product.

RINGO RINGO Z

The installation may only be carried out by a technician Nur ein Techniker kann die Installation durchführen Instalaci smí provádt pouze technik Instaláciu môze vykona iba technik
This product contains a light source of energy efficiency class G Dieses Produkt enthält ein Leuchtmittel der Energieeffizienzklasse G Tento výrobek obsahuje svtelný zdroj tídy energetické úcinnosti G Tento výrobok obsahuje svetelný zdroj triedy energetickej úcinnosti G

SURFACE AUFBAU STROPNÍ STROPNÉ

1

2

6

7

3

4

5

a LL

b

a

N N

b

PRESS ALUMINIUM BODY ONLY!!!

SUSPENDED PENDEL ZÁVSNÁ ZÁVESNÉ

c

1

2

3

4

a

d

b

L L N N

5
a

a

L L

N N

b

6

7

PRESS ALUMINIUM BODY ONLY!!!

IP 20

www.led2.eu

CONNECTION – DIMMABLE VERSION – OPTIONAL VERBINDUNG – DIMMBARE VERSION – OPTIONAL ZAPOJENIE – STMIEVATENÁ VERZIA – NA VYZIADANIE ZAPOJENÍ – STMÍVATELNÁ VERZE – NA VYZÁDÁNÍ

1

PUSH DIM

220-240 V 50/60 Hz
L N
DRIVER

~ SEC

~
PRI

+ LED ­ LED

PUSH

2

DALI/PUSH DIM

220-240 V 50/60 Hz
L N
DRIVER

~ SEC

~
PRI

+ LED ­ LED

DA/N DA/L

3

DALI DIM

220-240 V 50/60 Hz
L N
DA DA
DRIVER

~ SEC

~
PRI

+ LED ­ LED

DA DA

4

TRIAC DIM

220-240 V 50/60 Hz
L N

Phase cut Triac dimmer

DRIVER

~ SEC

~
PRI

+ LED ­ LED

Trailing edge Leading edge

(EN) CAUTION!

Turn off the main power before proceeding with the installation in order to prevent possible shock. The installa

tion may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle

it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make

the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.

(DE) ACHTUNG!

Vor der Installation ist es notwendig, den Hauptstromkreis zu unterbrechen, um ein Stromschlag zu vermeiden.

Die Installation darf nur von einem Techniker oder einer qualifizierten Person durchgeführt werden. Wenn dieLampe einen Lampenschirm/Diffuser hat, gehen Sie vorsichtig damit um, da sie zerbrechlich ist. Mit einer integ

rierten LED-Lichtquelle kann nur ein Techniker oder eine qualifizierte Person den Austausch vornehmen. Der

Hersteller ist nicht verantwortlich für die fehlerhafte Verwendung und Montage seiner Produkte.

(SK) UPOZORNENIE!

Pred instaláciou je nevyhnutné odpoji hlavný elektrický okruh, aby ste predisli zasiahnutiu elektrickým prúdom-. Montáz môze vykona iba kvalifikovaná osoba. V prípade, ze má svietidlo tienidlo/difúzor, narábajte s ním opatrne, pretoze je krehké. Pri integrovanom LED svetelnom zdroji môze výmenu zrelizova iba technik alebo kvali

fikovaná osoba. Výrobca nenesie zodpovednos za nesprávne zachádzanie s produktom.

(CZ) UPOZORNNÍ!

Ped instalací je nutné odpojit hlavní elektrický okruh, abyste pedesli zasazení elektrickým proudem. Montáz

mze provádt pouze kvalifikovaná osoba. V pípad, ze má svítidlo stínidlo/difuzor, zacházejte s ním opatrn-, protoze je kehké. Pi integrovaném LED svtelném zdroji mze výmnu zrelizova pouze technik nebo kvalifiko

vaná osoba. Výrobce nenese odpovdnost za nesprávné zacházení s výrobkem.

www.led2.eu

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals