ZK3SN369VLH Stainless Steel Door Panel Kit
Product Information
The Stainless Steel Door Panel Kit is designed for the
installation of stainless steel door panels and toe kicks on
compatible appliances. The kit includes various components such as
top door panels, middle drawer panel, bottom drawer panel, toe
kick, and screws. There are different options available for single
door and French door configurations, as well as different handle
kits.
Components Included:
- 1 Stainless Steel Top Door Panel (Single Door Kit)
- 1 Stainless Steel Right Top Door Panel (French Door Kit)
- 1 Stainless Steel Left Top Door Panel (French Door Kit)
- 1 Stainless Steel Middle Drawer Panel
- 1 Stainless Steel Bottom Drawer Panel
- 1 Stainless Steel Toe Kick
- 48 M4 Phillips Screws
Tools and Materials Required:
- Phillips #2 bit/driver
- M4, M5 hex keys or bits/drivers (included with unit)
Product Usage Instructions
Panel Prep
- Locate the panel brackets in the convertible (middle) drawer of
the refrigerator. - Using the M4 machine screws provided with the stainless steel
door panel kit, install the brackets onto the appliance. Do not
tighten the screws at this stage. - If applicable, install the Monogram Statement or Minimalist
handles (sold separately) following the instructions provided in
the handle kit.
Top Panel Installation
- Position the top door panel onto the appliance, aligning the
brackets with the corresponding holes. - Secure the panel in place using the provided screws.
Middle Panel Installation
- Attach the middle drawer panel to the appliance, aligning it
with the brackets and holes. - Secure the panel using the provided screws.
Bottom Panel Installation
- Install the bottom drawer panel onto the appliance, aligning it
with the brackets and holes. - Secure the panel using the provided screws.
Toe Kick Installation
- Attach the stainless steel toe kick to the bottom of the
appliance. - Secure it in place using the provided screws.
Note: For detailed instructions on cabinet dimensions, trim
assembly, and door stop angle, refer to the installation
instructions provided in the user manual.
Installation Instructions
Stainless Steel Door Panel Kit
Before you begin – Read these instructions completely and carefully.
Note to Installer: Be sure to leave these instructions with Note to Consumer: Keep these instructions with your
the Consumer.
Installation Instructions for future reference.
WARNING
Tip Over Hazard.
These appliances are top heavy, especially with any
doors open, and must be secured to prevent tipping for-
ward which could result in death or serious injury. Read
and follow the entire installation instructions for securing
the appliance with the anti-tip system before installing
door panel kit.
WARNING d
Door Trim Pinch Point
Hazard
Improper installation can lead to a finger pinch point haz-
ard between the side door trim and the cabinets when
operating the door, especially with children. To minimize
this risk you must follow the installation instructions for
cabinet dimensions, trim assembly, and door stop angle.
AVERTISSEMENT
Risque de bascu-
lement
Ces électroménagers sont lourds dans le haut, en par-
ticulier avec une porte ouverte, de sorte qu’ils doivent
être fixés afin de prévenir un basculement vers l’avant
pouvant occasionner des blessures graves ou la mort. Veuillez lire et suivre la totalité des instructions d’installation afin de fixer votre électroménager par un dispositif antibasculement avec le système anti-bascule avant d’installer le kit de panneau de porte..
ADVERTENCIA
Riesgo de Caídas
Estos electrodomésticos son inestables, especialmente
cuando una puerta se encuentre abierta, y deben estar
asegurados a fin de evitar caídas hacia adelante que
podrían resultar en la muerte o en lesiones graves.
Lea y siga todas las instrucciones de instalación para
asegurar el aparato con el sistema antivuelco antes de
instalar el kit del panel de la puerta.
AVERTISSEMENT
d
Risque de pincement
sur la garniture de porte
Une installation mal effectuée représente un risque
de pincement de doigts entre la garniture latérale de
porte et les armoires lors de la manipulation de la porte,
spécialement pour les enfants. Pour minimiser le risque,
vous devez respecter les instructions d’installation
selon les dimensions de l’armoire, l’assemblage de
garniture et l’angle de butée de la porte.
ADVERTENCIA
d
Riesgo de Lastimadura
con el Borde de la Puerta
Una instalación inadecuada puede conducir a riesgos de
pellizcos de dedos entre el borde lateral de la puerta y
los gabinetes al utilizar la puerta, especialmente con los
niños. A fin de minimizar este riesgo, usted deberá seguir
las instrucciones de instalación para dimensiones de
gabinetes, ensambles de bordes y ángulos de detención
de puertas.
This kit provides for the installation of the Stainless Steel Door Panel Assemblies and Stainless Steel Toe Kicks
ZK3SN364VRH Single Door Right-Hand Stainless Steel Door Panel Kit
ZK3SN369VLH Single Door Left-Hand Stainless Steel Door Panel Kit
ZK4SN360VSS French Door Stainless Steel Door Panel Kit ZKSB3H3CVSS Single Door Minimalist Handle Kit ZKSB3H3PVSS Single Door Statement Handle Kit ZKSB4H4CVSS French Door Minimalist Handle Kit ZKSB4H4PVSS French Door Statement Handle Kit
Components Included
Quantity
Stainless Steel Top Door Panel (Single Door Kit)
1
Stainless Steel Right Top Door Panel (French Door Kit) 1
Stainless Steel Left Top Door Panel (French Door Kit) 1
Stainless Steel Middle Drawer Panel
1
Stainless Steel Bottom Drawer Panel
1
Stainless Steel Toe Kick
1
M4 Phillips Screws
48
Tools and Materials Required: Phillips #2 bit/driver, M4, M5 hex keys (included with unit) or bits/drivers.
31-1000727 Rev. 0
Installation Instructions
PANEL PREP
Panel brackets are shipped with the refrigerator in the convertible (middle) drawer. Use the M4 machine screws provided with the stainless steel door panel kit to install brackets. Do not tighten screws.
Install Monogram Statement or Minimalist handles (sold separately). Follow instructions provided in the
handle kit.
D1
A1
TOP PANEL
G1 *
* G1
E1
B1
F1
MIDDLE PANEL
C1
D1
A1
BOTTOM
E1
PANEL
B1
Single Door Rear View of Panels
D1
J1 H1
A1
RIGHT TOP PANEL
G1*
LEFT TOP PANEL
* G1
Use a small washer for each screw when installing J1 and H1 brackets.
E1
B1
* H1 J1*
F1
MIDDLE PANEL
C1
D1
A1
BOTTOM
E1
PANEL
B1
French Door Rear View of Panels
* G1 brackets (and bottom H1 and J1 brackets for French door model) will be installed after door panels are hung.
Do not tighten the screws, you will do that after assembly process and left to right alignment.
Follow the remainder of the stainless steel door panel installation instructions in the unit installation instructions to adjust and secure the door panels.
TOE KICK INSTALLATION
7KLVNLWSURYLGHVDVWDLQOHVVVWHHOWRHNLFNIRUDVLQJOH integrated unit installation. Refer to the unit installation instructions for information on custom toe kicks and stainless steel standard and dual installation toe kicks.
T he toe kick attaches to the refrigerator by using a magnet that is provided with the refrigerator.
R emove the toe kick magnet from the front access cover.
A dhere magnet to back side of toe kick. The surface of the toe kick where the magnet is to be placed must be clean and free of foreign material. Center magnet vertically and horizontally.
P osition toe kick on bottom portion of the front access cover.
Instructions for this kit are also included in the full installation instructions included with the unit.
Les instructions de cette trousse sont également incluses dans les instructions d’installation complètes fournies avec l’appareil.
Las instrucciones de este kit también están incluidas en las instrucciones de instalación completas enviadas junto con la unidad.
For the full owner’s manual, visit our website at monogram.com.
Pour une version française du manuel du propriétaire complet, visitez notre site Web à monogram.ca.
Para obtener una versión en español del manual del propietario completo, visite nuestro sitio web en monogram.com.
31-1000727 Rev. 0 05-23 GEA
Printed in the United States
Homepage | Monogram
Monogram Appliances
