TX-H60 Oxy-Hydrogen Generator
Product Information
The Ox y-H ydroge n Ge ne ra t or is a product manufactured by
Ptxson Eco-technology Co.,Ltd. It is available in three different
models:
- TX-H60
- TX-H100
- TX-H150
Each model has specific features:
- TX-H60: This model is equipped with a pressure releasing
valve. - TX-H100: This model is equipped with a pressure gauge.
Product Usage Instructions
To use the Ox y-H ydroge n Ge ne ra t or, follow the steps
below:
1. Initial Setup
- Place the generator on a stable and flat surface.
- Connect the generator to a power source using the provided
power cable. - Ensure that the power source meets the required voltage and
frequency specifications. - If using the TX-H60 model, ensure that the pressure releasing
valve is properly installed. - If using the TX-H100 model, ensure that the pressure gauge is
properly installed.
2. Filling with Water
- Locate the water inlet on the generator.
- Open the water inlet cap.
- Pour distilled water into the generator until the water level
reaches the specified mark. - Close the water inlet cap tightly.
3. Power On
- Switch on the power button located on the generator.
- Wait for the generator to start producing ox y-hydrogen
gas.
4. Adjusting Pressure (TX-H60 and TX-H100 only)
- If using the TX-H60 model, monitor the pressure gauge and
ensure it remains within the recommended range. - If the pressure exceeds the recommended range, release some gas
through the pressure releasing valve. - If using the TX-H100 model, monitor the pressure gauge and make
necessary adjustments using the pressure adjustment knob.
5. Product Shutdown
- Switch off the power button on the generator.
- Allow the generator to cool down before handling or
storing.
For further information and safety precautions, refer to the
complete user manual provided with the product.
Ox y-H ydroge n Ge ne ra t or
TX-H60
TX-H100 TX-H150
Ptxson Eco-technology Co.,Ltd.
TX-H60
TX-H100
TX-H150
TX-H60
TX-H100
TX-H150
PTXSON
note:TX-H60 has pressure releasing valve,and TX-H100 has pressure gauge.
TX-H60 TX-H100 TX-H150
