Product Information: Portable EV Charger

The Portable EV Charger is a model BCPP-A1-16 that operates with
a rated input/output voltage of 8A/10A/13A/16A. It has a total
length of 5% and operates with leakage protection, over current
protection, over voltage protection, fire protection, under voltage
protection, over temperature protection, neutral and live wire
reverse connection protection, relay adhesion protection, ground
protection, lightning protection, CP signal abnormal protection,
and anti-pressure protection. It is designed to protect the car
battery and prolong its working life by automatically powering off
after the vehicle is fully charged.

Product Usage Instructions:

Check if the socket is grounded. If not, turn on emergency
charging.
Connect the charger to the car battery and plug it into the
socket.
The charger will display a standby status on the OLED
screen.
When the vehicle is ready, the charger will begin charging
normally.
Check the OLED screen for any warnings or errors such as over
current, over temperature, or check if the socket is grounded.
In case of emergency stop charging, enter the interface for
emergency stop charging and follow the instructions to cancel
charging or contact the dealer if necessary.
To enter the interface of setting, press button 11.
In the interface of setting, reserve time and set the max
charging current or timer charging as needed.
To correct neutral and live wire reverse connection, enter
interface 10 and follow the instructions.

View Fullscreen

09 09 12
17 17

-30

Model Rated Input/Output Voltage
Operating Temperature Operating Humidity

BCPP-A1-16
8A/10A/13A/16A
5%
Leakage Protection, Over Current Protection, Over Voltage Protection, Fire Protection, Under Voltage Protection, Over Temperature Protection, Neutral and Live Wire Reverse Connection Protection, Relay Adhesion Protection, Ground Protection, Lightning Protection, CP Signal Abnormal Protection, Anti-pressure Protection

Total Length

PE-307
H07BZ5-F 3G 2.5mm²

YP-39A 20A/250V~
H05VV-F 3G 2.5mm²

BRA

Y Y 3G 2.5mm²

H05VV-F 3G 2.5mm²

Portable EV Charger User Manual
BENY.com

Leakage Protection
Relay Adhesion Protection

A
Over Current Protection

Ground Protection

L N
Neutral and Live Wire Reverse
Connection Protection

Over Temperature
Protection

Over Voltage Protection
CP
CP Signal Abnormal Protection

Under Voltage Protection

Lightning Protection

Fire Protection

Anti-pressure Protection

With full protection to avoid all kinds of charging safety hazards, it will automatic power off after the vehicle is fully charged, to protect the car battery and prolong the working life.

Build-in with Over Current Protection, Over Voltage Protection, Under Voltage Protection, Over Temperature Protection, Neutral and Live Wire Reverse Connection Protection, Relay Adhesion Protection, Ground Protection, CP Signal Abnormal Protection, Fire Protection,Anti-pressure Protection and Type B Leakage Protection. It can be charged by appointment, 0-24 hours. Adjustable Charging Current for Easy Charging. Automatically recharge after power failure recovery. With lightning protection device to ensure personal safety. With OLED screen display, more intuitive and clear. With Touch key-press, more flexible and convenient operation. IP66 protection, operating humidity range 5%-95% for indoor and outdoor. Operating temperature range: -30 ~ +50 . Standard: IEC 62752, IEC 61851-21-2.
08

Standby
The charger is ready, the vehicle is not ready. Charging normally
09

OLED Screen Status

CP Vol

Over Current

Over Temp

Check if socket
is grounded, if without
grounding wire, you can turn on emergency charging

Neutral and live Neutral and Correct the

Invert N-L

wire reverse connection

live wire reverse

Neutral and live wire connection

connection