Sound Gasket Submittal Sheet
Product Information
- Stock No.: 9290
- Length: 10′
- Pieces per Box: 20
- Description: Sound Gasket is a vinyl accessory that provides
smoke and sound ratings for both dynamic and static joints. The
unique vinyl profile provides a seal along the inside leg to
prevent sound flanking along the leg of the slotted and framing
screws while the outer bubble gasket will compress to seal against
uneven concrete.
Product Usage Instructions
- Step 1: Prepare the surface where the Sound Gasket will be
installed. Ensure it is clean, dry, and free from any debris. - Step 2: Cut the Sound Deadening Foam and Installation Adhesive
Foam into appropriate lengths for your project. The foam should be
2mm thick and 1/2 inch wide. - Step 3: Apply the Sound Deadening Foam along the inside leg of
the joint or screw area where you want to prevent sound flanking.
Press it firmly to ensure proper adhesion. - Step 4: Apply the Installation Adhesive Foam along the same
area as the Sound Deadening Foam, but on the outer side. This foam
will compress to seal against uneven concrete surfaces. - Step 5: Repeat steps 3 and 4 for all joints or screw areas
where you want to install the Sound Gasket. - Step 6: Once all the foam strips are in place, carefully align
and position the Sound Gasket over them, ensuring that the foam
strips are completely covered. - Step 7: Press the Sound Gasket firmly onto the surface, making
sure it adheres properly to the foam strips and the surrounding
area. - Step 8: Allow the adhesive to fully cure as per the
manufacturer’s instructions before subjecting the installed Sound
Gasket to any stress or load.
Sound Gasket® Submittal Sheet
STOCK NO. 9290
LENGTH 10′
PCS. PER BOX 20
Description: Sound Gasket is a vinyl accessory that provides smoke and sound ratings for both dynamic and static joints. The unique vinyl profile provides a seal along the inside leg to prevent sound flanking along the leg of the slotted and framing screws while the outer bubble gasket will compress to seal against uneven concrete.
· Sound Gasket is mechanically or adhesively fastened to the leg of the track. It features a / ” hollow bubble gasket on the upper corner that is easily compressed to seal against uneven concrete or fluted decks. Onceproperly installed the Sound Gasket provides an unbreakable seal, to provide long term smoke and sound protection. · Sound Gasket takes the place of acoustic sealant at building joints. · Sound Gasket can be used on head-of-wall, bottom-of-wall, and wall to wall building joints. · Sound Gasket is tested for air leakage for compliance with Section 713.6 of IBC and CBC. · Sound Gasket is manufactured is a light blue color vinyl that is easily identified by the inspector. · Sound Gasket is paintable, always use high-quality paint. · Sound Gasket installs fully cured and has no installation temperature or humidity restrictions. · Sound Gasket installs on both sides of the wall and comes in 10′ lengths. · Sound Gasket can be installed in the field or pre-installed to the track prior to installing track in place. · Sound Gasket provides up to 1″ overall unencumbered movement. · Sound Gasket is very durable and is not easily damaged, once installed it will not delaminate, it will not take in water, and it will not shrink or harden over time. · Sound Gasket provides premium STC ratings.
· STC 51 on 3 / ” 20 EQ studs unbalanced walls. · STC 55 on 3 / ” 20 EQ studs balanced walls. · STC 68 on 20 EQ double wall balanced.
1/8″
Ø 3/8″
Advantages: Made from rust proof, dent resistant PVC to reduce jobsite and handling damage. Installs fully cured and has no installation temperature or humidity restrictions. Limitations: Product is designed for interior use. Surface Characteristics: Trim-Tex® products are made from PVC. Installation: Ensure wall sections are built to UL 2079 specifications. Detailed installation instructions can be found at www.trim-tex.com. Accessories: Safety Products distributed by Trim-Tex®. Applicable Standards: Rigid PVC products made by Trim-Tex® achieve a Class A rating for flame spread and smoke developed when tested under ASTM E84. ASTM & Code Standards: · Sound Tested in accordance with ASTM E90-09 · Air leakage tests conducted for compliance with Section 713.6 of IBC and CBC. · U.S. Patent No. 10,246,871; 10,753,084; 10,954,670
Job Name Contractor Date
Sound Deadening Foam: Non Release Layer (2mm Thick x 1/2″Wide)
Installation Adhesive Foam: Release Layer (2mm Thick x 1/2″ Wide)
13/16″ 1/2″
Approvals (Signatures or Stamps)
3700 W Pratt Avenue, Lincolnwood, IL 60712 · (800) 874-2333 · trim-tex.com
Plastic & Vinyl Drywall Corner Beads & Finishing | Trim-Tex
Plastic & Vinyl Drywall Corner Beads & Finishing | Trim-Tex
