Linea-HE 14.4W Linear LED

Product code: ML05

Website: mondolux.com.au

Instruction Manual

Notes

This strip requires constant voltage with 24V DC safety
input.
Do not connect the strip (low voltage 12V, 24V) directly to
240V.
Maximum running length of the strip without voltage drop is 5m.
For longer lengths contact Mondolux.
Make sure when one end of the strip is connected to the driver,
the other end is disconnected. Otherwise, there is a risk of
damaging the strips.
Driver power calculation: (Length of LED) x (Power) x (1.1) =
Minimum power requirement of the driver.
Do not attempt to touch the LED chips. The static electricity
of the fingers might damage them.
Cut through the scissors symbol on the LED strip, for desired
lengths.
LED strip comes with 3m adhesive tape, making the installation
easy on any surface.
Available as a 5m continuous roll, in aluminum foil bag.
Heavy items must not be placed on the packaging box.
If you have any questions about this product, please contact
Mondolux.

Handling Instructions

Do not twist the LED strip.
Do not remove LED strip completely from the roll, before
installation.
While cutting the LED strip, do not bend at any point other
than the scissors symbol. Make sure the curvature is maintained
below 120mm and the LED strip is facing upwards.

Product Usage Instructions

Before using the Linea-HE 14.4W Linear LED, please read and
understand the instructions and notes provided in the instruction
manual.

Ensure that the strip is connected to a constant voltage with
24V DC safety input. Do not connect the strip (low voltage 12V,
24V) directly to 240V to prevent damaging the strip.
The maximum running length of the strip without voltage drop is
5m. If you require longer lengths, please contact Mondolux for
assistance.
When connecting one end of the strip to the driver, ensure that
the other end is disconnected to avoid damaging the strips.
Calculate the minimum power requirement of the driver using the
formula (Length of LED) x (Power) x (1.1) before using the
strip.
Do not touch the LED chips as static electricity from fingers
may damage them.
Cut through the scissors symbol on the LED strip to achieve
desired lengths for installation.
The LED strip comes with 3m adhesive tape, making it easy to
install on any surface.
Do not place heavy items on the packaging box to avoid damaging
the product.
Follow handling instructions provided in the instruction manual
to prevent damaging the LED strip during installation.

If you have any questions or concerns about using the Linea-HE
14.4W Linear LED, please contact Mondolux for assistance.

View Fullscreen

Linea-HE 14.4W

LINEAR LED

Product code ML05

mondolux.com.au

Instruction Manual
Notes
1. This strip requires constant voltage with 24V DC safety input. 2. Do not connect the strip (low voltage 12V, 24V) directly to 240V. 3. Maximum running length of the strip without voltage drop is 5m. For longer lengths
contact Mondolux. 4. Make sure when one end of the strip is connected to the driver, the other end is
disconnected. Otherwise, there is a risk of damaging the strips. 5. Driver power calculation: (Length of LED) x (Power) x (1.1) = Minimum power
requirement of the driver. 6. Do not attempt to touch the LED chips. The static electricity of the fingers might
damage them. 7. Cut through the scissors symbol on the LED strip, for desired lengths. 8. LED strip comes with 3m adhesive tape, making the installation easy on any
surface. 9. Available as a 5m continuous roll, in aluminum foil bag. 10. Heavy items must not be placed on the packaging box. 11. If you have any questions about this product, please contact Mondolux.
Handling Instructions

Do not twist the LED strip.

Do not bend the LED strip beyond 90° curvature and 120mm radian.

Do not remove LED strip completely from the roll, before installation.

While cutting the LED strip, do not bend at any point other than the scissors symbol. Make sure the curvature is maintained below
120mm and the LED strip is facing upwards.