ML15 Linea COB LED Strip Light

Linea COB LED Strip – Product Information and Usage
Instructions

Product Information

• Product Name: Linea COB LED Strip
• Product Code: ML15
• Manufacturer: Mondolux
• Website: https://mondolux.com.au/
• Operating Voltage: Low voltage 12V or 24V DC
• Maximum Running Length: 5m without voltage drop
• Driver Power Calculation: (Length of LED) x (Power) x (1.1) =
  Minimum power requirement of the driver
• Adhesive Tape: 3m
• Packaging: Available as a 5m continuous roll, in antistatic
  aluminum foil bag

Usage Instructions

1. Do not connect the LED strip directly to 240V AC power.
2. Use a constant voltage with 24V DC safety input to power the
   LED strip.
3. The maximum running length of the LED strip without voltage
   drop is 5m. For longer lengths, contact Mondolux.
4. The LED strip should not be curved to a diameter of 60mm
   following a radian.
5. When connecting the LED strip to a driver, make sure to
   disconnect the other end to avoid damaging the strips.
6. To calculate the minimum power requirement of the driver, use
   this formula: (Length of LED) x (Power) x (1.1) = Minimum power
   requirement of the driver.
7. Do not touch the illuminating surface of the LED strip as the
   static electricity from fingers may damage the LEDs.
8. To cut the LED strip to the desired length, use scissors and
   cut through the scissors symbol on the strip. Do not cut the LED
   strip while it is working.
9. The LED strip comes with 3m adhesive tape, making installation
   easy on any surface.
10. Heavy items must not be placed on the packaging box.
11. If you have any questions about this product, please contact
    Mondolux.

Handling Instructions

• Do not twist the LED strip.
• Do not completely remove the LED strip from the roll before
  installation.
• While cutting the LED strip, do not bend it at any point other
  than the scissors symbol. Make sure the curvature is maintained
  below 120mm and the LED strip is facing upwards.

Linea COB LED Strip

LINEAR LED

Product code ML15

mondolux.com.au

Instruction Manual
Notes
1. Do not connect the strip (low voltage 12V, 24V) directly to 240V. 2. This strip requires constant voltage with 24V DC safety input. 3. Maximum running length of the strip without voltage drop is 5m. For longer lengths contact
Mondolux. 4. Should not be curving in diameter 60mm following radian. 5. Make sure when one end of the strip is connected to the driver, the other end is disconnected.
Otherwise, there is a risk of damaging the strips. 6. Driver power calculation: (Length of LED) x (Power) x (1.1) = Minimum power requirement of
the driver. 7. Do not attempt to touch the illuminating surface. The static electricity of the fingers might
damage the LED’s. 8. Cut through the scissors symbol on the LED strip, for desired lengths. Do not cut LED strip while
it is working. 9. LED strip comes with 3m adhesive tape, making the installation easy on any surface. 10. Available as a 5m continuous roll, in antistatic aluminum foil bag. 11. Heavy items must not be placed on the packaging box. 12. If you have any questions about this product, please contact Mondolux.
Handling Instructions

Do not twist the LED strip.

Do not bend the LED strip beyond 90°curvature and 120mm radian.

Do not remove LED strip completely from the roll, before installation.

While cutting the LED strip, do not bend at any point other than the scissors symbol. Make sure the curvature is maintained below 120mm and
the LED strip is facing upwards.