Quoizel Tf5624mbk Tiffany 2 Light 14 Inch Matte Black Flush Mount Ceiling Light Installation Guide

TF5624MBK Tiffany 2 Light 14 Inch Matte Black Flush Mount Ceiling Light

Product Information: TF5624MBK

The TF5624MBK is a Tiffany style lamp fixture that comes with a
fixture body, a spacer tube, a flat washer, a nipple with hex nut,
a check ring, a small knurled nut, a big knurled nut, a shade, a
rubber washer, a finial, a crossbar assembly, and wire connectors.
It has a medium (E26) bulb base type and can accommodate bulbs up
to 60W MAX (not included). The lamp fixture is designed with an oil
film applied to the shade that protects it from scratches during
shipment.

Product Usage Instructions

1. Care of Tiffany Style Shade: Remove excess oil
   film from the Tiffany shade using a paper towel if the oil applied
   is too heavy. For general cleaning, use a gentle lemon oil-based
   furniture polish applied to a soft cloth and wipe gently. If a
   white powder appears on the soldered joints of the Tiffany shade,
   use a small amount of lemon oil or mineral oil applied directly to
   oxidized areas and the soldered area will return to like new.
2. Care and Maintenance: If you need further
   assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00am –
   5:00pm EST), or visit us online at www.quoizel.com.
3. Installation:
   1. Install the nipple with hex nut to the fixture body.
   2. Install the crossbar assembly to the outlet box.
   3. Wire the fixture as follows:
      • White wire from supply to white wire from fixture.
      • Black (or red) wire from supply to black wire from
        fixture.
      • Ground wire from supply to ground wire from fixture using the
        green ground screw.
   4. Install the fixture body to the crossbar assembly.
   5. Install two correct bulbs referring to fixture markings and/or
      labels for maximum wattage.
   6. Install the spacer tube.
   7. Install the shade using the big knurled nut, flat washer, small
      knurled nut, and rubber washer.

Your installation is now complete! Restore electricity and save
this sheet for future reference.

INSTALLATION GUIDE FOR TF5624MBK

SAFETY INFORMATION

Released Date: 2022-03-03

Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING · RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. · RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture. CAUTION · For your safety, read instructions completely before beginning installation. · If in doubt about electrical installation, consult a licensed electrician. · Turn off electricity to fixture before replacing the bulb(s). TOOLS REQUIRED

CARE OF TIFFANY STYLE SHADE
A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of Tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the Tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

CARE AND MAINTENANCE
· Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.

PACKAGE CONTENTS
Fixture Body A x1

Spacer Tube C x1

G

Flat Washer x1

B

Nipple with Hex Nut x1

MOUNTING HARDWARE

Check Ring D x1
Small Knurled Nut E x1
Big Knurled Nut F x1

H

Shade x1

I

Rubber Washer x1

Finial J x1

AA

Crossbar Assembly x1

Wire Connector BB x 3

CC

Outlet Box Screw x2

– 1 of 2 –

INSTALLATION
1 Install Nipple with Hex Nut to Fixture Body

2 Install Crossbar Assembly
Outlet box

3 Wiring

White wire from supply Black (or red) wire from supply

White wire from fixture Black wire from fixture

Ground wire from supply

Ground wire from fixture

Green ground screw

4 Install Fixture Body to Crossbar Assembly

5 Install Bulbs
Install two correct bulbs referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included):
60W MAX

6 Install Spacer Tube

BULB BASE TYPE BULB TYPE

Medium (E26)

TYPE A

7 Install Shade

Big Knurled Nut

Flat Washer

Small Knurled Nut

Rubber Washer

Your installation is now complete! Restore electricity and save this sheet for future reference.
– 2 of 2 –

References

• Quoizel | Artisans In Lighting