KEUCO 10601182 Adhesive Attachment
Mounting instruction
- Bonding set
- Sand the adhesive surface of the mounting plate with the abrasive fl eece and then thoroughly clean the mounting plate and the tile surface withthe i.CLEANER cleaning cloth.
- Roll up the space containing the adhesive, pushing the adhesive in the direction of the narrow reaction space until the dividing seam bursts open.
- Push the adhesive into the reaction space by rolling up the pouch. Mix the adhesive together with the reactant in this space.
- Cut open the pouch and squeeze three hazelnut-sized amounts to the mounting plate. Use cardboard if necessary to hold in place.
- Press on the mounting plate and allow it to harden for 4 hours. After that carefully remove residual adhesive and mount the accessory.
