KEUCO 04994 000900 Glue kit
Bonding set
Mounting instruction
Sand the adhesive surface of the mounting plate with the abrasive fleece and then thoroughly clean the mounting plate and the tile surface with the i.CLEANER cleaning cloth.
Roll up the space containing the adhesive, pushing the adhesive in the direction of the narrow reaction space until the dividing seam bursts open
Push the adhesive into the reaction space by rolling up the pouch.
Mix the adhesive together with the reactant in this space.
Cut open the pouch and squeeze eight equal amounts to the mounting plate. Use cardboard if necessary to hold in place.
Press on the mounting plate and allow it to harden for 4 hours. After that carefully remove residual adhesive and mount the accessory.
