H0268 Wade 5 Light Matte Black and Sycamore Rustic Cage Chandelier
Product Information
The product is a light fixture with the model number H0268. It
comes with an installation manual that provides detailed
instructions on how to assemble and install the fixture. The
fixture requires electrical wiring and should be installed
according to local electrical codes for wiring and grounding
requirements. The product includes a hardware package that consists
of the following components:
- Mounting Strap Unit (A)
- Mounting Screw (B)
- Wire Connector (C)
- Finial (D)
- Quick Link (E)
Product Usage Instructions
To ensure safety and proper installation of the fixture, follow
these steps:
- Before starting the installation, turn off the power at the
fuse or circuit box. - Attach the mounting strap unit (A) to the outlet box using two
mounting screws (B).
- Connect the fixture ground wire to the house ground wire using
a wire connector (C).
- Take a quick link (E), open the locking tube, and hook it onto
the loop of the fixture canopy and the loop of the upper rod. Close
back the locking tube of the quick link (E).
- Attach the cord clamp onto the mounting strap unit (A).
- Attach the canopy to the mounting strap unit (A) and secure it
with a finial (D).
- Install 5 x 60W max. medium base bulbs (not included) according
to the relamping label at the socket area or packaging. Make sure
not to exceed the maximum wattage allowed.
- Turn on the power at the fuse or circuit box.
The spare parts list is available for re-order in case any
components are damaged or missing. The list includes the following
parts:
- Mounting Strap Unit (A)
- Mounting Screw (B)
- Wire Connector (C)
- Finial (D)
- Loop Lock (E)
- Mounting Hardware 6472MM (1 SET)
- 12 Rod 3318RD
- 6 Rod 3319RD
- 3 Rod 3320RD
Product dimensions:
- A: 10-3/4~73-1/4
- B: 36-3/4
- C: 12-3/4
Please refer to the provided images for better understanding of
the installation steps.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
H0268
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THIS INSTRUCTIONS.
Hardware Package (included):
Mounting Strap Unit (A)
Mounting Screw (B)
Wire Connector (C)
Finial (D)
Quick Link (E)
Installation Steps
Turn off the power at fuse or circuit box.
1. Attach the mounting strap unit (A) to the outlet box using two mounting screws (B).
Cord Clamp
2. Rod Connections: a. Thread the fixture wire from the fixture through the lower rod, and then secure the lower rod onto fixture using the threaded pipe. b. Thread the fixture wire through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe. c. Thread the fixture wire through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe. d. Thread the fixture wire through the loop and fixture canopy, and then secure the loop onto the upper rod using the threaded pipe. Note: Length adjustable from 10-3/4″ to 73-1/4″. Use fewer rods if shorter length is desired.
Finial (D)
Outlet Box House Ground Wire Green Ground Screw Mounting Strap Unit (A) Threaded Pipe Mounting Screw (B) Fixture Ground Wire Wire Connector (C)
Canopy Loop
Quick Link (E)
Loop
Upper Rod
Middle Rod
3. Take a quick link (E), open the locking tube, and then hook it onto the loop of fixture canopy and the loop of upper rod. Close bak the looking tube of the quick link (E).
4. Attach the cord clamp onto the mounting strap unit (A).
Lower Rod Threaded Pipe
Max.60W Medium Base Bulb (not included)
5. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: —Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source. —Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source. —Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the house ground wire with a wire connector (C). Carefully put the wires back into the outlet box.
220214
6. Attach the canopy to the mounting strap unit (A) and secure it with a finial (D). 7. Install 5 x 60W max.medium base bulbs (not included). See relamping label at socket area or packaging for
maximum wattage allowed. Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap Unit (A)
Mounting Screw (B)
Wire Connector (C)
Finial (D)
Loop Lock (E)
Mounting Hardware 6472MM(1 SET)
12″ Rod 3318RD
6″ Rod 3319RD
3″ Rod 3320RD
A: 10-3/4″~73-1/4″ B: 36-3/4″ C: 12-3/4″
A
C
B
220214
