HPBT3261BK Over-Ear Bluetooth Headphones
User Manual
Preface
Thank you for purchasing the Nedis HPBT3261BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis HPBT3261BK are Bluetooth headphones with Noise Cancelling.
The product is great for travel and can be stored in the included travel case.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product | Over-Ear Bluetooth Headphones |
Article number | HPBT3261BK |
Frequency range | 2402 – 2480 MHz |
Bluetooth® version | 5.0 |
Maximum transmission power | 4 dBm |
Battery capacity | 3.7V / 650 mAh built-in Lithium battery |
Charging input power | 5 VDC ; 1 A |
Maximum Charging time | Up to 1.5 hours |
Maximum Playback Time | Up to 24 hours |
Maximum Standby Time | Up to 300 hours |
Driver unit | 40 mm |
Impedance | 32 Ω |
Frequency response | 20 – 20.000 Hz |
Wireless Transmission effective distance | Up to 10 meters |
Headphones sensitivity | 102 ± 3 dB |
Noise reduction performance | Up to 25 dB |
Main parts (image A)
 |
A |
1. Next song / Volume up |
2. Previous song / Volume down |
3. Power/Play / Pause |
4. Status indicator LED |
5. USB-C port |
6. Microphone |
7. Noise Cancelling button |
8. Travel case |
9. USB power cable |
10. Audio cable |
Safety instructions
WARNING
- Only use the product as described in this manual.
- Read the manual carefully before use. Keep the manual for future reference.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not expose the product to water or moisture.
- Do not drop the product and avoid bumping.
- Do not open the product.
- Keep the product out of reach from children.
- Disconnect the product from the electrical outlet and other equipment if problems occur.
- Do not leave the product on prolonged charge when not in use.
- After extended periods of storage, it may be necessary to charge and discharge the product several times to obtain maximum performance.
- Do not bend or twist the headband to avoid deformation.
- Listening on high volume for a long time will damage your hearing.
- Audiologists advise not listening on a high volume. If tinnitus occurs, turn the volume down or stop playing. Avoid a sudden increase in volume.
- Do not use the headphones in a (dangerous) place where you cannot hear the surrounding sounds.
- Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Safety symbols on the product
Icon | Description |
 | Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment. |
 | Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin. |
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Use
- Charging the product
- Connect the power cable to A5 and a USB adapter. Connect the USB adapter to a power outlet.
- A4 lights up red to indicate that the headphones are charging.
- A4 turns off when the battery is fully charged.
Switching on the product
- Press and hold A3 for 3 seconds.
- If the headphones are not paired within 5 minutes, they switch off.
- Pairing the headphones to a Bluetooth audio source
1. Switch on the product.
- A4 blinks red and blue to indicate pairing mode is active.
2. Enable Bluetooth on the device you want to pair the headphones with.
3. Select “HPBT3261BK” from the list of available Bluetooth devices on your device.
- When paired, A4 lights up blue.
- If the headphones have been paired with another device before, make sure that device is switched off.
- If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.
- When the batteries of the headphones are drained, you can still listen to your audio source by connecting the headphones directly to the audio source, using the audio cable.
Controlling the volume
- Press A1 to increase the volume.
- Press A2 to decrease the volume.
Controlling the music
- Press A3 to play or pause the music.
- Press and hold A1 to skip to the next song.
- Press and hold A2 to go back to the start of the song. Press and hold again within 2 seconds to go to the previous song.
Making phone calls
- To answer an incoming call, press A3.
- To reject an incoming call, press and hold A3 for 2 seconds.
- To end a call, press A3.
- To quickly redial the last called number, double press A3.
Using Noise Cancelling
- Press and hold A7 for 1 second to toggle Noise Cancelling on or off.
- A7 lights up green when Noise Cancelling is enabled.
Switching off the product
- Press and hold A3 for 3 seconds to switch off the headphones.
- When not in use, store the product in the provided case to avoid damage.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not clean the inside of the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
 | This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment. |
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product HPBT3261BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/HPBT3261BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
