O Erre Tb 10 Axial Fan User Manual

TB 10 Axial Fan

Product Information: Aspiratore Elicoidale – Axial Fan

The Aspiratore Elicoidale – Axial Fan is a ventilation fan
designed to provide efficient air flow in homes or offices. The
product is available in three models: TB 10, TB 12, and TB 15. The
product has a maximum pressure of 6.1 mm H O and a maximum flow
rate of 265 m3/h. The product is available in a voltage range of
220-240V and a frequency of 50Hz. The product comes with
accessories such as grilles, shutters, controllers, sensors,
timertronics, and timermatics.

Product Usage Instructions:

1. Select the appropriate model of the Aspiratore Elicoidale –
   Axial Fan based on your ventilation needs.
2. Ensure that the voltage and frequency of the product match your
   electrical specifications.
3. Install the fan in a suitable location for optimal air
   flow.
4. Connect the fan to a power source using the appropriate wiring
   and ensure that the wiring is properly grounded.
5. Turn on the fan and adjust the speed as necessary using the
   provided controllers.
6. Optionally, install accessories such as grilles, shutters,
   sensors, timertronics, or timermatics to enhance the performance of
   the fan.

TB
ASPIRATORE ELICOIDALE – AXIAL FAN

MODELLO MODEL TB 10 TB 12 TB 15

ØA

B

ØC

96 97 55 116 97 55 147 113 55

IPX4
Aspiratori elicoidali per espulsione o immissione aria in brevi condotti. · Modelli a scomparsa per l’installazione in condotti Ø 100, 120 e 150
mm; · Corpo e ventola in polipropilene; · Motore a induzione autoprotetto dall’impedenza (TB 10) e con
protezione termica (TB 12 e TB 15); · Basso assorbimento e limitata rumorosità; · Adatto a qualsiasi impiego; · Grado di protezione: IPX4, (Norma EN 60529); · Impiego: sia in espulsione che in immissione e/o in posizione
intermedia lungo le tubazionI; · Conformi alla norma EN 60335-2-80; · POSIZIONAMENTO: intubato.

Axial duct fans to extract or intake air, also suitable to “boost” extraction/intake in existing system. · Retractable model for installation in ducts Ø 100 – 125 – 150 mm; · Body and impeller made of polypropylene talc filled material; · Induction motor impedence protected on TB 10 and thermally
protected on TB12 and TB15; · Low power consumption and low sound level; · Suitable for different type of installation; · IPX4 protected (EN 60529); · Application: both for extraction and intake and/or in an
intermediate position along the duct; · In accordance with Standard EN 60335-2-80; · POSITIONING: duct mounting.

DATI TECNICI – TECHNICAL DATA

MODELLO

CODICE

Ø FORO TENSIONE

MODEL

CODE

Ø HOLE

VOLTAGE

TB 10 TB 12 TB 15

(mm)

0018400

100

0019400

120

0019500

150

(Volt) 220-240 220-240 220-240

FREQUENZA FREQUENCY
(Hz) 50 50 50

PORTATA FLOW RATE
(m3/h) 85 150 265

PRESS. MAX MAX PRESS.
(mm H O) 2 3,0 4,0 6,1

PRESS.MAX MAX PRESS.
(Pa) 30 39 60

POTENZA POWER
(W) 10 15 25

RUMOROSITÀ NOISE dB(A)
3m
42 43 50

PESO WEIGHT
(Kg) 0,5 0,5 0,7

GRAFICI DI PORTATA – FLOW CHARTS

TB 10

TB 12

PRESSIONE – PRESSURE PRESSIONE – PRESSURE

28

PORTATA – FLOW RATE

PORTATA – FLOW RATE

DOMUS

PRESSIONE – PRESSURE

TB 15
PORTATA – FLOW RATE

www.oerre.it

ACCESSORI (PAGINA 70) – ACCESSORIES (PAGE 70)

Griglia Grille

Serranda Shutter

Regolatori Controllers

Sensori Sensors

Timertronic Timertronic

Timermatic Timermatic

DOMUS

29