QYC1500 Adjustable Trailer Dolly

Product Information: Manual Trailer Mover

The Manual Trailer Mover is a tool designed to help move
trailers of up to 1500lbs in weight. It comes with a handle, hitch
ball, swivel casters, and pneumatic tires. The maximum load
capacity is 420lbs and it is made of steel. The product can be used
in two modes; hand-pulling and car-hanging mode. The adjustable
height of the hitch ball is between 60-90cm. The product is
manufactured by VEVOR.

Safety Instructions

It is important to read and understand all instructions before
using the product to avoid serious injury. The following safety
instructions should be followed:

• Check tire pressure before use
• Check for loose screws and tighten them if necessary
• Do not overload the product beyond the maximum load of
  420lbs
• Do not sit, stand or climb on the product
• Do not allow children to play with or near the product
• Do not lift while loaded
• Push/pull using the supplied handle only to prevent
  tipping
• Inspect before every use and do not use if any parts are loose
  or damaged
• Dry the product before storage to avoid rusting of bolts
  affecting use
• Ensure the small wheel is straightened before use

Usage Instructions

Follow the below instructions for safe operation of the Manual
Trailer Mover:

1. Confirm that all parts are locked and assembled correctly using
   the manual installation method and tools provided.
2. Inflate the tires to a pressure of 27KPa, do not exceed the
   prescribed tire pressure to avoid bursting.
3. Check the product carefully before use for any defects or
   damages.
4. Attach the hitch ball to the trailer and adjust the height of
   the hitch ball to the appropriate level.
5. Push/pull using the handle provided and move the trailer in the
   desired direction.

If you have any questions or require technical support, please
contact VEVOR at [email protected]. Please read all manual
instructions carefully before operating the product.

Technical Support and E-Warranty Certificate www.vevor.com/support
MANUAL TRAILER MOVER USER MANUAL
MODEL:QYC1500
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

MODEL:QYC1500

MANUAL TRAILER MOVER

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to

contact us:

[email protected]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

-1-

SAFETY INSTRUCTIONS
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. 1.Check whether the tire has enough gas before use. If the tire gas is not enough, please inflate the tire before use. 2.Check whether the screw part is loose, if yes, please tighten it. 3.Do not overload.The maximum load is 420lbs.
CAUTION: Please read the instructions for safe operation carefully.
Assembly Precautions 1.Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3.Keep assembly area clean and well lit. 4.Keep bystanders out of the area during assembly. 5.Do not assemble when tired or when under the influence of alcohol, drugs or medication. 6.Weight capacity and other product capabilities apply to properly and completely assembled product only. 7.Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded boat trailer dolly.
Use Precautions TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. Do not sit,stand or climb on this item. 2. This product is not a toy. Do not allow children to play with or near this item. 3. Do not lift while loaded.
-2-

4. To prevent tipping, push/pull using supplied handle only. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged. 7. After use, please dry before storage to avoid rusting of bolts affecting use. 8.This product can be pulled for people or cars. Please check it carefully before use.
Special Attention: The small wheel must be straightened before use,and the accessories will bend after the force is not straightened !
SAVE THESE INSTRUCTIONS
MODEL AND PARAMETERS

Model Maximum Load
Product Size
Wheel
Hitch Ball Adjustable Height
Material

QYC1500 1500lbs (Hand-pulling Mode) LxWxH=127x109x83.5 cm (Car-hanging Mode) LxWxH=138x109x83.5 cm 16″ Pneumatic Tire 8″ Swivel Caster Diameter:2″ 60-90cm
Steel

-3-

STRUCTURE DIAGRAM

2

1

6 3 5

4
1. Handle 2.Hitch Ball 3.Swivel Caster 4.Pneumatic Tire 5.Hitch Ball Cover 6.Angle Adjustment

-4-

COMPONENTS

1 ×2 4 ×1

2 ×1

3 ×1

5 ×1

6 ×1

7 ×2

8 ×1

9 ×1

10 ×2

11 ×6
M10*70

12 ×10
M8*20

-5-

13 ×10
M8

14 ×2
M20

×1

16 x4
20
19 x4
M10*20

17 x10
8
20 x10
M10

18 x10
10

-6-

ASSEMBLY

Tools needed

Socket Wrench Manual Installation Method

Connect to with

Connect to with ++

Connect to with ++

Put on ,then put on Connect and with++

Connect and with ++ Connect to with +
Re-confirm that all parts are locked,and then Inflate the tires to a pressure of 27KPa ,and it’s ready to go. NOTE that do not exceed the prescribed tire pressure to avoid bursting.
-7-

Vehicle Installation Method Step 1: Connect and with ++
Step 2: Install the hitch ball cover, insert into and lock tightly.
Connect to with ++
Connect and with +
Re-confirm that all parts are locked,and then Inflate the tires to a pressure of 27KPa ,and it’s ready to go. NOTE that do not exceed the prescribed tire pressure to avoid bursting.
-8-

MAINTENANCE Do not overload. After use, please dry before storage to avoid rusting of bolts affecting
use. Check bolts regularly for looseness.

Importer: WAITCHX Address: 250 bis boulevard Saint-Germain 75007 Paris Importer: FREE MOOD LTD Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Wuqiang Xintianhong Tool Manufacturing Co., LTD
Address Beiche Village, Wuqiang County, Hengshui City, Hebei Province

Made In China

UK

REP

EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH

EUREP GmbH
EC REP Unterlettenweg 1a, 85051
Ingolstadt, Germany

-9-

Technical Support and E-Warranty Certificate www.vevor.com/support

References

• vevor.com/support
• vevor.com/support