METZ 32MTB7000Z TV Instructions
Nessesary tools
Screw driver PH2 
Disassembly the rear panel
a) Remove screws with a screw driver PH2.
b) Slightly bend open the tabs and lift the rear wall at the same time.
Disassembly of the printed circuit boards
Remove screws with a screw driver PH2.
Elkos may contain residual charges.
Technical changes and errors excepted!
Metz Consumer Electronics GmbH
Ohmstrasse 55 – 90513 Zirndorf
Tel. (0911) 9706-0 – [email protected]
