32MTC6110Z Smart LED TV
Product Information: Product Name: Metz 32MTC6110Z
Manufacturer: Metz Consumer Electronics GmbH Address: Ohmstrasse 55
– 90513 Zirndorf Contact: Tel. (0911) 9706-0, [email protected]
Product Usage Instructions: Tools
Required: – Screw driver PH2 Disassembly
Instructions: 1. Disassembly of the Rear Panel: a) Use a
screw driver PH2 to remove the screws. b) Slightly bend open the
tabs and lift the rear wall at the same time. 2. Disassembly of the
Printed Circuit Boards: – Use a screw driver PH2 to remove the
screws. Please refer to the provided diagram (U2199_40319_00) for
better understanding of the disassembly process. Note: Make sure to
follow the instructions carefully to avoid any damage to the
product.
Metz Consumer Electronics GmbH Ohmstrasse 55 – 90513 Zirndorf
Tel. (0911) 9706-0 – [email protected]
Metz 32MTC6110Z
Notwendige Werkzeuge: Nessesary tools:
Schraubendreher PH2 Screw driver PH2
Demontageanleitung Disassembly instructions
PH2
1 Demontage der Rückwand
a) Schrauben mit einem Schraubendreher PH2 entfernen. b) Laschen leicht aufbiegen und Rückwand gleichzeitig anheben.
1 Disassembly the rear panel
a) Remove screws with a screw driver PH2. b) Slightly bend open the tabs and lift the rear wall at the same time.
2 Demontage der Leiterplatten
Elkos können Restladung enthalten. Elkos may contain residual charges.
Schrauben mit einem Schraubendreher PH2 entfernen.
2 Disassembly of the printed circuit boards
Remove screws with a screw driver PH2.
PH2 PH2
Technische Änderungen und Irrtümer vorbehalten! Technical changes and errors excepted!
U2199_40319_00
