Metz 32mtb2000z Tv Instructions

32MTB2000Z TV

Product Information:

Product Name: Metz 32MTB2000Z

Manufacturer: Metz Consumer Electronics GmbH

Address: Ohmstrasse 55 – 90513 Zirndorf

Contact Information: Tel. (0911) 9706-0, Email:
[email protected]

Product Usage Instructions:

1. Before starting any disassembly, ensure that the mains plug is
   pulled out to disconnect the power.
2. To disassemble the rear panel:
   1. Use a screwdriver PH2 to remove the screws.
   2. Slightly bend open the tabs and lift the rear wall at the same
      time.
3. To disassemble the printed circuit boards:
   1. Remove screws with a screwdriver PH2.
4. Take caution when handling Elkos as they may contain residual
   charges.

For any further assistance or inquiries, please contact Metz
Consumer Electronics GmbH using the provided contact
information.

U2199_40229_00

Metz Consumer Electronics GmbH Ohmstrasse 55 – 90513 Zirndorf
Tel. (0911) 9706-0 – [email protected]
Metz 32MTB2000Z
Notwendige Werkzeuge: Nessesary tools:
Schraubendreher PH2 Screw driver PH2

Demontageanleitung Disassembly instructions
PH2

Vor Entfernen der Rückwand

Netzstecker ziehen.

PH2

Pull out the mains plug before

removing the rear panel.

PH2 PH2

1 Demontage der Rückwand
a) Schrauben mit einem Schraubendreher PH2 entfernen. b) Laschen leicht aufbiegen und Rückwand gleichzeitig anheben.
1 Disassembly the rear panel
a) Remove screws with a screw driver PH2. b) Slightly bend open the tabs and lift the rear wall at the same time.

PH2 PH2

2 Demontage der Leiterplatten

Elkos können Restladung

PH2

enthalten.

Elkos may contain residual

charges.

Schrauben mit einem Schraubendreher PH2 entfernen.

2 Disassembly of the printed circuit boards
Remove screws with a screw driver PH2.

Technische Änderungen und Irrtümer vorbehalten! Technical changes and errors excepted!

PH2 PH2 PH2
U2199_40229_00