VicAudiophile VMT Kit
Product Information:
Product Name: VicAudiophile VMT Kit
Installation Manual: Included
Materials Included: – VicSpacer x4 – Flat Panel VMT x4 – VicPET
Wool x8 – Multifuser 64 x2 – VicFix J Profile 80mm | 3.14 x4 Flexi
Glue Ultra – VicPattern Ultra x4 – VicFix Corner 2+2 – VicFix J
Profile 595mm | 23.4 x6
Materials Not Included: – Level Caulking Gun – Measuring Tape –
Drill – 6mm Phillips Screwdriver – Wall Plugs and Screws
Product Usage Instructions:
VicSpacer Installation (Wall Installation):
1. Mark the drill holes of the VicSpacers according to the diagram.
2. If installing two or more units, pay attention to the spacing
between units. The dimensions marked between VicSpacers are for use
of only one metal joint between them.
Ceiling Installation:
1. Mark the drill holes of the VicSpacers according to the diagram.
2. If installing two or more units, pay attention to the spacing
between units. The dimensions marked between VicSpacers are for use
of only one metal joint between them.
Flat Panel VMT Installation:
1. For wall installation and if you do not want a permanent
fixation of the Flat Panel VMT, you can apply the panel directly to
the Vicspacer, inserting it inside the metal frame. 2. If you want
a more secure and permanent fixation, fix the Flat Panel VMT with
Flexi Glue Ultra by applying a bead of glue to the surface of the
plywood structure and pressing it, to ensure an even and precise
adherence. 3. For ceiling installation, the Flat Panel VMT must be
glued with Flexi Glue Ultra.
VicFix Corner Installation:
1. Mark the drill holes for fixing the VicFix Corner according to
the diagram.
VicPattern and Multifuser Wood MKII 64 Wall
Installation:
1. Define where you want to install the panels and start marking
the drill holes for fixing the profiles to the wall. 2. Turn the
panels on their back and apply the silicone drops as indicated in
the diagram. 3. Apply a blocking element such as a L profile or a
small screw to avoid the end panels from sliding off the VicFix J
profile.
Please note: It is recommended to apply a blocking element such as
a L profile or a small screw to avoid the end panels from sliding
off the VicFix J profile.
EN
VicAudiophile VMT Kit
Installation Manual
1
EN
MATERIAL NEEDED Included
VicSpacer x4
Flat Panel VMT x4
VicPET Wool x8
Multifuser 64 x2
VicFix J Profile 80mm | 3.14″ x4 Flexi Glue Ultra
VicPattern Ultra x4
VicFix Corner 2+2
VicFix J Profile 595mm | 23.4″ x6
Not Included
Level Caulking Gun
Measuring Tape
Drill
6mm Phillips Screwdriver 3
Wall Plugs and Screws
EN
VicSpacer Installation Wall Installation
1
Mark the drill holes of the VicSpacers according to the diagram.
In the case of installing two or more units, pay attention to the spacing between
units. The dimensions marked between VicSpacers are for use of only one metal joint
between them.
575 mm
22 mm
800 mm
2
4
EN
3
5
EN
Ceilling Installation
1
Mark the drill holes of the VicSpacers according to the diagram.
In the case of installing two or more units, pay attention to the spacing between
units. The dimensions marked between VicSpacers are for use of only one metal joint
between them.
575 mm
22 mm
800 mm
2
6
EN
3
Flat Panel VMT Installation
1
7
EN
2
For wall installation and if you do not want a permanent fixation of the Flat Panel
VMT, you can apply the panel directly to the Vicspacer, inserting it inside the
metal frame. If you want a more secure and permanent fixation, fix the Flat Panel
VMT with Flexi Glue Ultra by applying a bead of glue to the surface of the plywood
structure and pressing it, to ensure an even and precise adherence. For ceiling
installation, the Flat Panel VMT must be glued with Flexi Glue Ultra.
3
8
EN
VicFix Corner Installation
1
2
406 mm | 15.984″
9
EN
3
2
1
VicPattern and Multifuser Wood MKII 64 Wall Installation
1
Define where you want to install the panels and start marking the drill holes for
fixing the profiles to the wall.
257,5 mm
80 mm
10
2
4
11
3
5
575 mm
EN
EN
6
7
Turn the panels on their
back and apply the silicone
drops as indicated in the
diagram.
Steps Material
8
9
2
2
1
1
12
EN
10
2 1
11
2 1
12
2
1
13
2
1
!
Please note: It is recommended to apply a blocking element such as a L profile or a small screw to avoid the end panels to slide off the VicFix J profile.
13
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal
Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100 Info and Sales E [email protected] www.vicoustic.com
© Vicoustic, 2021 | V3
16
No parts of this document might be copied and/or published without written consent of Vicoustic.
Vicoustic – Innovative Acoustic Solutions
