2544-726 Four Light Chandelier
Product Information
The product is a light fixture with item number 2544-726,
manufactured in February 2022. The package includes a mounting
plate, ground screw, mounting screw, quick link, loop, rod, canopy,
screw, glass shade, and wire connectors. The fixture can
accommodate four medium base T10 bulbs up to 60 watts each or CFL
or LED equivalent.
Product Usage Instructions
- Before starting the installation process, shut off power at the
fuse box or circuit breaker box. - Remove the old fixture including the mounting hardware.
- Unpack your new fixture and lay out all the parts in a clean
area. Take care not to misplace any small parts necessary for
installation. - Determine desired hanging height and thread rods to all thread
of fixture body. Screw loop onto the rod. Carefully pass wires
through each rod as you assemble. - Attach the quick link to the loop on the canopy. Carefully feed
wire through the loop, quick link, and loop on the canopy. - Attach the mounting plate to the junction box with mounting
screws. The side of the mounting plate marked with GND and two
convex points must face out. - Connect the electrical wires as shown in fig 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to the mounting plate using the green screw provided. - Slide canopy over mounting plate and secure with screws.
- Install four medium base T10 bulbs up to 60 watts each or CFL
or LED equivalent in accordance with the fixture specification. Do
not exceed the maximum wattage rating. - Place the glass shade over the socket.
- Test the fixture by turning on the power at the junction
box.
Note: The illustration in Fig. 1 is for installation purposes
only and may not be identical to the fixture purchased.
INSTALLATION INSTRUCTIONS
Item#2544-726 (New. 02/18/2022) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARATION (Fig.1&Fig. 3)
Fig. 1
1. Shut of power at the fuse box or circuit breaker box and Set#A-021-118DH
remove the old fixture including the mounting hardware.
-Mounting plate
2. Carefully unpack your new fixture and lay out all the parts -Ground screw in a clean area. Take care not to misplace any small parts -Mounting screw*2
necessary for installation.
3. Determine desired hanging height and thread rods (F1, F2
and F3) to all thread (I) of fixture body. Screw loop (H1)
onto rod (F1). Carefully pass wires through each rod as
you assemble.
4. Attach quick link (G) to loop (H1) and loop (H2) on the
canopy (D). Carefully feed wire through loop (H1), quick
link (G), and loop (H2).
H2
5. Attach mounting plate (A) to junction box (not included)
with mounting screws (B) (Size: #8-32N*L0.5″). The side
of the mounting plate (A) marked with “GND” and two
H1
convex points must face out.
CONNECTING THE WIRES (Fig. 2)
6. Connect the electrical wires as shown in fig 2, making
F1
sure that all wire connectors are secured. If your junction
box has a ground wire (green or bare copper), connect the
fixture’s ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the mounting plate (A) using the
F2
green screw provided.
7. Tuck wire connectors neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
F3
8. Slide canopy (D) over mounting plate (A) and secure with
screws (E).
9. Install (4) four medium base T10 bulbs (K) up to 60 watts
each or CFL or LED equivalent (not included) in
I
accordance with the fixture specification — DO NOT
EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS
DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).
10. Place glass shade (L) over socket (J).
A B D E G
L
K J
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Fig. 2 FIXTURE WIRES Black or Smooth
Rod# W30-1-695*1(F1) W30-1-695*2(F2) W30-H-695*1(F3)
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Bare Copper (Ground)
Page: 1/2
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
LA-3512E
Fig.3
A B D
E H2
G H1
F1
a. Hardware Bag:
A. Mounting Plate *1 B. Mounting Screw*2
D. Canopy *1 E. Screw*2 G. Quick Link*1
A
B
D
E
G
H
H. Loop*2
b. Hardware Bag: F1. ROD 12″*1 F2. ROD 12″*2 F3. ROD 6″*1
F2
F3
F1
Page: 2/3 Page: 2/2
LA-3512E
