If your vacuum is not suctioning like it used to it is likely due to an obstruction in the air pathway
Follow these steps to resolve:
- Test for suction at the end of the Extension Wand
- Remove Foot from the end of the Extension Wand
- Turn On, hold hand over end of Extension Wand
- Is there suction at the end of the Extension Wand?
- Yes > Go go Brush/Foot Area
- No > Disconnect the Extension Wand from the Hand Vac
- Turn On, hold hand on end of Hand Vac (where Extension Wand connects)
- Is there suction at the end of the Hand Vac opening?
- Yes > This would indicate there is a clog in the Extension Wand
- Look through Extension Wand > Clear debris
- Yes > This would indicate there is a clog in the Extension Wand
- No > Remove Hand Vac and clear debris from openings
- Turn ON > Hold hand over Circular Suction Inlet (Where top of Dirt Tank fits)
- Is there suction at the Circular Suction Inlet?
- Yes > This would indicate the Filters need to be cleaned
- Go to Cleaning Filters
- No > please Contact Us
- Yes > This would indicate the Filters need to be cleaned
