Huanuo Hndps Under Desk Printer Stand Instruction Manual

The weight of this printer stand is 15.5 lbs.

This printer stand can hold up to 65 lbs.

This printer stand measures 19″ x 13″ x 14″.

This printer stand weighs 15.5 lbs.

This printer stand is made from ABS plastic and metal.

The printer under your desk can be hidden as a first resort. A shelf beneath the desk is one of the storage solutions available in some desk designs. These handy shelves may keep the printer at a handy location that is also out of the way, allowing you to sit at the desk in comfort.

Sure, you can change the height to 9 inches; there are numerous ways to change the height. See the numerous height possibilities mentioned in the first customer review, which is provided below. The smallest height option is 3.25 inches, and you can increase it by small increments using the included extensions, etc. to reach the desired height; the largest height option is 14″.

My experience was precisely the same. It is still dispersed from the stand on the floor. When I phoned customer support, no one picked up the phone, and they didn’t return my call when I left a message.

Sure, if you don’t use the extension pieces, you can lower the cart’s height to 11.5 inches. This was recently purchased and assembled by me. To utilize the scanner on top of my printer, I needed to lower it low enough under the desk. I experimented with various height arrangements. The height came out to exactly 11.5 inches when I used both shelves (1.25 inches each), the supports (7 inches), and the wheels (2 inches).

My assembly process appeared straightforward enough that I hardly read the directions. It was erroneous. I had to restart since I was unable to insert the drawer. So, it might be that or you might be missing a component. Go back and thoroughly review the directions. It seems contradictory to me when something appears to be supposed to go a specific way. But once I actually read the instructions, it did fit together.

We apologize; we do not sell the caps and the casters individually.

While that coughing coworker should still be avoided, you should also avoid sitting next to the printer because its toner may be harmful to your health.

If your printer fits in the stand’s size, it will. You might use this printer stand’s dimensions as a guide. It is shown in image 5. Moreover, each tier’s weight limit is 38.5 lbs.

There are various height possibilities for this specific cart. It’s one of the reasons why the descriptions of the Amazon height specs differ, such as Picture #7 (13.2″) “) vs. Technical Details vs. Specifications (14″) (13.2″). According to real measurements and the product package, the following information is accurate: The lowest height is 3.25 inches, which is achieved by using just one shelf (1.25 inches) and the wheels (2 inches) without the use of supports or extensions. The 7” posts, a 1.25 extension, or even another 1.25 can all be added “lengthening for greater height. The height is increased by 1.25 inches when the second shelf is added. The greatest height allowed is 14 inches.

With the use of a printer and keyboard display unit, a stand-alone printing solution enables the selection and printing of numerous label designs without the use of a computer.

Video

Download PDF Link; HUANUO Under Desk Printer Stand pdf