- Turn off and unplug machine
- Remove dirty water tank by pulling out and up on the side latches
- Lift up on the handle to remove
- Open rubber tab on top of dirty water tank, pour out dirty water
- Rinse tank thoroughly
- Close rubber tab
- Remove float stack from dirty water tank unscrewing the ring at the bottom of the tank
- Rinse the float stack under water to remove any debris
- Ensure that float stack can freely move up and down
- Let float stack & dirty water tank dry
- Do not put dirty water tank or float in dishwasher to clean
- Put float stack back into dirty water tank aligning the arrow on the float with the notch on the tank
- Twist ring into place to secure float
- Remove debris from red filter below dirty water tank
- Grab the top of nozzle and pull away to remove it
- Rinse nozzle and wipe debris from machine
- Use a cloth to wipe brush roll cover clean
- To remove brush roll > Go to Brush Not Turning
- Let nozzle dry
- Replace nozzle aligning the top into channel in front of red filter, use both hands to push bottom portion of nozzle into place
- Return dirty water tank to machine, secure with latches
- Wrap cord around machine and store in a protected, dry area
