Assembly:
- Remove all parts of the machine from box
- Insert Handle to the base of the machine until it clicks
- Align clean water tank with the grooves at the bottom of the handle, slide clean water tank into place
Filling Clean Water Tank:
- Remove clean water tank from machine pulling up on the handle
- Unscrew the cap
- Fill with warm tap water to the water line on clean water tank
- Do not use boiling water, do not heat water and/or tank in the microwave, do not put clean water tank in dishwasher
- If using a full size bottle of BISSELL Antibacterial Formula put the cap back onto the tank > Put the clean tank back on the machine
- Firmly insert the formula bottle into the cap on the tank and squeeze until formula reaches the easyfill formula line
- If using other BISSELL formula add to the formula line on clean water tank
- Be sure to use the proper BISSELL formulas in your machine, other formulas may harm the machine and void the warranty
- Replace cap onto clean water tank
- Put clean water tank on machine and fimly press down until it is securely seated on machine
Cleaning Your Carpet
- Plug in machine
- Choose a cleaning mode if available on your model
- Turn machine on
- Step on recline pedal below the power switch while pulling back on the handle
- Hold spray trigger for 10 seconds to prime the system with cleaning solution
- Make forward and backward passes based on your selected cleaning modes
- If cleaning modes are not available on your machine, Follow the Deep Clean directions
- Empty dirty water tank & refill clean water tank as needed
- For steps on emptying dirty water tank > Go to After Cleaning Care
