To maintain your Brush Roll and Brush Roll Chamber in between uses, follow these steps below:
- Have you emptied your Dirty Water Tank?
- No > Go to After Cleaning Care
- Yes > Remove the Brush Roll Cover pulling on the latch
- Grab the Brush Roll by its handle and pull it out
- Rinse Brush Roll under water and set aside to dry
- With a dry cloth, clean out any debris from the Brush Roll Chamber
- Remove any hair or debris from the Brush Roll Gear
- Put Brush Roll back into machine
- Line up side opposite of Brush Roll handle into machine, then put the handle back into place
- Put the Brush Roll Cover back onto the machine
- Slide into the top, then rotate down until it clicks into place
- Store Upright or Horizontally
