UR20RWF Ultra High Frequency Winder Card
Product Information
The UR20RWF winder is an ultra high frequency, readable and
writable card issuer. It is designed to read and write data for the
user area and EPC area of UHF tags. It supports UHF tags and UHF
cards, and operates at a work frequency of 902MHz-928Mhz. The
reading range is 20~40CM.
Product Usage Instructions
1. Connect the UR20RWF winder to your computer using a mini USB
cable.
2. Open the Demo software provided by our company to configure
the work parameters of the enroller.
3. In the Demo interface, you will find the following
options:
- RF configuration: Set the RF parameters of the
machine, including power and spectrum. - Output power: Adjust the power range from 10
to 33 dBm. - Frequency: Choose the desired frequency for
your application from the available options (Global Frequencies
902MHz-928Mhz). - Output Mode: Select the output mode for the
Wiegand format. The default format is WG26, but it can be set to
WG34 or Hex. - Start Byte: Set a byte offset value to
determine where the output data will start from.
4. To read and write data from the EPC area of UHF tags, use the
“Read & Write EPC Area” option.
5. To read and write user data in the EPC area, use the “Read
& Write EPC User Area” option.
6. Follow the safety precautions mentioned in the user manual.
The operating voltage of the winder is 5V, and it is recommended to
use a mini USB cable and take the voltage from the USB port of the
PC.
Contact Information
ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang
District, Shenzhen China 518129
Tel: +86 755-89602345
Fax: +86 755-89602394
Website: www.zkteco.com
Translated from Spanish to English – www.onlinedoctranslator.com
Fast guide
UR20RWF winder
1.- Product Summary
UR20RW-F are ultra high frequency, readable and writable card issuers that can read and write data for the user area and EPC area of UHF tags.
Combined with UHF contactless radio frequency circuitry and various encoding and decoding algorithms, this card issuer can read and write the tags and cards that support the global EPC standard UHF Class1 Gen 2 and ISO 18000-6C. Its USB interface adopts the advanced plug and play interface without driver kernel technology to connect computers and other equipment. The card issuer control chip is provided with a watchdog and voltage detection circuit, and has the advantage of stable reading performance.
2.- General Information
enroller Work Frequency:
902MHz-928Mhz Reading Range:
20~40CM
3.- Technical Data
Mini-USB port
Model Supported Cards Work Frequency Reading Distance
Protocol Communication Interface Support Operation
UR20RWF UHF Tags ,UHF Cards
902MHz-928Mhz Valid distance of 20 ~ 40CM (determined by the environment and labels) Global EPC UHF Class1 Gen 2, ISO 18000-6C USB analog keyboard output Compatible with US standard UHF reader
working voltage Work Current Work temperature
DC5V(±4%) 50~300mA -10°C ~ +50°C
4.- Safety Precautions
The operating voltage of the winder is 5V, it is recommended to use a mini USB cable and take the voltage from the USB port of the PC.
5.- Modification of the configuration by means of Demo
UR10RW
Software Introduction
Our company offers Demo, which is used to configure the work parameters of the enroller. The demo interface is as shown below:
The default reader settings are as follows:
Output power Frequency Communication Interface
26dBm 902MHz-928Mhz Wiegand 26
Demonstration with instructions Connect the USB port of the reader to the USB port of the computer.
– To play the demo on computer, please click “Connect”, on the right side of the middle it will display “Connected Successfully”.
– RF configuration: Set the RF parameters of the machine, including power and spectrum.
– Output power: The power range is 10 ~ 33 dBm. – Frequency: They allow its use in multiple applications and
systems. Available for Global Frequencies 902MHz-928Mhz. – Output Mode: The default Wiegand format is WG26 and can be set
to WG34 and Hex. – Start Byte: EPC tag has 12 byte data, the default first 3 or 4 byte data,
if you set a byte offset value, the output data will start from the set value. Reading and writing The module is used to read and write the EPC card number. Read & Write EPC Area: To read and write data from the EPC area. Read & Write EPC User Area: To read and write EPC user data.
ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang District, Shenzhen China 518129 Tel: +86 755-89602345 Fax: +86 755-89602394 www.zkteco.com
Free Online Translator - Preserves your document's layout (PDF, Word, Excel, PowerPoint, OpenOffice, text)
ZKTeco | Home Page 
