Dirty Water Tank, Filter, & Float Indicator Maintenance
Note: If orange dirty water tank indication light is illuminated, but the dirty water tank is not full, follow the steps below:
- Turn off machine and remove from docking station
- Remove dirty water tank by pressing down on recessed button on top of tank
- Grasp top of tank from sides and pull up to remove
- Remove filter by grasping sides and pulling up
- Hand wash filter & screen with warm water, remove debris
- Clean float sensors on the bottom of the dirty water tank lid with a damp cloth or napkin
- Remove all visible debris and let completely dry in order for the sensors to work
- Wipe gold sensors on top of dirty water tank lid below the filter with a dry tissue
- Wipe gold dirty water tank connection spot on machine with a tissue or soft cloth
- Remove strainer from tank, discard debris & rinse
- Rinse entire tank
- Filter should be completely dry before reassembling
- Once dry, insert filter making sure edges are smooth and not folded over
- Place top piece including screen, and filter back into dirty water tank
- Angle tank back into body of machine with bottom edge first – push tank in until it clicks into place
- Tank should not be loose and there should be no gaps
- If orange dirty water tank is full light continues to be illuminated after the dirty water tank and sensors have been cleaned, please Contact Us
