Lakeland Pscrubwht Powerscrub Rechargeable Cordless Cleaning Kit User Guide (+ PDF)

This appliance is for domestic, indoor use only.
POWER SCRUB is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless supervised or instructed by a person responsible for their safety.
Do not expose the electronics of your POWER SCRUB, or attempt to service the Battery. There are no user-serviceable parts inside. Refer servicing to qualified service agents only. Attempting self-service will invalidate your guarantee.
Please ensure the voltage rating for the Charging Adaptor matches your outlet voltage.
Before using, remove any items that could become entangled in the rotating head, such as clothing, loose papers, cords, cables, and any fragile objects.
Do not use to clean volatile liquids such as petrol or white spirit.
Only use the Charging Adaptor supplied, or an original replacement. Visit AirCraftVacuums.com for original replacement parts.
Do not handle the Charging Adaptor plug or power cable with wet hands.
If the appliance is not working as intended, please do not continue to operate or charge, and refer to an authorized service agent.
Disconnect from the Charger before commencing use, and before cleaning or maintaining.
Operate in room temperature environments only.
Do not submerge the whole unit in water or any other liquid.
Do not touch the rotating disc during operation.
Always apply a Brush head or Pad to the rotating disc before use.
Avoid operating continuously for over 20 minutes as this may cause overheating.
For technical assistance, please contact us via [email protected].

POWERSCRUB

Getting Started

Inside the box with your POWERSCRUB you will find:

3 Brush heads: 1 x Flat; 1 x Round; 1 x Pointed
Pad holder
Grey microfibre Pad
Extension handle
Hook attachment
Charging adaptor
Storage base/stand
Stainless steel storage rack

Assembly

Before starting, ensure your POWERSCRUB is fully charged using the original AC Charging Adaptor.

POWERSCRUB has an optional handle extension for those harder-to-reach spots, and for comfortable floor cleaning. Please insert either the hook attachment or the handle extension into the top of the POWERSCRUB as required.

To assemble the stand, insert the stainless steel storage rack into the corresponding holes on the stand – you may choose either side. You may now neatly store your POWERSCRUB, brush heads, and the handle extension (or hook attachment) together in the stand.

Using your POWERSCRUB

Select an attachment. To use one of the 3 brush heads (Round, Flat or Pointed), insert the rotating triangular shaft at the tip of the POWERSCRUB into the corresponding opening in the center of the Brush head, and twist clockwise. To remove, simply twist in an anticlockwise direction and detach.
To use the greys microfibre Pad or the sponge Pad, simply attach to the pad holder using Velcro, and attach the Pad holder to the POWERSCRUB as above. Please ensure that the Pad is placed centrally on the Pad holder.
You may choose to use your POWERSCRUB with or without the handle extension installed. To install, simply click into place. To remove, press the Handle release button, and pull to detach.
You may also choose to moisten surfaces using a spray bottle containing water or cleaning solution, before going over with your POWERSCRUB.
Adjust the hinge to your preferred angle.
Press the Start/Stop button. The LED light on the handle will illuminate green and the Brush head/Pad will start to rotate at 180rpm. Press again to switch to high-speed mode (250rpm) – the Speed Indicator light will now turn red. To turn it off, press the Start/Stop button once again. You may also hold down the button for 3 seconds when in low-speed mode to switch off.
You may submerge the rotation shaft (the section below the hinge) of your POWER SCRUB in water for short periods. Do not allow the section above the hinge to become submerged in water.

Charging

Use only the original Charging Adaptor supplied with your POWERSCRUB.
The battery charge level is indicated in real-time on the numerical LED display on the handle:

Please recharge when the battery level indicator shows a low level of power, by connecting the Charging Adaptor to a power supply and to the charging port on the base, as shown above. Please insert the rubber cover into the charging port when not being charged.
Charge time is approximately 2.5 hours. Disconnect the Charging Adaptor once fully charged (when the battery level indicator displays 100). Overcharging may damage the built-in battery. Important: Use only the original AirCraft AC Charging Adaptor supplied, or an original replacement from an authorized AirCraft retailer. Using any other type of Charging Adaptor will not charge the battery, and may damage the battery and invalidate your guarantee.

Storage and Maintenance

It is recommended that your POWERSCRUB is regularly cleaned and maintained to ensure optimal performance.
You may clean the exterior of your POWERSCRUB using a soft, dry cloth.
The microfibre Pad may be machine-washed (at 30º, without bleach or fabric softener) or hand-washed as often as required. Do not dry clean or iron. Brush heads and the sponge Pad should be rinsed with clean water after each use and may be left to dry on the storage rack.
Do not store where there is a danger of freezing. Freezing may damage internal components and may void your guarantee.
Store with at least a 60% charge to prolong the lifespan of the battery. Charge at least every 6 months to maintain the battery.
Additional or replacement POWERSCRUB accessories are available at AirCraftVacuums.com.

Technical Specifications

• Voltage:
• Power:
• Battery:
• Adaptor output voltage
• Charge Time:
• Operating Time:
• Dimensions:
• Net Weight:
• Noise level:

7.4 v
84 w
Lithium 2000mAh (14.8 Wh
DC 12 v / 1 A
2.5 hrs
40 mins
120 x 6.5 x 6.5 cm
1.08 kg
< 70 dB

Guarantee

We hope that you will love your AirCraft POWERSCRUB. We aim to provide the best possible standard of customer care.
We support this product with a 12-month guarantee from the date of purchase. The guarantee is valid only if the product has been properly maintained and is used for domestic purposes only, in line with this User Guide, and has received only manufacturer-authorized repairs, servicing, or alterations. It excludes defects arising from fair wear and tear. Self-service will invalidate your guarantee.
Please see AirCraftVacuums.com for full terms and conditions.
Under-guarantee products that meet these conditions and that function improperly will be serviced or replaced at our sole discretion, upon production of a valid proof of purchase. It is your responsibility to securely package items for their safe return to us using a trackable service. Not doing so will void your guarantee.
We may be contacted at: [email protected].
AirCraft disclaims any liability for incidental or consequential damages.
Your statutory rights are not affected.

Correct Disposal
(Waste, Electrical & Electronic Equipment)

This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from general household waste. When this product reaches its end of life, contact your supplier or take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.