Installation
Connection
To connect the lamp to the bridge, follow the instructions in the mobile app.
Factory Reset
Tum the light off for 3seconds, then power the light back on and leave it on for 5 seconds, the light should now be 100% on. Then, switch the light off and on 6 times, with each off and on the interval between 0.5-1 second. After the 6th time on it will blink twice to indicate it is the factory reset.
Disassemble
Important safety instructions
- For indoor use only.
- Do not disassemble the product; if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning agent.
- Keep these instructions for future use.
Declaration of Conformity
Hereby, lnnr Lighting BV declares that the radio equipment types RCL 11x, RCL 21x are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.innr.com/en/downloads
Frequency: 2.4 GHz (2400 – 2483.5MHz) – RF power: max.10 dBm
wwwinnr.com
Innr Lighting B.V. 2020
