810588674 4 Light All Weather Wicker Battery Operated Outdoor Chandelier
Product Information
Product Name: Penner Chandelier
Item Number: D203019501
SKU: 810588674
Production Number: 2023100621
General Best Practices for Assembly:
- Follow the assembly instructions carefully.
- Ensure all parts are included and in good condition.
- Use appropriate tools and equipment.
- Do not force or over-tighten any components.
Warnings:
- Read and understand all warnings and precautions in the user
manual before assembly. - Keep away from children and pets.
- Ensure the chandelier is securely installed to avoid accidents
or damage.
Warranty:
- The limited warranty is extended to the original
purchaser. - Covers material and manufacturer’s defects.
- Warranty period: 6 months.
- Warranty does not cover surface oxidation (rusting) caused by
scratches on protective coatings.
Maintenance:
Due to the nature of steel, surface oxidation (rusting) may
occur if protective coatings are scratched. Regular cleaning and
maintenance are recommended to prevent rusting and ensure longevity
of the chandelier.
Responsible Party – U.S. Contact Information:
Company: Broyhill, LCC
Address: P.O. Box 236, Summit Station
Telephone or Internet Contact Information: 1(866)578-6569
Product Usage Instructions
Installation Requirements:
This installation requires at least 2 people.
Step 1:
- Hook the lamp on the chain in the order of 1, 2, 3, 4.
Step 2:
- Insert 4 bulbs (part C) into the lamp (part B).
- Attach the remote control (part D) to the lamp (part B).
ASSEMBLY INSTRUCTIONS ITEM#:D203019501 SKU#:810588674
PENNER CHANDELIER
Need help? We are here for you! 1(866)578.6569 24/7 · Toll Free
Production number: 2023100621
GENERAL BEST PRACTICES FOR ASSEMBLY:
· Please read and understand this entire manual before attempting to assemble or install the product. · Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. · Do not place the product on a damp or conductive subsurface.
WARNINGS:
· The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the product. If in doubt, consult a qualified electrician.
· Do not mix old and new batteries. Do not mix alkaline, standard (Carbon – Zinc), or rechargeable (Nickel – Cadmium) batteries. If you find any noise, excessive temperature or leakage from a battery, please discard. When not using the unit for a considerable period of time, disconnect the batteries from the unit for storage. If battery power is weak during use, switch off the device and dispose of batteries.
· Do not dispose of batteries in fire, batteries may explode or leak. · This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that many cause undesired operation. · Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. · Reorient or relocate the receiving antenna. · ncrease the separation between the equipment and receiver. · Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
WARRANTY:
WHAT IS COVERED? The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes. Warranty: 6 months
MAINTENANCE:
· Place 3 AA batteries into the battery case. Batteries not included. · Maintenance/cleaning of the lights is limited to the surface exterior, using a dry cloth only. · Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
Responsible Party – U.S. Contact Information
Company: Address: Telephone or internet contact information:
Broyhill, LCC P.O. Box 236, Summit Station 1(866)578-6569
2/6
EXPLODED DRAWING A
C B
D
3/6
PARTS LIST
Label Part Number Description Qty
A P00680000501
Chain
1
B P00790018901
Lamp
1
C P00600003601
Bulb
4
D P00760011101 Remote control
1
Part Image
How many people are needed for the installation
4/6
STEP 1
A
B
1x
1x
A
Hook the lamp on the chain in the order of 1,2,3,4.
3 412
B
Assembled View:
5/6
STEP 2
C
D
4x
1x
A C
B
D
Assembled View:
6/6
