TD10027W Adella 1-Light Black Rustic Natural Rattan Plug-In Swing Arm Wall Lamp with Dimmer Switch
Wall Sconce
PACKAGE CONTENTS
PART A Fixture B Shade C Socket ring
DESCRIPTION
Instruction Manual
HARDWARE CONTENTS(shown actual size)
ABA
BBB
CBC
DBD
ABA
A B
C
QUANTITY 1 1 1
Long monting x 2 screw
Wire nut x 3
Long monting x 2 screw
Mounting plate (No actual size) x 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
Print in china
ASSEMBLY INSTRUCTIONS
1. According to the right figure
unfold the 1 lamp.
2. Attach the mounting plate (DD) to the
2
outlet box (not included) with the long
mounting screws (CC).
Hardware Used
CC Long mounting screw
x 2
DD Mounting plate
x 1
3. Strip 3/4 in. of insulation from wire ends. 3 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
DD CC
ASSEMBLY INSTRUCTIONS
4. Attach wire nuts (BB).Tape wire nuts (BB) 4 and wires together.
Hardware Used
BB Wire nut
x3
BB
5. Align the 2 screws(AA) through the holes 5 of the back plate, and fix them with screw nuts
Hardware Used
DD A
AA Long mounting screw
x 2
DD Crossbar
x 1
AA
6. Remove socket ring (C) from the socket, 6 put on the shade (B), and fix it with socket
ring(C).
A
A
C
B
AB
C
C
AB
Print in china
Digital Services, Technology and Consulting | Reply
