1231F Large Rolling Watertight Tool Case
Product Information
The product is a wheel hub with dimensions of 28.61 inches
internal and 11.10 inches at the top bosses. The product has a 1.97
inch wall and a label area of 3.5 x 2.0 inches. It also features a
pull handle with a length of 1.11 inches and four stainless steel
padlock protectors. The product has a latch with an optional metal
lock and can accommodate dimensions of up to 28.6 x 17.7 x 6.6
inches (top of handle cradle).
Product Usage Instructions
- Ensure that the product is installed securely using a 1/4 and
#10 self-tapping screws at the bottom and top bosses
respectively. - To open the product, pull the handle which extends up to 9.30
inches. - The product has four wheels with ball bearings for easy
mobility. - If desired, the product can be fitted with an optional latch
with a metal lock by specifying p/n 1231ML.
Note that the dimensions to the bottom of the panel flange
should be considered when determining the usable interior space of
the product.
1.97 WHEEL
HUB
11.10
@ top BOSSES
A
SE1231
13.73 @ bottom
BOSSES
28.61 internal
3.5″ X 2.0″ Label area
1.11 Pull handle
3
1.62
3
4.55
7.41 @ top BOSSES
8.20 @ bottom
BOSSES
21.13
17.72 internal
A
Sainless Steel Padlock protector (4X)
31.86
6.70 @ bottom
BOSSES
.20 WALL
6.63 internal
PULLED HANDLE EXTENDED
9.30
SECTION A-A 6.38
9.10
3.00 (4) Wheels w/ball bearings
ML
Optional latch with metal lock. See note 4
NOTES:
1) Max. usable inside dimensions are:
28.6″ X 17.7″ X 6.6″ (top of handle craddle)
dim. are approx.
2) Bosses @ bottom use a 1/4 and # 10 @ top
self tapping screws.
3) Dimensions to bottom of panel flange.
4) Optional latches with Metal Lock
Specify p/n 1231ML.
2/22/2022
2009 Wright Ave. La Verne CA 91750
Ph. (626) 339-6673 Fx. (626) 331-8584 www.seahorse.net
Official Seahorse Cases
