WBWL-KY05-BK 1 Light Black Wall Sconce Rattan Wrapped Wall Lamp
Product Information
The lighting fixture is rated for indoor use and can accommodate
up to one E26 Socket 60-Watt maximum light bulb or LED equivalent
bulb (not included). The fixture must not be used with bulbs
exceeding the recommended wattage to avoid the risk of fire.
Product Usage Instructions
- Before beginning the installation process, turn off the
electricity at the circuit breaker or main fuse box. - Take the wall bracket off the canopy and connect it to your
junction box using the provided screws. - Make electrical connections using the wire nuts.
- Place the canopy against the mounting surface, being careful
that no wiring is left exposed. Secure the canopy to the wall
bracket with the two previously removed screws. Install the shade
to the socket, followed by the light bulb(s), and then install the
metal pipe. - Turn on the electricity at the circuit breaker or main fuse box
and then turn on the light. - Always switch off the electricity supply and allow bulbs to
cool for 10 minutes before changing.
It is important to check for electric, gas, and plumbing lines
before drilling or consult a professional. Do not restore power to
the line until the light has been fully installed. If you have any
questions or concerns, please contact
[email protected].
Please note that these instructions are not a substitute for
professional installation. If you are not comfortable installing
the fixture yourself, please consult a professional
electrician.
ASSEMBLY INSTRUCTIONS
WARNING: .Check for electric, gas, & plumbing lines before drilling or consult a professional. .Turn off your electricity at the circuit breaker or main fuse box before installation. Do not restore power to the line until the light has been fully installed. .Do not use with bulbs exceeding the recommended wattage. .Always switch off the electricity supply and allow bulbs to cool for 10 minutes before changing.
This fixture has been rated for up to one (1) E26 Socket 60-Watt maximum light bulbs or LED equivalent bulbs (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE. The lighting fixture is meant for indoor use.
ASSEMBLY
Please follow the steps (1-5) to install the lighting fixture.
1
2
0FF
3
Ground wire/
2
black/Noir
Fil de mise a terre
L
N
white/blanc
1
5 4
ON
1 3 2
3
1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning.
2. Take the wall bracket off the canopy, connect your wall bracket to your junction box (not included) using the provided screws. 3. Make electrical connections using the wire nuts. 4. Being caref ul that no wiring is lef t exposed, place the canopy against the mounting surf ace. Secure the canopy
to the wall bracket with the 2 previously removed screws,install the shade to the socket, install the light bulbs ,then install the metal pipe . 5. Turn on the light.
Thanks for your purchase! Should you have any questions or concerns, please do not hesitate to contact us by mail address
[email protected]
