Wingbo Wbwl-rm18-bs-203 1-light Bathroom Light Fixtures Wall Sconces User Manual

WBWL-RM18-BS-203 1-Light Bathroom Light Fixtures Wall Sconces

Product Information:

The WBWL-RM18-BS-203 and WBWL-RM19-NI-204 are semi-flush mount
lighting fixtures designed for indoor use. They are rated for up to
two (2) E12 Socket 60-Watt maximum light bulbs or LED equivalent
bulbs (not included). Exceeding the recommended lamp wattage may
pose a risk of fire.

Product Usage Instructions:

1. Remove wall bracket (B) from canopy (D).
2. Attach the wall bracket (B) to junction box (not included) with
   screws (C) supplied.
3. Make electrical connections using wire nuts (A).
4. Attach the canopy (D) to the wall bracket (B) and screw it by
   canopy nuts (D).
5. Assemble the beads(F) frame to the shade.
6. Connect the shade(G)and ring(H).
7. Install the light bulbs (not included).

Please read the installation instructions carefully and follow
each step in order to ensure proper installation and safe usage of
the lighting fixture. If you have any questions or concerns, please
consult a professional electrician.

SEMI-FLUSH MOUNT
WBWL-RM18-BS-203 WBWL-RM19-NI-204
WARNING:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. * Check for electric, gas, & plumbing lines before drilling or consult a professional. * Turn off your electricity at the circuit breaker or main fuse box before installation. * Do not restore power to the line until fully installed. * Do not exceed the recommended wattage. * Always allow bulbs to cool for 10 minutes before changing.
This fixture has been rated for up to two (2) E12 Socket 60 -Watt maximum light bulbs or LED equivalent bulbs (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE. The lighting fixture is meant for indoor use.
Pls read the installation instructions carefully and follow the steps: 1. Remove wall bracket (B) from canopy (D). Then
attach the wall bracket (B) to junction box (not included) with screws (C) supplied. 2. Make electrical connections using wire nuts (A). 3. Attach the canopy (D) to the wall bracket (B) and screw it by canopy nuts (D). 4. Assemble the beads(F) frame to the shade
5. Connect the shade(G)and ring(H).
6. Install the light bulbs (not included).