WBWL-RM26-WH 7.5 Inch 1 Light Gold Wood Beaded Wall Sconces
Product Information
The Wall Lamp is a lighting fixture designed to be mounted on a
wall. It is suitable for indoor use and requires electrical
connections to operate. The lamp is compatible with E12 Socket
light bulbs with a maximum wattage of 40 Watts (light bulb not
included).
Warning: Please read and follow the assembly
instructions carefully to ensure safe installation and usage of the
Wall Lamp.
Product Usage Instructions
- Ensure the power supply is turned off before starting the
installation process. - Locate an appropriate outlet box on the wall where you wish to
mount the lamp. - Using the provided mounting screws, install the mounting
bracket securely onto the outlet box. - Make electrical connections by connecting the wires from the
lamp to the corresponding wires in the outlet box. Use wire nuts to
secure the connections, ensuring proper insulation. - Attach the canopy onto the mounting bracket using screws and
canopy nuts, ensuring it is securely fastened. - Hang the strands and pendant on the lamp as desired. Ensure
they are properly aligned and do not obstruct the light bulb
area. - Insert a compatible E12 Socket light bulb into the lamp. Ensure
that the wattage of the light bulb does not exceed 40 Watts. - Before turning on the power, double-check all connections and
make sure they are secure. - Turn on the power supply and test the functionality of the Wall
Lamp.
Note: To maintain safety and prevent fire
hazards, never exceed the recommended lamp wattage. If the Wall
Lamp is not functioning properly, consult a qualified electrician
or contact our customer support for assistance.
WALL LAMP
WARNING
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. * Check for electric, gas, & plumbing lines before drilling or consult a professional. * Turn off your electricity at the circuit breaker or main fuse box before installation. * Do not restore power to the line until fully installed. * Do not exceed the recommended wattage. * Always allow bulbs to cool for 10 minutes before changing.
ASSEMBLY
a. Install mounting bracket on outlet box using mounting screws. b. Make electrical connections using wire nuts. c. Secure the canopy on the mounting bracket with screws and canopy nuts. d. Hang the strands and pendant on the lamp. e. Install light bulb (not included). This fixture has been rated for up to one E12 Socket 40-Watt maximum light bulb (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE.
