APWSR01 Heavy-Duty Wall Mounted Storage Rack
Product Information:
- Product Name: Heavy-Duty Wall Mounted Storage Rack
- Model Number: APWSR01
- Overall Size (W x D x H): 1218 x 600 x 650mm
- Capacity: 100kg
- Features: Sturdy steel construction, supplied with hardware
pack - Intended Use: Ideal for workshops, garages, and warehouses for
storing a large variety of items
Product Usage Instructions:
- SAFETY:
- Ensure Health & Safety and local authority regulations are
adhered to when assembling and using this rack. - Locate the rack in a suitable area where it will not be an
obstruction. - Keep the general area clean, uncluttered, and ensure there is
adequate lighting. - Mount the rack on a flat and solid wall such as breeze block
that is strong enough to hold the fully laden rack. - The rack should be firmly secured to the wall in a suitable
location. - Please ensure suitable fixings are used for the type of wall
you intend to mount this shelf. - Do not attempt to wall mount the rack on your own. Obtain
assistance or use manual handling equipment. - Wall mount the rack at a height that minimizes the risk of
injury when used. - Keep children and unauthorized persons away from the storage
area. - Do not use the rack for any purpose other than that for which
it is designed. - Do not site the rack outdoors.
- Do not get the rack wet or use in damp or wet locations or
areas where there is condensation. - Do not clean the rack with any solvents or abrasives which may
damage the coated surface. - Do not overload the rack.
- Ensure that the rack is properly and firmly assembled and
installed before loading it.
MOUNT BRACKETS ONTO THE WALL
- Step 1A: Mark out and drill holes in the wall for the anchors.
Pay attention to the distance between the holes. - Step 1B: Use the 4pcs of self-tapping screws and 4pcs of
washers to fix the left and right side brackets onto the wall.
ASSEMBLE THE FRAME
- Step 2A: Fix the 4 frame connectors to the two long beams with
M5 screws. - Step 2B: Fix the two long beams to the two brackets with M5
screws. - Step 3: Slot the two cross beams into the two long beams. Make
sure they are properly located. - Place wire shelf onto the frame.
The product is now ready for use.
No specific maintenance instructions provided. Please refer to
general maintenance guidelines for similar products.
HEAVY-DUTY WALL MOUNTED STORAGE RACK MODEL NO: APWSR01
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this rack.
9
Locate in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Mount on a flat and solid wall such as breeze block that is strong enough to hold fully laden rack.
9
The rack should be firmly secured to the wall in a suitable location.
9
Although a generic fixing kit has been provided please ensure suitable fixings are used for the type of wall you intend to mount this
shelf.
8
DO NOT attempt to wall mount the rack on your own. Obtain assistance or use manual handling equipment.
9
Wall mount the rack at such a height that minimises the risk of injury when used.
9
Keep children and unauthorised persons away from the storage area.
8
DO NOT use the rack for any purpose other than that for which it is designed.
8
DO NOT site the rack out of doors.
8
DO NOT get the rack wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the rack with any solvents or abrasives which may damage the coated surface.
8
DO NOT overload the rack.
9
Ensure that the rack is properly and firmly assembled and installed before loading it.
2. INTRODUCTION
Heavy-duty wall mounted storage rack ideal for workshops, garages and warehouses. Features sturdy steel construction and supplied with hardware pack. Suitable for storing a large variety of items with weight capacity of 100kg. Overall size: 1218 x 600 x 650mm.
3. SPECIFICATION
Model No.: …………………………………………………… APWSR01 Capacity:……………………………………………………………. 100kg Overall Size (W x D x H): …………………. 1218 x 600 x 650mm
4. CONTENTS
© Jack Sealey Limited
Original Language Version
APWSR01 Issue 1 15/11/22
5. ASSEMBLY
MOUNT BRACKETS ONTO THE WALL Step 1A
Step 1B
Mark out and drill holes in the wall for the anchors. Pay attention to the distance between the holes.
Use the 4pcs of self tapping screws and 4pcs of washers to fix the left and right side brackets onto the wall.
ASSEMBLE THE FRAME
Step 2A Fix the 4 frame connectors to the two long beams with M5 screws.
Step 2B
Fix the two long beams to the two brackets with M5 screws.
Step 3
Slot the two cross beams into the two long beams. Make sure they are properly located.
Place wire shelf onto the frame.
© Jack Sealey Limited
Original Language Version
Ready for use. APWSR01 Issue 1 15/11/22
6. MAINTENANCE
6.1.
Regularly check fixings and mountings are firmly fitted and that the rigidity and security of the rack is not compromised.
6.2.
Wipe clean with damp cloth.
8
DO NOT use chemical or abrasive cleaners as this may result in damage to the surface.
ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
APWSR01 Issue 1 15/11/22
Sealey - Leading Professional Tool & Workshop Equipment Supplier
