DYBERG LARSEN 2001101C Wall Lamp
Material: Metal, plastic
Max: 40W E27
IMPORTANT
- This lamp must be installed by an authorized electrician.
- Warning: Always remember to turn off the voltage before working on the electrical installation.
- The lamp might get warm under use.
- To avoid injury on the lamp, please don’t use alkalic detergent. Use a soft cloth and gentle detergent. Always turn the lamp off when cleaning it.
- Omission of cleaning the lamp can have a negative effect on the life time. And possible can lead to a dangerous situation.
Changing the bulb
- Turn off the power at the head fuse.
- Disassemble the lower part of the lamp (please see drawing).
- Gently pull the bulb out of the socket.
- Change the bulb (Please only use the recommended type).
- Assemble the lower part again.
- Turn on the power.
230V~50Hz
Contains: Complete lamp (excl. bulb)
IP44 only for outdoor use
 |  |  |
| Electrical and electronic equipment (EEE) contains materials, components and substances that can be hazardous and harmful to human health and the environment when waste of electrical and electronic equipment ( WEEE ) is not disposed of properly. Products marked with ” the crossed-out rubbish bin ” shown below are electrical and electronic equipment. The crossed-out rubbish bin symbolizes that the waste of electrical and electronic equipment may not be disposed of with unsorted household waste but must be collected separately. | ||
Dyberg larsen the official website - Dyberg Larsen
