Varimixer V5a Teddy Commercial Planetary Stand Mixer Instruction Manual (+ PDF)

This warranty is given only to the first purchaser from a
retail dealer.
No warranty is given to subsequent transferees.
This warranty does not cover product failures caused by:
failure to maintain, neglect, abuse, damage due to excess water,
fire, normal wear, improper set up and use. Periodic maintenance is
not covered.
Excluded items from warranty coverage include acts of God,
fire, water damage, vandalism, accident, theft; freight damage;
improper installation or alteration of equipment; use of generic or
aftermarket parts; repairs made by anyone other than a VARIMIXER
designated servicer; lubrication; expendable wear parts (bowl, flat
beater, wire whip, spiral dough hook, pastry knife); cleaning of
equipment; misuse or abuse.
Warranty registration must be completed within 30 days from the
date of installation. Register online at varimixerusa.com/support/warranty-registration-form.

Product Usage Instructions

Safety

The V5A TEDDY Food Mixer is a technical tool intended for
working purposes. The operator’s workplace should have a constant
noise level lower than 70 dB (A).

The machine must be monitored while in operation. It is designed
for the manufacture of products that do not cause reactions or emit
harmful substances during processing. Do not put your fingers in
the bowl while the mixer is running to avoid injuries.

Installation

Before using the mixer, ensure that all parts are delivered. The
following equipment is included:

Cable
Hook
Bowl
Beater
Whip
Lid for the bowl
Ingredient chute

The mixer should be placed on a stable and horizontal table.

Power Connection

Use the enclosed cable for connection.

The mixer must be properly grounded.

A fuse is built into the cable plug.

Accessories

The mixer comes with the following standard accessories:

Splash guard

Power Characteristics

Supply Voltage: [Insert voltage]

Output Power: [Insert power]

Frequency: [Insert frequency]

Please refer to the user manual for detailed operating
instructions and spare parts information.

View Fullscreen

V5A TEDDY

TMTEDDY is a registered trademark belonging to Varimixer A/S.
Operating Instructions And Spareparts
Valid from machine number:
5900000

Varimixer USA 2215 East River Road Moraine, Ohio 45439

P: (800) 222-1138 varimixerusa.com

DRN: 20005-2136 2022 01 17

Limited Mixer Warranty – 5 qt

VARIMIXER warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. Wear parts, such as belts, are excluded. Hub attachments, such as shredders, slicers and grinders have a 1 year warranty that only covers parts. Warranty begins on date of factory shipment to an end user, or up to 6 months after factory shipment to a dealer or distributor. Payment by VARIMIXER for service under this warranty requires that service be authorized in advance. Contact VARIMIXER Technical Support to arrange for service.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. VARIMIXER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

VARIMIXER’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING AND REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an Authorized Designated VARIMIXER Service Location during normal working hours. IN NO EVENT SHALL VARIMIXER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY, PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY, STRICT LIABILITY, OR OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent transferees.

This warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess water, fire, normal wear, improper set up and use. Periodic maintenance is not covered.

Example of items not covered under warranty, but not limited to just these items:

Acts of God, fire, water damage, vandalism, accident, theft.

Freight damage.

Improper installation or alteration of equipment.

Use of generic or after market parts.

Repairs made by anyone other than a VARIMIXER designated servicer.

Lubrication.

Expendable wear parts. (This includes the bowl, flat beater, wire whip, spiral dough hook,

and the pastry knife.)

Cleaning of equipment.

Misuse or abuse.

This warranty is not in force until such time as a properly completed, digitally signed Installation/Warranty Registration has been received by VARIMIXER within 30 days from the date of installation. Register online at www.varimixerusa.com/support/warranty-registration-form.

THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. VARIMIXER NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.

WARRANTY REGISTRATION GO TO WWW.VARIMIXERUSA.COM TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION.
WWW.VARIMIXERUSA.COM/SUPPORT/WARRANTY-REGISTRATION-FORM

1
OPERATING INSTRUCTIONS TEDDYTM V5A Food Mixer
Contents:
Safety: ……………………………………………………………………………………………………………………………………. 1 Installation of new mixer:…………………………………………………………………………………………………………. 1 Connection to power: ……………………………………………………………………………………………………………….. 2 Introduction to the mixer: ………………………………………………………………………………………………………… 2 Recommended working speeds: …………………………………………………………………………………………………. 2 Operation of the mixer: …………………………………………………………………………………………………………….. 3 Maximum capacity of the mixer: ………………………………………………………………………………………………… 3 Overload:…………………………………………………………………………………………………………………………………… 3 Cleaning and hygiene: ……………………………………………………………………………………………………………….. 3 Maintenance: ……………………………………………………………………………………………………………………………… 4 List of errors and possible solutions:…………………………………………………………………………………….. 4 Accessories……………………………………………………………………………………………………………………………….. 4 Spare Parts………………………………………………………………………………………………………………………………… 5

Safety:
The machine is a technical tool, and is intended solely for working purposes. The constant noise level of the workplace of the operator is lower then 70 dB (A).
· The mixer will only start when the upper part is lowered.
· The upper part can only be tilted up when the mixer is stopped.
· Protection from excess current, excess voltage and too low voltage.
· The mixer is provided with fixed bowl screen.
· The mixer is equipped with a safety-timeout that turns off the mixer after 45 minutes continuous operation.
The machine must be monitored while it is in operation. The mixer is designed for manufacture of products which do not during processing cause reactions or emit substances which may be detrimental to the user. Putting your fingers in the bowl while the mixer is running may cause injuries.

Installation of new mixer:

The following equipment is included:

Cable

Hook

Bowl

Beater

Whip

Lid for the bowl

Ingredient chute

Before taking the mixer into use, check that all parts are delivered.

Dimensions and weight: TEDDY inclusive equipment: · Net weight with equipment: · Outside dimensions of mixer:

44 Lbs. 18¼ ” x 9½ ” x 15¾ ”

The mixer is listed by:

4002624

Location: The mixer is to be placed on a stable and horizontal table.

Connection to power:

2
ACCESSORIES:
As standard the mixer comes with the following accessories:

The enclosed cable must be used.
The mixer must be connected to ground!
· Only single phase power supply with ground must be used for the mixer. Use the enclosed cable.

· Bowl in stainless steel. · Snap-in splash guard. · Ingredient chute. · Dough hook in stainless steel for kneading of dough. · Beater in stainless steel for mixing.
· Whip in stainless steel for whipping.

· A plug with 2 pins + ground must be used.

· Check that the voltage of the power supply corresponds the voltage printed on the rating plate placed in the bottom of the mixer and stated on the packing.

· The mixer must be protected by a differential circuit breaker and a fuse of max. 10 A.
A fuse is built into the cable plug.

Splash guard

The power characteristics of the mixer:

Supply Output Frequency Voltage

voltage (V) (W)

(Hz)

(A)

115

300

50/60

3.4

Motor Power (hp) 0.4

Hook

Beater

Introduction to the mixer:
TEDDY is a small professional mixer for kneading, mixing and whipping in all environments where professional equipment is required.
Any operation of the mixer is made by means of the rotary knobs on the sides of the mixer. The two knobs can be used simultaneously or individually and are used both for speed regulation and as opening/closing function.

Whip

Ingredient chute

Bowl

Fig. 1 The construction of the mixer

B Housing of the planetary gear

C Bowl screen in stainless steel

D Bayonet shaft

E Lid

F Upper part

G Ingredient chute

H Rotary knobs (two pcs.)

Base

J Bowl in stainless steel, contents 5 quarts

K Locking arm

Recommended working speeds:

Position 1-2: Low speed

Kneading

Position 1-3: Medium speed Mixing

Position 1-5: High speed

Whipping

Fig. 2 Recommended working speeds

Operation of the mixer:
The bowl must be mounted when the mixer is started!
The machine must be monitored while it is in operation A. Turn the rotary knobs to the locking symbol (fig. 3A).

3
Maximum capacity of the mixer:
The working capacity of the mixer depends of: · The tool used. · Sort and quantity of the raw materials. · The optimum speed for a good result.
Too big quantities will always reduce the quality of the product and the life of the mixer. Overloading can also result in sudden stops.

A: Locking symbol B: Neutral position C: Speeds Fig.3 The three positions of the rotary knobs. B. Tilt backwards the upper part of the mixer. C. Place a tool in the bayonet shaft and turn it counter-clockwise
to lock it in position (fig. 4).
Fig. 4 Mounting of tool in the bayonet shaft. D. Place the bowl in the mixer (1), turn it to be fixed in the lock-
ing bolts (2) and turn the handle (3) (fig. 5).
Close the machine by pressing down on the top of the head section. You will hear a click when the machine has closed properly
Locking bolts
3
Fig. 5 Place the bowl in the machine and twist it onto the locking bolts and turn the locking arm anticlockwise. E. Fill the ingredients in the bowl. F. Tilt the upper part of the mixer, including tool, down. G. Start the mixer by turning the rotary knobs away from the
locking symbol and past 1. To avoid splashing and dust from flour, it is recommended to increase the speed gradually until the required speed is obtained (fig. 3C), (see fig. 2 for recommended working speeds). H. Stop the mixer by turning the rotary knobs back to neutral position (fig. 3B). I. The upper part of the mixer can only be tilted backwards when the rotary knobs is turned to the locking symbol (fig. 3A).

Product
Bread dough, 60% Mashed potatoes Whipped cream Layer cake Cake donuts

Raw material
Lbs Lbs Qt Lbs Lbs

Approx. max. quantity 5 4 1 6 6

Overloading:
If the mixer is moving e.g. kneading dough, this is not due to errors or overloading.
In case of overloading the electronic variator will reduce the current to the motor and stop it.

In case of stop due to overloading, turn the rotary button back to neutral position, and the mixer can be started again.
If the motor stops after long time of operation, and cannot be started immediately after, the temperature sensor of the motor has switched off the current, and the mixer needs to cool down before it can be re-started. This protects the motor from overheating.
The mixer contains two thermal cut-outs, which automatically reconnect in case of previous disconnection by the temperature sensor.
Cleaning and hygiene:
After use:
· Remove bowl and tools.
· Wash the bowl and the tools in hot water and detergent / degreaser / disinfectant. Rinse with pure water and dry.

Do not spray water on the mixer

Tools and bowl can be cleaned in dishwasher.
· Wipe the housing of the planetary gear, the bayonet shaft and the bowl screen. Use a damp sponge and a detergent / disinfectant. Rinse the parts with sponge and pure water.
· Check that the various parts have been cleaned thoroughly. · Do not use abrasive detergents, which could scratch the
surface. · Use detergents suited for use on aluminium and plastic
(polycarbonate).

Maintenance:

ACCESSORIES

The mixer requires no maintenance (motor and bearings for the mechanical parts are greased for life).

Stainless steel dough hook

Stainless steel wire whip

Safety device: Check the function of the safety device regularly:

Stainless steel flat beater

· The motor must stop when the rotary knobs is in neutral Plastic bowl lid

position (see fig. 3B).

Stainless steel bowl

If the safety device does not function, do not use the mixer. Contact your dealer.

Ingredient chute Splash guard

List of errors and possible solutions:

If the problem cannot be solved, contact your dealer.
The mixer does not start: Check that … · The upper part of the mixer is in its down position. · The mixer is plugged in and connected to power. · The electrical power supply is correct. · The fuse in the cable plug (fig.6, 1) has not been burned.
If the fuse is defective, it can be replaced by the extra fuse (fig.6, 2) that is also available in the cable plug.

VHOOK-05 VWHIP-05 VBEAT-05SS VBLID-05 VBOWL-05 VCHUTE-05 VRING-05

2
Fig. 6 Fuses in the cable plug.
The mixer stops during work: · The mixer is overloaded due to too high speed or too
heavy loading. See the paragraph “Overloading”.
In case of power failure set the rotary button back to neutral position, and the mixer can be started again.
The tool is stuck in the bayonet shaft: This is normally due to insufficient cleaning or damaged hole in the tool: · When the tool is stuck, do not force it free. Apply a little
oil and let this work a couple of minutes. · Turn the tool backwards and forwards until it can be removed.
Abnormal noise: Metallic noise … · The tool is distorted and hits the bowl. · The bowl has been damaged or is not in its proper position.

Spare parts

No. Description

Part No.

1………Control Button, Left and Right ………………………………………………………………………….. AR005-178-TZ001 # 2………Base ……………………………………………………………………………………………………………… AR005-022-TZ0xx
2.1……Fuse 5 A, slow, 120V……………………………………………………………………………………….. AR005-418-00001 3………Cover Plate…………………………………………………………………………………………………….. AR005-347-TZ001 4………Cable with Rheostat and Microswitches……………………………………………………………… AR005-193-TZ002 5………Tilt Bearing, Left and Right ……………………………………………………………………………….. AR005-337-TZ001 # 6………Lid…………………………………………………………………………………………………………………. AR005-024-TZ0xx 7………Intermediate shaft……………………………………………………………………………………………. AR005-325-TZ001 # 8………Upper Part ……………………………………………………………………………………………………… AR005-023-TZ0xx 9………Lock Pin…………………………………………………………………………………………………………. AR005-332-TZ001 10…….Planetary Head………………………………………………………………………………………………..AR005-002-TS001 11…….Control Board ………………………………………………………………………………………………….AR005-378-TS003 12…….Cable ……………………………………………………………………………………………………………..AR005-193-TS004 13…….Motor …………………………………………………………………………………………………………….. AR005-339-TZ001 13.1….Poly-V Belt………………………………………………………………………………………………………AR005-090-TD001 13.2….Poly Belt …………………………………………………………………………………………………………AR005-090-TD001 14…….Release Housing ……………………………………………………………………………………………..AR005-372-TS001 15…….Weight Compensator……………………………………………………………………………………….. AR005-352-TZ001 17…….Machine Feet………………………………………………………………………………………………….. AR005-213-TZ001 18…….Fixing of Bowl …………………………………………………………………………………………………. AR005-340-TZ001 19…….Bowl Lock ……………………………………………………………………………………………………….AR005-336-TS010 20…….Power Cable……………………………………………………………………………………………………AR005-194-TD006

# Please state the color when ordering

6
12
13.2 13.1 13
15 14 5
9
4.1 4 1
2.2 2.1 2
20
11

7 8
16
10 10.1 19
18 3

Varimixer USA 2215 East River Road Moraine, Ohio 45439 P: (800) 222-1138 varimixerusa.com