VIVO Black 30″ Cable Management Desk Organizer Instruction Manual
SKU: DESK-SKIRT-30
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-skirt-30
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
- A (x1) Panel
- B (x2) Side Bar
- C (x2) ST4.8×19 Screw
- D (x2) Mounting Clip
- E (x4) Upper/Lower Bar
- F (x6) Joining Tube
TOOLS NEEDED
- Phillips Screwdriver
- Drill
- Pencil
ASSEMBLY STEPS
- STEP 1
Assemble the steel bar frame using the side bars (B), upper/lower bars (E) and joining tubes (F).
- STEP 2
Open the flap and straps of the panel (A) and insert the frame, making sure the frame is fully inserted and the material is tightly stretched around it.
- STEP 3
Fasten the straps to secure the frame.
- STEP 4
Place the plastic mounting clips (D) in the center of each exposed portion of the steel bars.
NOTE: Make sure the wire management flap on the panel (A) is facing the inside of the desktop. - STEP 5
Center the assembled panel under the desktop. - STEP 6
Mark the locations of the mounting clips (D) using a pencil. Drill pilot holes using a 1/8” (3mm) bit and mount the assembled panel to the underside of the desk using the ST4.8×19 screws (C) as shown.
NOTE: Desktop must be at least 1” thick to prevent screws from poking out through the top and damaging the surface. - STEP 7
Route and organize the cables and secure them using the flap on the panel (A).
CONTACT
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
