CHA 8906 Large Fluted Spire Table Lamp
Product Information:
Product Name: Large Fluted Spire Table Lamp
Item Number: CHA 8906
Product Type: Light Fixture
Product Usage Instructions:
- Before starting the installation, ensure that you are familiar
with the construction and operation of the lamp, as well as the
associated hazards. Also, make sure to comply with all applicable
local installation codes. - Carefully unpack all the parts from the box.
- Attach the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the
finial (A). - Insert a suitable bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning correctly.
- Once installation and testing are complete, the lamp is ready
for use.
Care Instructions:
To clean the lamp, use only a soft dry cloth or a feather
duster. Avoid using abrasive or chemical agents, as they may damage
the lamp’s surface.
Please note that this product is listed for use in the United
States (US).
ASSEMBLY INSTRUCTIONS
Large Fluted Spire Table Lamp
Item # CHA 8906
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
