DH DALI AC Switch
Product Information:
The DALI AC Switch ModelNo.:DH is a product that provides two
DALI addresses and two-channel AC output. It comes with a numeric
display and LVD features. The product is designed to cater for
unwanted dimming lighting systems and can be used to switch two LED
lamps, traditional incandescent and halogen lights. The switching
thresholds of the relay can be set on the DALI bus, and it also has
a zero-cross switching function. The product is compliant with DALI
products from other international incorporation and follows the
DALI standard protocol IEC 62386-102, IEC 62386-208.
Technical Parameters:
- Input voltage: AC100-240V
- Output voltage: AC100-240V
- Output current: 2CH, 5A Max
- Output power: 2*(500-1200)W
- Operation temperature: Ta: -30 OC ~ +55 OC
- Case temperature (Max.): T c: +70OC
- IP rating: IP20
- Warranty: 5 years
- Weight: 123g
- Gross weight: 140g
Mechanical Structures and Installations:
The product has an AC N input and output, AC L input, and two AC
L outputs. It also has two groups of DALI signal inputs, a digital
display, and a setting key. The wiring diagram should be carefully
followed.
Product Usage Instructions:
Relay switch setting: To toggle Relay Switch on
and off, long-press two buttons at the same time for 2s. The
default setting is on. To turn on, short press the setting 1 key,
and to turn off, short press the setting 2 key. Long press any of
the two buttons for 2s or timeout 10s to quit Relay switch
setting.
Set DALI Address via buttons: To set the start
DALI address, long-press any of the two buttons for 2s, and the
digital display starts flashing. To set the tens position, short
press the first button, and to set the units position, press the
second button. The address can be set from 00~62-FF. If no DALI
address is assigned for the dimmer, the digital display shows FF.
Address assignments are sequential. If the set address value is 01,
the CH1 address value is 01, and the CH2 address value is 02.
Note: If output is connected with capacitive or
inductive load, the maximum output current is only up to 5A. If
output is connected with resistive load, the maximum output current
may be up to 8A. Please ensure all wire connections and polarities
are correct and secure before applying power; otherwise, this
controller will be damaged.
DALI AC Switch ModelNo.:DH
2 DALI address/2 Channel AC output/Numeric display
LVD
Features
DALI control power on/off to cater for unwanted dimming lighting system, two DALI address, two channel output, AC input and AC output.
In accordance with DALI standard protocol IEC 62386-102, IEC 62386-208 and in compliance with DALI products from other international incorporation.
DALI address can be manually assigned and shown in digital display or automatically assigned by DALI master. The switching thresholds of the relay can be set on the DALI bus Zero cross switching function, 2 independently output channels AC switch. To switch two LED lamps, traditional incandescent and halogen lights.
Technical Parameters
Input and Output Input voltage Output voltage Output current Output power
AC100-240V AC100-240V 2CH, 5A Max 2*(500-1200)W
Environment Operation temperature Case temperature (Max.) IP rating
Ta: -30 OC ~ +55 OC T c: +70OC IP20
Warranty Warranty
Weight weight Gross weight
5 years
123g 140g
User Manual Ver 1.0.0
Mechanical Structures and Installations
AC N
AC N AC N
AC L Input AC L Output 1 AC L Output 2
N
N
DH DALI AC Switch
N
Uin=100-240VAC
Iin=10.5A
Wire Preparation 0.5-2.0mm²
4-5mm
AC OUTPUT 2 AC OUTPUT 1
AC INPUT
Uout=100-240VAC
Iout=2*5A
L
Pout=2*(500-1200W)
tc: 70
L1 Temp Range: -30~+55
L2
Da1 Da2
Da1 0-6 0-9
Da2
SIGNAL INPUT
SIGNAL INPUT
187.00 mm
Setting key
Digital display
DH DALI AC Switch Two groups of DALI signal input DALI bus no need distinguish plus-minus polarity
46.00 mm
22.00 mm
Wiring Diagram
Caution:
Please carefully ensure all wire connections and polarities are correct and securebefore applying powe,r otherwise this controller will be damaged.
LED light
N AC 100-240V
L
N
N
DH DALI AC Switch
N
Uin=100-240VAC
Iin=10.5A
Wire Preparation 0.5-2.0mm²
4-5mm
AC OUTPUT 2 AC OUTPUT 1
AC INPUT
Uout=100-240VAC
Iout=2*5A
L
Pout=2*(500-1200W)
tc: 70
L1 Temp Range: -30~+55
L2
Da1 Da2
Da1 0-6 0-9
Da2
SIGNAL INPUT
SIGNAL INPUT
DALI Master
LED light
N AC 100-240V
L
N
N
DH DALI AC Switch
N
Uin=100-240VAC
Iin=10.5A
Wire Preparation 0.5-2.0mm²
4-5mm
AC OUTPUT 2 AC OUTPUT 1
AC INPUT
Uout=100-240VAC
Iout=2*5A
L
Pout=2*(500-1200W)
tc: 70
L1 Temp Range: -30~+55
L2
Da1 Da2
Da1 0-6 0-9
Da2
SIGNAL INPUT
SIGNAL INPUT
Note: If output connect with capacitive or inductive load, the maximum output current only up to 5A. If output connect with resistive load, the maximum output current may up to 8A.
Page 1
Operation Relay switch setting
Long press two buttons at the same time for 2s, Toggle Relay Switch: On(“On”) and Off(“OF”). Enter the default setting to on(“On”), then short press the setting 1 key to turn on(“On”), short press the setting 2 key to turn off(“OF”). Long press any of the two buttons for 2s or timeout 10s, quit Relay switch setting.
Set DALI Address via buttons
Long press any of the two buttons for 2s, prepare for set the start DALI address, digital display start ashes. Short press rst button to set “tens” position and second button to set “units” position. The address can be set from 00~62-FF. no DALI address is assigned for the dimmer, digital display shows “FF”. Address assignments are sequential. If the set address value is 01, the CH1 address value is 01, and the CH2 address value is 02,
The display shows the CH1 address value. Long press any of the two buttons for 2s or timeout 10s, quit start DALI address setting, digital display stop ashes.
DALI address assigned by DALI masters
DALI address can also be assigned by DALI Master controller automatically. Please refer to user manuals of compatible DALI Masters for speci c operations. The digital display will show “AU” When the DALI master is assigning address. After address is assigned, the digital display will show the start DALI address”xx”, xx is from 00 to 63.
User Manual Ver 1.0.0
DH DALI AC Switch
Page 2
