Specifications & Manufacturer declarations
Team Connect Bar
Model: TC Bar S
TC Bar M
SPECIFICATIONS
Geam Connect Bar S
General
| Dimensions (L x W x H) | 450 x 71 x 76 mm |
| Weight | 1.5 kg |
| Operating temperature range | 0 °C to 40 °C 32 °F to 104 °F |
| Storage temperature range | -25 °C to 70 °C -13 °F to 158 °C |
| Relative humidity operation | 0 to 75 %, non-condensing |
| Relative humidity storage | 0 to 95 %, non-condensing |
| DC IN | 15 V  max. 2 A |
| Max. power consumption | 30 W |
| Voltage range PoE (PD | 42.5 – 57.0 V (IEEE 802.3at Type 2, PoE+) |
Power State Information
| Standby Mode (all ports deactivated) | ≤ 0.50 W (Entered after 2 hours with no activity on any network port) |
| Networked Standby (all ports activated) | ≤ 2.00 W (Entered after 18 minutes of inactivity) |
| Networked Standby (all ports activated) | ≤ 2.00 W |
Network port deactivation/activation procedures:
| Wi-Fi | Deactivate by pressing the Reset switch on TC Bar for 5 sec, or by disabling the Wi-Fi switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the Wi-Fi switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| Blue- tooth® | Deactivate by disabling the Bluetooth switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the Bluetooth switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| HDMI® | Deactivate by disabling the HDMI switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the HDMI switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| Ethernet | Deactivate by removing the Ethernet cable. Activate by inserting the Ethernet cable. |
| USB | Deactivate by removing the USB cable. Activate by inserting the USB cable. |
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Loudspeaker
| Number of speakers Type Diameter | 2 with passive radiator fullrange 50 mm (2″) |
| Amplifier | Class-D |
| Max. SPL (output) | 80 dB SPL |
| Total Audio Power (RMS/PEAK) | 10 W / 20 W |
Microphones
| Transducer principle | MEMS |
| Pick-up pattern | Adaptive Beamforming Array |
Camera
| Sensor | 8 MP |
| Technology | ePTZ |
| Diagonal field of view | 120° |
| Horizontal field of view | 115° |
Interfaces
| HDMI out | HDMI 2.0 |
| USB-C | USB 3.1 (Gen 1) |
| USB-A power output | USB 3.1 (Gen1) 5 V max. 900 mA |
| Ethernet | 1 x 1000/100/10 Mbit/s (RJ45) Note: Only use network cables with the standard CAT5e (F/STP) or better. |
| DC IN dimension | 5.5 x 2.1 x 10.5 mm |
Power Supply TC Bar S
Model: S050-1A150300M2
| Dimensions (L x W x H) | 108 x 52 x 34 mm |
| Weight | 300 g |
| Input (AC) | 100-240 V~, 50/60 Hz, 1.5 A |
| Output (DC) | 15 V max. 3 A, 45 W |
| AC plug type | 2-pin |
| DC out dimension | 5.5 x 2.1 x 11 mm |
| Relative humidity operation | 20 to 98 %, non-condensing |
| Relative humidity storage | 20 to 98 %, non-condensing |
| Operating temperature | 0° C to 40 °C 32 °F to 104 °F |
| Storage temperature range | -40 °C to 80 °C -40 °F to 176 °F |
TeamConnect Bar M
General
| Dimensions (L x W x H) | 750 x 71 x 95 mm |
| Weight | 2.5 kg |
| Operating temperature range | 0 °C to 40 °C 32 °F to 104 °F |
| Storage temperature range | -25 °C to 70 °C -13 °F to 158 °F |
| Relative humidity operation | 0 to 75 %, non-condensing |
| Relative humidity storage | 0 to 95 %, non-condensing |
| DC IN | 18 V $, max. 4 A |
| Max. power consumption | 72 W |
| Voltage range PoE (PSE) | 44.0 – 57.0 V (IEEE 802.3at Type 1, PoE) |
Power State Information
| Standby Mode (all ports deactivated) | ≤ 0.50 W (Entered after 2 hours with no activity on any network port) |
| Networked Standby (all ports activated) | ≤ 2.00 W (Entered after 18 minutes of inactivity) |
| Networked Standby (all ports activated) | ≤ 2.00 W |
Network port deactivation/activation procedures:
| Wi-Fi | Deactivate by pressing the Reset switch on TC Bar for 5 sec, or by disabling the Wi-Fi switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the Wi-Fi switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| Blue- tooth® | Deactivate by disabling the Bluetooth switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the Bluetooth switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| HDMI® | Deactivate by disabling the HDMI switch on the TC Bar tab in the Sennheiser Control Cockpit Software. Activate by enabling the HDMI switch on the TC Bar tab in the Sennheiser Control Cockpit Software. |
| Ethernet | Deactivate by removing the Ethernet cable. Activate by inserting the Ethernet cable. |
| USB | Deactivate by removing the USB cable. Activate by inserting the USB cable. |
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Loudspeaker
| Number of speakers Type Dimensions | 4 with passive radiator fullrange 50 mm (2″) |
| Amplifier | Class-D |
| Max. SPL (output) | 84 dB SPL |
| Total Audio Power (RMS/PEAK) | 20 W / 40 W |
Microphones
| Transducer principle | MEMS |
| Pick-up pattern | Adaptive Beamforming Array |
Camera
| Sensor | 8 MP |
| Technology | ePTZ |
| Diagonal field of view | 120° |
| Horizontal field of view | 115° |
Interfaces
| HDMI out 1 | HDMI 2.0 |
| HDMI out 2 | HDMI 2.0 |
| USB-C | USB 3.1 (Gen 1) |
| USB-A power output | USB 3.1 (Gen 1) 5 V max. 900 mA |
| Ethernet | 2 x 1000/100/10 Mbit/s (RJ45) Note: Only use network cables with the standard CAT5e (F/STP) or better. |
| DC IN dimension | 5.5 x 2.1 x 10.5 mm |
Power Supply TC Bar M
Model: E096-1A180500B3
| Dimensions (L x W x H) | 148 x 60 x 34 mm |
| Weight | 600 g |
| Input (AC) | 100-240 V~, 50/60 Hz, 1.5 A |
| Output (DC) | 18 V max. 5 A, 90 W |
| AC plug type | 3-pin |
| DC out dimension | 5.5 x 2.1 x 11 mm |
| Relative humidity operation | 20 to 98 %, non-condensing |
| Relative humidity storage | 20 to 98 %, non-condensing |
| Operating temperature | 0 °C to 40 °C 32 °F to 104 °F |
| Storage temperature | -40 °C to 80 °C -40 °F to 176 °F |
Wi-Fi
| Standard | IEEE 802.11a /b /g /n /ac |
| Transmission system | SISO (Single-In, Single-Out) |
| Frequency ranges (max. RF output power) | 2412 MHz – 2472 MHz (max 20 dBm RF power) 5150 MHz – 5350 MHz (max. 23 dBm RF power) 5470 MHz – 5725 MHz (max. 23 dBm RF power) 5725 MHz – 5850 MHz (max. 14 dBm RF power) |
| Modulation | 64QAM, 16QAM, QPSK, BPSK, CCK, DQPSK, DBPSK |
Bluetooth®
| Version | 5.1 |
| Transmission frequency | 2402 MHz – 2480 MHz |
| Modulation | GFSK, π/4 DQPSK, 8DPSK |
| Profiles | A2DP, HFP, AVRCP |
| Max. RF output power | 10 dBm |
| Codec | SBC |
For the frequency range 5150 MHz – 5350 MHz this device is restricted to indoor use for all EU member states as listed below:
 | AT | BE | BG | CY | CZ | DE |
| DK | FE | EL | ES | FI | FR | |
| HR | HU | IE | IT | LT | LU | |
| LV | MT | NL | PL | PT | RO | |
| SE | SI | SK | UK (NI) |
Certifications & Compatibility
Microsoft Teams, Zoom, Barco Click share, HDMI, Audinate Dante
RC TC Bar
| Transmission | infrared |
| Range | approx. 6 m |
| Power Supply | 2 AAA batteries, 1.5 V (alkali manganese) |
| Dimensions (L x W x H) | 126 x 40 x 14 mm |
| Weight Remote Control Holder | 60 g (incl. batteries) 160 g |
| Temperature range | -10 °C to 50 °C 14 °F to 122 °F |
Mounting Kit Bar S
| Dimensions (L x W x H) | 199 x 62 x 74 mm |
| Weight | ca. 340 g |
Mounting Kit Bar M
| Dimensions (L x W x H) | 268 x 66 x 86 mm |
| Weight | ca. 520 g |
Intended use
The product is designed for indoor use.
The product can be used for commercial purposes.
It is considered improper use when the product is used for any application not named in the corresponding instruction manual.
Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/ accessories.
Sennheiser is not liable for damage to external devices that do not meet the specifications of the device interfaces.
Manufacturer declarations
Notes on personal data
This product with integrated data storage may contain sensitive personal data.
Please note that you are responsible for the secure deletion of data in order to prevent data misuse if the product is sold/ passed on or disposed of.
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products.
For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Warranty FOR AUSTRALIA and NEW ZEALAND ONLY:
Sennheiser Australia Pty Ltd provides a warranty of 24 months on these products.
For the current warranty conditions, visit Sennheiser website:
Australia: https://en-au.sennheiser.com/
New Zealand: https://en-nz.sennheiser.com/
Sennheiser goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any remedy available to be consumer which is granted by law.
To make a claim under this contract, raise a case via Sennheiser website
Australia: https://en-au.sennheiser.com/service-support-contact
New Zealand: https://en-nz.sennheiser.com/service-sup-port-contact
All expenses of claiming the warranty will be borne by the person making the claim. Sennheiser international warranty is provided by: Sennheiser Australia Pty Ltd (ABN 68 165 388 312) Level 14, Tower A Zenith Building, 821 Pacific Highway, Chatswood NSW 2067, Australia
In compliance with the following requirements
EU:
- WEEE Directive (2012/19/EU)
- Battery Directive (2006/66/EC & 2013/56/EU)
UK:
- WEEE Regulations (2013)
- Battery Regulations (2015)
Notes on disposal
The symbol of the crossed-out dumpster on the product, the (rechargeable) battery (if applicable) and/or the packaging indicates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their service life. For the packaging, follow the regulations in your country for separating waste. Improper disposal of packaging materials can be harmful to your health and the environment.
The separate collection of waste electrical and electronic equipment, (rechargeable) batteries (if applicable) and packaging is intended to promote reuse and recycling and to pre- vent negative impacts on public health and the environment, for example due to hazardous substances contained in these products. At the end of their service life, recycle electrical and electronic equipment and (rechargeable) batteries so that their materials can be reused and to prevent environmental pollution.
If (rechargeable) batteries can be removed without destroying them, you are obliged to dispose of them separately (see the product’s operating instructions for information on how to remove the batteries safely). Be especially careful when handling (rechargeable) batteries containing lithium, as these pose special hazards, such as the risk of fire and/or health risks if button cells are swallowed. Reduce battery waste as much as possible by using longer-life batteries or rechargeable batteries.
Further information on the recycling of these products can be obtained from your municipal administration, from the municipal collection points, or from your Sennheiser partner. You may also be able to return electrical or electronic equipment to your distributor, if they are legally required to do so. By disposing of your batteries properly, you are helping to protect public health and the environment.
UK Declaration of conformity
- RoHS Regulations (2012)
Hereby, Sennheiser electronic GmbH & Co. KG declares that the radio equipment type TC Bar S | TC Bar M is in compliance with Directive 2014/53/EU.
Importer: Sennheiser UK Ltd.
Pacific House, Third Avenue, Globe Park, Marlow
Buckinghamshire SL7 1EY, United Kingdom
EU Declaration of conformity
- RoHS Directive (2011/65/EU)
- Radio Equipment Regulations (2017)
The full text of the EU declaration of conformity is available at the following internet address: www.sennheiser.com/download
Statements regarding the FCC and ISED
This device complies with Part 15 of the FCC rules, RSS-247 of Innovation, Science and Economic Development Canada (ISED). Operation is subject to the following two conditions: 1)
This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment.
RF Radiation Exposure Information
This device meets FCC/ ISED RF exposure guidelines for an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC / ISED RF exposure guidelines. The equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
In the US please contact:
Sennheiser Electronic Corporation
1 Enterprise Drive, Old Lyme, CT 06371
www.sennheiser.com
COMPLIANCE
| Product (model): | TeamConnect Bar S (TC Bar S) |
| Australia / New Zealand |  |
| Brazil |  TC Bar S: XXXXX-XXXXXX |
| Canada | IC: 2099A-TCBAR CAN ICES3(B)/NMB3(B) |
| China |  |
 XXXXXXXXXXXXX | |
| CMIT ID: XXX | |
| EU |  |
| Japan |  TC Bar S:T D 23 0013 201 R 201-230071 |
| USA |  FCC ID: DMOTCBAR |
| UK |  |
| Product (model): | TeamConnect Bar M (TC Bar M) |
| Australia / New Zealand | |
| Brazil | TC Bar S: XXXXX-XXXXXX |
| Canada | IC: 2099A-TCBAR CAN ICES3(B)/NMB3(B) |
| China | |
| XXXXXXXXXXXXX | |
| CMIT ID: XXX | |
| EU | |
| Japan | TC Bar S: T D 23 0013 201 R 201-230071 |
| USA | FCC ID: DMOTCBAR |
| UK | |
Product: Power Supply TC Bar S
Model: S050-1A150300M2
| Australia /New Zealand | SAA-190625-EA |
| Canada | CAN ICES3(B)/NMB3(B) |
| China |  |
 | |
| EU | |
| India | IS 13252 (Part 1)/IEC 60950-1 R-41239623 www.bis.gov.in |
| Japan |  |
| USA |  |
| South Korea |  HU10935-22045AR-R-3NB-S050 A/S Center: 070-4746-7903 |
| UK | |
| Taiwan |  R3A531 RoHS |
Product: Power Supply TC Bar M
Model: E096-1A180500B3
| Australia /New Zealand | SAA-190625-EA |
| Canada | CAN ICES3(B)/NMB3(B) |
| China | |
| |
| EU | |
| India | IS 13252 (Part 1)/IEC 60950-1 R-41239623 www.bis.gov.in |
| Japan | |
| USA | |
| South Korea | HU10935-22045A R-R-3NB-S050 A/S Center: 070-4746-7903 |
| UK | |
| Taiwan | R3A531 RoHS |
LICENSES
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic GmbH & Co.KG is under license. Other trademarks and trade names are those of their respective owners.
HDMI®
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Audinate®, Dante®
Audinate®, the Audinate logo and Dante® are registered trademarks of Audinate Pty Ltd. All other trademarks are the property of their respective owners.
Ethernet
Ethernet is a trademark of FUJIFILM Business Innovation Corp.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Publ. 03/23, 592876/A01
