JYL1126B-SET2 Sabrina 28.5 Inch Vintage Industrial Iron LED Table Lamp
Product Information
The product is a lamp with a model number of JYL1126-SET2. The
lamp consists of several parts, including a lamp base, saddle,
socket, harp, shade, finial, and bulb. The lamp’s dimensions are
14L x 7W x 28.5H. The lamp has a polarized plug for safety and
requires an on/off type A bulb with a maximum of 60 watts or an LED
bulb with a maximum of 9 watts.
Product Usage Instructions
- Inspect the item carefully before attempting to install. Do not
install if there is any damage or obvious defect as the item may
not be returned once installed. - Unplug the lamp before using any cleaning solutions. Dust the
shades with a feather duster or an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth, and clean the lamp bases
with methods appropriate to the material. Avoid using chemicals and
household cleaners as they may damage the finish. - Make sure you have all parts indicated before beginning
assembly of the item. Assemble the item on a soft surface to
prevent scratching the finish during assembly. - To reduce the risk of fire, electrical shock, or injury to
persons or property, follow the guidelines below for safe use and
installation:- The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp shall be destroyed. - This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Never use with
an extension cord unless the plug can be fully inserted. Do not
attempt to disregard this safety feature.
- The external flexible cable or cord of this lamp cannot be
- Insert the harp (D) into the saddle (B). Put the shade (E) on
the harp (D), then tighten the finial (F) into the harp (D). Insert
the bulb (G) into the socket (C). - Put the light on a level surface to check if everything is
stable. - Enjoy your lamp!
WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
E
Shade
1X
Model# JYL1126-SET2 Product Dimensions: 14″Lx 7″W x 28.5″H
B
Saddle
1X
F
Finial
1X
C
Socket
1X
G
Bulb
1X
D
Harp
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE IS LED 9-WATT BULB IN THE BOX .
1
2
Step 1 Insert the Harp (D) into the Saddle (B). Put the shade(E) on the Harp(D), then tighten the Finial (F)into the Harp (D) Insert the bulb(G) into the socket(C).
ENJOY YOUR LAMP
Step2 Put the light on a level surface to check if everything is stable.
