CWI Lighting 5025P34C-8 Abia 8 Light 34 inch Chrome Up Chandelier Ceiling Light
Assembly Instruction
Sheet #IS-5025P34 For St le 5025P34
Tools Required
- Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, and safety glasses. Light Source: (8) E12 Candelabra Base Bulbs 60W Maximum(Not include)+120V 1W LED □ IMMABLE Estimated Assembly Time: 20-30 minutes
Preparation
- Identify and inspect all parts before beginning installation. Check the package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for re-placement arts.
Warnings and Cautions
Turn off electricity at the circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt. These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation. Disconnect the fixture from the power source before replacing the bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
Hardware Contents
STEP 1 -Install Arm
STEP 2 Wire Connection
Install Metal cover
loosen Metal cover
loosen the Metal cover.
Wire Connections
Wire ConnectionsSTEP 6
STEP 7-Wire Connections
STEP 8 – Wire Connections
STEP 9 – Wire Connections
STEP 10-Wire Connections
STEP 11-Wire Connections
STEP13 – loosen Crossbar
STEP15 – Install Ceiling Canopy to Ceiling
STEP 14 – Attach Crossbar to Outlet Box
- A.Pass the supply wires through the Crossbar (EE). Attach the Crossbar (EE) to the Outlet Box (CC) with the head of the Green Ground Screw facing you. Secure it with Outlet Box Screws (not included). Tighten until snug.
STEP16 – Install Bulbs, Crystal, bobeches, and Socket sleeves.
