SK-500040 Angle Gauge

ANGLE GAUGE

Instruction Manual v1.0 SK – 500040

Introduction

Congratulations on your purchase of the SkyRC Angle Gauge. This
gauge consists of three sensing modules that are wirelessly
controlled through Bluetooth. It measures the surface angle and
relative angle difference. To get started, download the RC Gears
app.

What’s Inside the Box:

• Switch ChargePort
• LED Indicator
• SKYRC Angle Gauge x3

Connecting:

1. Long press the switch to turn on the modules. Enable Bluetooth
   on your smartphone and open the RC Gears app.
2. Search to connect.
3. Set up the reference surface, left and right. The corresponding
   module flashes blue during the setting.

Measuring Angles:

1. Connect the modules.
2. Fix the reference module to the position where the surface of
   the model aircraft is referenced.
3. Fix the left and right modules on the rudder surface to
   measure. Note: The right-angle must face the outside of the rudder
   surface and be parallel to the edge of the rudder surface.
4. Set and input the angle in reference to the model aircraft
   manual.
5. Set the angle to the maximum with the remote control and check
   whether the calibration range meets the requirements indicated in
   the manual.

Measure Throw:

1. Connect the modules and choose Throw to enter the page.
2. Fix the reference module to the position where the surface of
   the model aircraft is referenced.
3. Fix the left and right modules on the rudder surface to
   measure. Note: The right-angle must face the outside of the rudder
   surface and be parallel to the edge of the rudder surface.
4. Set the throw, measure the width of the rudder surface, and
   input the width and throw in reference to the model aircraft
   manual.

Note:

Make sure to scan the QR code to download the RC Gears app from
App Store or Google Play.

ANGLE GAUGE
Instruction Manual v1.0 SK – 500040
Introduction
Congratulations on the purchase of SkyRC Angle Gauge! The gauge consists of three sensing modules, which are wirelessly controlled through Bluetooth. It measures the surface angle and relative angle difference. Download the RC Gears app to get started to measure the real-time measuring data.
What is inside the box

Switch ChargePort

LED Indicator

* Actual angle to measure

* The right-angle side is the reference side for measuring

SKYRC Angle Gauge x3

Connecting
1. Long press to turn on. Enable the Bluetooth on your smartphone and open the APP.

* Long press the switch to turn on the modules.

RC Gears
GNSS Performance Analyzer GSM020
Corner Weight System SCWS2000
Center of Gravity Gauge CGG-020 & SAM-020

Center of Gravity Gauge

Name

Model one

Weight

CG

Angle Throw

RC Gears

* Please scan the QR code to download the RC Gears app from App Store or Google Play!

2. Search to connect

Searching…

Angle-meter Unassigned Scale Unassigned Scale Unassigned Scale

3. Set up the reference surface, left and right. The corresponding module flashes blue during the setting.

Angle meter Unassigned Scale Unassigned Scale Unassigned Scale

Angle meter Unassigned Scale

Position Back

Reference OK

1. SKYRC Angle Gauge

Reference

Left

Right

* The module flashes in blue

SKYRC Angle Gauge Instruction Manual
Measuring Angles
1. Connect the modules. 2. Fix the reference module to the position where the surface of the model aircraft is referenced.

3. Fix the left and right modules on the rudder surface to measure. Note: The right-angle must face the outside of the rudder surface and be parallel to the edge of the rudder surface.

4. Set and input the angle in reference to the model aircraft manual.

Name

Model one

Left angle

Elevator

Reference: sensor – relative

Reference angle
ZERO

Angle

Set angle

Up aileron Down aileron
Up elevator Down elevator
Up flap Down flap

5. Set the angle to the maximum with the remote control, and check whether the calibration range meets the requirements indicated in the manual

Name

Model one

Elevator

Reference: sensor – relative Angle

Set angle

Name

Model one

Elevator

Reference: sensor – relative

Angle

Set angle

37.5°

0°

35.6°

Left angle

Reference angle
ZERO

Right angle

RED warns that the maximum adjustable angle of the corresponding wing is greater than the calibration range

27.2°

0°

28.5°

Left angle

Reference angle
ZERO

Right angle

GREEN indicates that the maximum adjustable angle of the corresponding wing is within the calibration range

SKYRC Angle Gauge 2.

SKYRC Angle Gauge Instruction Manual

Measure Throw
1. Connect the modules, and choose Throw to enter the page. 2. Fix the reference module to the position where the surface of the model aircraft is referenced 3. Fix the left and right modules on the rudder surface to measure.
Note: The right-angle must face the outside of the rudder surface and be parallel to the edge of the rudder surface.
4. Set the throw, measure the width of the rudder surface, and input the width and throw in reference to the model aircraft manual.

Name

Model one

Elevator

Reference: sensor – relative Throw

Set throw

Left throw 0mm
ZERO

Aileron width 30 mm
Up aileron 10 mm
Down aileron 10 mm
Elavator width0.4mm30 mm
Up elevator 10 mm
Down Elevator 10 mm
Flap width 30 mm
Up flap 10 mm

5. Set the throw, measure the width of the rudder surface, and input the width and throw in reference to the model aircraft manual.

Name

Model one

Elevator

Reference: sensor – relative Throw

Set throw

Name

Model one

Elevator

Reference: sensor – relative Throw

Set throw

Left throw 16.5mm

Right throw 17.2mm

Left throw 16.5mm

Right throw 17.2mm

ZERO
RED warns that the maximum throw angle of the corresponding wing is greater than the calibration range
LED Indicator

ZERO
GREEN indicates that the maximum throw angle of the corresponding wing is within the calibration range

Constant Blue Flashing Blue

App is connected and working Standby, waiting to be connected

Flashing Red

Charging

Specifications
Working Voltage: 3.4-4.2V Working Current: 10mA Interface: Type C Input Voltage: 5V Input Current: 200-300mA

SKYRC Angle Gauge Instruction Manual

Low-voltage Protection: 3.4V (Flashes Red)
Measuring Accuracy: ±2O Throw Angle: ±0.1mm Working Temperature: 0OC-40OC Working Humidity:
5%-90% (No Condensation)

Storage Temperature: -10OC-50OC Storage Humidity:
1%-75% (No Condensation) Size: 48.1*25.6*12.6mm Weight: 25g

WARRANTY AND SERVICE
We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During that period, we will repair or replace free of service charge for products deemed defective due to those causes. This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to observe the procedures outlined in this manual. Note:
1. The warranty service is valid in China only. 2. If you need warranty service overseas, please contact your dealer in the first instance, who is responsible for
processing guarantee claims overseas. Due to high shipping cost, complicated custom clearance procedures to send back to China. Please understand SkyRC can’t provide warranty service to overseas end user directly. 3. If you have any questions which are not mentioned in the manual, please feel free to send email to [email protected]

3. SKYRC Angle Gauge

2021.05

7504-1490-01
SKYRC Angle Gauge 4.