Q-tran Qz-stick-ph-0-10v Led Power Supply Installation Guide (+ PDF)

Contents hide

QZ-STICK-PH-0-10V LED Power Supply

Product Information

The LED Power Supply – QZ-S is a power supply unit designed for
LED lighting systems. It has multiple compartments, including a
driver compartment, primary compartment, and secondary compartment.
The power supply also features mounting tab slots for easy
installation. The QZ-S is capable of dimming and supports both
phase dimming and 0-10V dimming. It has a power capacity of
96W.

Product Usage Instructions

Mounting: The QZ-S can be mounted either vertically or
horizontally. Use the supplied screws and the mounting tabs on the
bottom of the enclosure for installation. Ensure that the QZ-S is
mounted into a stud for sufficient support, using the slots of each
mounting tab.
Multiple Power Supply Installation: When installing multiple
QZ-S power supplies, separate the enclosures by 3 inches of space
from edge to edge. This prevents the rise of ambient temperature
between the power supplies.
Wiring: Refer to the provided wiring diagram for proper
installation. The wiring from the power supply to the light fixture
must be a two-conductor cable.

Note: The product specifications are subject to change.
Please refer to the latest revision of the user manual
(Rev-03-28-23) for the most up-to-date information.

View Fullscreen

INSTALLATION LED POWER SUPPLY – QZ-S

4 2

TOP VIEW
1
DRIVER COMPARTMENT

3 4

QZ-S Components

1 Driver Compartment

2 Primary Compartment 3 Secondary Compartment

4 Mounting Tab Slots

Specification subject to change. Rev-03-28-23

INSTALLATION LED POWER SUPPLY – QZ-S

Required Hardware

· #4 Flat head screw (not included)

.625″

.21″

Mounting

The QZ-S can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on the

bottom of the enclosure

SIDE SLOT

2 The QZ-S must be mounted into a stud for sufficient support, using the slots of each mounting tab

Specification subject to change. Rev-03-28-23

INSTALLATION LED POWER SUPPLY – QZ-S
3 When installing multiple QZ-S power supplies, seperate the enclosures by 3″ of space from edge to edge. This prevents the
rise of ambient temperature between the power supplies.
3.0″ 3.0″
3.0″

Horizontal mount illustrated above

Vertical mount illustrated above

Specification subject to change. Rev-03-28-23

LED LED

INSTALLATION LED POWER SUPPLY – QZ-S

4 Wiring diagram

Phase Dimming
96W
Phase Dimmer

– DIM + – OUTPUT +

LED OUTPUT

–

DIMMING
0/1-10V

INPUT