OVATION REVE E3 Color LED Ellipsoidal Lighting
Product Information:
Chauvet Ovation E-190WW LED Ellipsoidal
The Chauvet Ovation E-190WW LED Ellipsoidal is a professional
lighting fixture that provides bright and vibrant lighting for
stage performances or events. The fixture comes with a model ID of
OVATIONREVEE3. The product dimensions are 26.9 x 16.9 x 14.3 inches
(683 x 429 x 362 mm) and it weighs 30.8 lbs (13.97 kg). Please note
that lenses are sold separately.
Features:
- High-quality LED source
- Smooth dimming capabilities
- Quiet operation
- Adjustable PWM frequency for flicker-free operation
- DMX control options
- Lightweight and compact design
Product Usage:
Please read through the user manual before installing,
operating, or maintaining the product. The intended audience for
this product includes any person operating or maintaining the
product.
Setup:
- Ensure that you have all the necessary components of the
Ovation E-190WW LED Ellipsoidal, including lenses and DMX cables
(if required). - If DMX control is required, link the fixture to your DMX
controller using DMX cables. - Select the DMX personality that corresponds with your
controller’s settings. - Configure the PWM frequency for flicker-free operation.
- Mount the fixture securely using appropriate rigging or
mounting hardware. - Connect the fixture to a power source using the appropriate
cables and ensure that it is properly grounded. - Power on the fixture and test its operation.
Safety Notes:
Ensure that you follow all safety precautions before operating
the fixture. This includes personal safety, mounting and rigging,
power and wiring, and operation. Please refer to the user manual
for more detailed safety information.
- Personal Safety: Do not look directly into the LED light
source. Avoid touching any hot surfaces after extended periods of
use. Always use appropriate protective gear when handling the
fixture. - Mounting and Rigging: Ensure that the fixture is mounted
securely using appropriate rigging or mounting hardware. Do not
overload truss systems or mounting points. Always use a safety
cable to secure the fixture. - Power and Wiring: Ensure that the fixture is properly grounded
and wired according to local electrical codes. Use only
high-quality cables and connectors to avoid electrical
hazards. - Operation: Do not operate the fixture in wet or humid
conditions. Avoid exposing the fixture to extreme temperatures or
direct sunlight. Use only as directed and do not modify the fixture
in any way.
USER MANUAL
*lenses sold separately
Model ID: OVATIONREVEE3
Edition Notes
The Ovation Rêve E-3 User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Ovation Rêve E-3.
Trademarks
CHAUVET, the Chauvet logo and Ovation Rêve E-3 are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet. © Copyright 2022 Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com.
Document Revision
This Ovation Rêve E-3 User Manual is the 4th edition of this document. Go to www.chauvetprofessional.com for the latest version.
Ovation Rêve E-3 User Manual Rev. 4
Table of Contents
TABLE OF CONTENTS
1. Before You Begin …………………………………………………………….. 1
What Is Included ………………………………………………………………………………. 1
Claims …………………………………………………………………………………………….. 1
Manual Conventions …………………………………………………………………………. 1
Symbols ………………………………………………………………………………………….. 1
RF Exposure Warning for North America and Australia………………………….. 1
Safety Notes…………………………………………………………………………………….. 2 Personal Safety……………………………………………………………………………………………….. 2 Mounting and Rigging ………………………………………………………………………………………. 2 Power and Wiring…………………………………………………………………………………………….. 2
Operation ………………………………………………………………………………………… 2
Expected LED Lifespan……………………………………………………………………… 2
2. Introduction …………………………………………………………………….. 3
Features ………………………………………………………………………………………….. 3
Product Overview……………………………………………………………………………… 4
Product Dimensions ………………………………………………………………………….. 5
3. Setup ………………………………………………………………………………. 6
AC Power ………………………………………………………………………………………… 6 AC Plug ………………………………………………………………………………………………………….. 6 Power Linking………………………………………………………………………………………………….. 6 Fuse Replacement …………………………………………………………………………………………… 6
DMX Linking…………………………………………………………………………………….. 6 DMX Personalities……………………………………………………………………………………………. 6 Remote Device Management…………………………………………………………………………….. 6
Master/Slave Connectivity………………………………………………………………….. 7
Mounting …………………………………………………………………………………………. 7 Orientation………………………………………………………………………………………………………. 7 Rigging …………………………………………………………………………………………………………… 7 Procedure……………………………………………………………………………………………………….. 8 Adjustable Yoke ………………………………………………………………………………………………. 8
USB Software Update ……………………………………………………………………….. 9
Lens Tubes ……………………………………………………………………………………… 9
Soft Focus Filter ……………………………………………………………………………….. 9
4. Operation ………………………………………………………………………… 10
Control Panel Operation…………………………………………………………………….. 10
Control Options ………………………………………………………………………………… 10
Programming……………………………………………………………………………………. 10
Configuration (DMX) …………………………………………………………………………. 10 DMX Personalities……………………………………………………………………………………………. 10 Starting Address………………………………………………………………………………………………. 10
Menu Map ……………………………………………………………………………………….. 11
Configuration (Standalone) ………………………………………………………………… 15 Virtual Color Wheel ………………………………………………………………………………………….. 15 Color Temperature …………………………………………………………………………………………… 15 Manual Color Mixer ………………………………………………………………………………………….. 15 Color X-Fade Speed ………………………………………………………………………………………… 15 Auto Programs ………………………………………………………………………………………………… 15
Ovation Rêve E-3 User Manual Rev. 4
i
Table of Contents
Red Shift ………………………………………………………………………………………………………… 15 Master/Slave …………………………………………………………………………………………………… 15 Dimmer Curve …………………………………………………………………………………………………. 16 Dimmer Profiles……………………………………………………………………………………………….. 16 Color Calibration ……………………………………………………………………………………………… 16 LED Frequency ……………………………………………………………………………………………….. 16 Fan Mode ……………………………………………………………………………………………………….. 16 Back Light ………………………………………………………………………………………………………. 16 System Information ………………………………………………………………………………………….. 16
Virtual Color Wheel …………………………………………………………………………… 17 Virtual Color Wheel Chart …………………………………………………………………………………. 17 Color Temperature Chart ………………………………………………………………………………….. 18 Color Temperature DMX Chart ………………………………………………………………………….. 18
DMX Values …………………………………………………………………………………….. 19 18Ch………………………………………………………………………………………………………………. 19 14Ch1…………………………………………………………………………………………………………….. 20 14Ch2…………………………………………………………………………………………………………….. 21 12Ch………………………………………………………………………………………………………………. 21 8Ch………………………………………………………………………………………………………………… 21 6Ch………………………………………………………………………………………………………………… 22 5Ch………………………………………………………………………………………………………………… 22 1Ch………………………………………………………………………………………………………………… 22 HSV……………………………………………………………………………………………………………….. 22
5. Technical Information ………………………………………………………. 23
Product Maintenance ………………………………………………………………………… 23
6. Technical Specifications ………………………………………………….. 24
Returns……………………………………………………………………………….. 25
Contact Us ………………………………………………………………………….. 26
ii
Ovation Rêve E-3 User Manual Rev. 4
BEFORE YOU BEGIN
1. Before You Begin
What Is Included
· Ovation Rêve E-3 · Seetronic Powerkon IP65 power cord · Ovation metal gobo holder
· Soft focus filter · Quick Reference Guide
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Convention
1512 50/60 <SET> Settings
Meaning
A range of values A set of values of which only one can be chosen A button on the product’s control panel A product function or a menu option
Symbols
Symbol
Meaning
Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
!
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Ovation Rêve E-3 User Manual Rev. 4
Page 1 of 26
BEFORE YOU BEGIN
Safety Notes
Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in
! this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on. · Always disconnect the product from the power source before cleaning or replacing the fuse. · Always connect the product to a grounded circuit to avoid the risk of electrocution. · Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
· This product is for indoor use only! Do not operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (IP20).
· Do not leave any flammable material within 50 cm of this product while operating or connected to power.
· CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
· When hanging this product, always secure to a fastening device using a safety cable. · Use only the hanging/mounting bracket to carry this product.
Power and Wiring
· Ensure that the power cord is not crimped or damaged. · Always ensure that the product is connected to proper voltage in accordance with the specifications
in this manual or on the product’s specification label. · Make sure to replace the fuse with another of the same type and rating. · Never connect the product to a dimmer pack or rheostat. · Never disconnect this product by pulling or tugging on the power cable.
Operation
· The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 10 ft (3 m) is not expected.
· If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
· The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
· The luminaire is intended for professional use only. · Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once. · Do not cover the ventilation slots when operating to avoid internal overheating. · The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures. · The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures. · The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures. · In the event of a serious operation problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.
Page 2 of 26
Ovation Rêve E-3 User Manual Rev. 4
INTRODUCTION
2. Introduction
Features
· Operating modes: · HSV: hue, saturation, value control, gobo rotator · 1-channel: dimmer · 5-channel: dimmer, virtual color wheel (VCW), color temperature, hue, gobo rotator · 6-channel: red, green, blue, amber, mint (RGBAM) control, gobo rotator · 8-channel: dimmer, RGBAM control, strobe, gobo rotator · 12-channel: 16-bit dimmer, RGBAM control, strobe, VCW, color temperature, hue, gobo rotator · 14-channel: dimmer, RGBAM control, strobe, VCW, color temperature, hue, auto programs, auto speed, control, gobo rotator · 14-channel: 16-bit dimmer, 16-bit RGBAM control, strobe, gobo rotator · 18-channel: 16-bit RGBAM and dimmer, strobe, VCW, color temperature, hue, control, gobo rotator
· Full-spectrum LED ERS-style lighting fixture for theatre, film and production · Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS · Virtual color wheel with color matched to popular gel colors · +/- Green adjustment and emulated red-shift via DMX or on-board control · RDM (Remote Device Management) for added flexibility · Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera · Virtually silent operation for use in studio, film and theatre applications · Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme. · Innovative adjustable yoke for mounting in low clearance areas · Direct power/data connection and control options for the Ovation GR-1 gobo rotator · USB port for fixture software updates
Ovation Rêve E-3 User Manual Rev. 4
Page 3 of 26
Product Overview
INTRODUCTION
Beam focus knobs (x2)
Framing shutters (x4)
Handle / Mounting bracket
Bracket adjustment knobs (x2)
Control panel
Menu buttons Power in Fuse
Power out Safety loop
3- and 5-pin DMX in
USB port 3- and 5-pin DMX out
Lens tube (sold separately)
Page 4 of 26
Ovation Rêve E-3 User Manual Rev. 4
INTRODUCTION Product Dimensions
19.75 in (501 mm)
20.44 in (519 mm)
26.83 in (681 mm)
10.71 in (272 mm)
13.07 in (332 mm)
Ovation Rêve E-3 User Manual Rev. 4
Page 5 of 26
SETUP
3. Setup
AC Power
Each Ovation Rêve E-3 has an auto-ranging power supply that works with an input voltage range of 100 to 240 V~, 50/60 Hz. To determine the power requirements for each Ovation Rêve E-3, refer to the label affixed to the product or to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
· Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
!
the product has an appropriate electrical ground to avoid the risk of electrocution or fire. · To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Ovation Rêve E-3 comes with a power input cord terminated with a Seetronic Powerkon IP65 connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live AC Neutral AC Ground
Black White Green/Yellow
Brown Blue Green/Yellow
Yellow or Brass Silver Green
Power Linking
The product supports power linking. It is possible to link up to 3 Ovation Rêve E-3 products at 100 V, 4 products at 120 V, 7 products at 208 V, or 8 products at 230/240 V. This product comes with a power input cord. Power-linking cables are available for purchase from Chauvet.
Fuse Replacement
1. Disconnect this product from the power outlet. 2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing. 3. Remove the blown fuse and replace with another fuse of the same type and rating (T 6.3 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
!
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the same type and rating.
DMX Linking
The Ovation Rêve E-3 can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using other DMX-compatible products with this product, it is possible to control each individually with a single DMX controller.
DMX Personalities
The Ovation Rêve E-3 uses a 3- and 5-pin DMX data connection for the 1Ch, 5Ch, 6Ch, 8Ch, 12Ch, 14Ch1, 14Ch2, 18Ch, and HSV DMX personalities.
· Refer to the Introduction for a brief description of each DMX personality.
· Refer to the Operation chapter to learn how to configure the Ovation Rêve E-3 to work in these personalities.
· The DMX Values section provides detailed information regarding the DMX personalities.
For information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check with the manufacturer or the DMX controller’s User Manual, as not all DMX controllers have this capability. The Ovation Rêve E-3 supports RDM protocol that allows feedback to make changes to menu map options.
Page 6 of 26
Ovation Rêve E-3 User Manual Rev. 4
SETUP
Master/Slave Connectivity
The Master/Slave mode allows an Ovation Rêve E-3 (the master) to control one or more Ovation Rêve E-3 products (the slaves) without a DMX controller. Once Ovation Rêve E-3 becomes the master when running an auto or custom program, or in Static mode. Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master.
· The Operation section of this manual provides detailed instructions on how to configure the master and slaves.
· For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX primer from the Chauvet website: www.chauvetprofessional.com.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For CHAUVET Professional line of mounting clamps, go to: http://trusst.com/products/.
Orientation
Always mount this product in a safe position, ensuring that there is adequate room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product: · Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes. · Make sure that the structure onto which the product will be mounted can support the product’s weight. See the Technical Specifications for weight information. · When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss. · When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. · When power linking multiple products, mount the products close enough for power-linking cables to reach. · The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Ovation Rêve E-3 User Manual Rev. 4
Page 7 of 26
SETUP
Procedure
The Ovation Rêve E-3 comes with a double-bracketed yoke that can be used as a floor stand or to which mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the clamps can support the weight of this product. Use at least one mounting point per product where necessary.
Mounting Diagram
Mounting clamp
Safety cable
Secure the safety cable using the passageway on the top of the product
Mounting bracket
* Lens tubes sold separately
Overhead Mounting
Adjustable Yoke
The Ovation Rêve E-3 comes with an adjustable yoke for mounting in low-clearance areas. To modify the height of the yoke, do the following:
1. Loosen the bracket adjustment knobs on both sides of the fixture. 2. On each side of the fixture, remove the two screws and loosen the bolt attaching the plate to the
mounting bracket. 3. Using the screw holes as guide, adjust the position of the mounting bracket to achieve the desired
height of the yoke. 4. Put the screws back in place, and tighten the bolts and the bracket adjustment knobs.
3 1
Page 8 of 26
2 Ovation Rêve E-3 User Manual Rev. 4
SETUP
USB Software Update
The Ovation Rêve E-3 allows for software update through USB using the built-in USB port. To update the software using USB flash drive, do the following:
1. Power on the fixture and plug the flash drive into the USB port. 2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press
<ENTER>. · If a different message appears on the display, search for the updated software in the Main Menu
(Update Firmware) and select from Only This Unit, Multiple Units, or Other Fixture Type. A list of the software update files will be displayed. 3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press <ENTER>. 4. If the selected file is correct, the upgrade will be completed. Restart the fixture. · If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat steps 1-3 using the correct file.
The .chl format file needs to be placed in the OVATION folder in the USB flash drive.
The “Other Fixture Type” option can only be selected for connected products compatible with the Upload 03 (the first 2 digits of the item code must be 03).
Lens Tubes
The following lens tubes are available for purchase: · 19°, 26°, 36°, and 50° with gel frame (6.25 in/159 mm accessories) · 5° gel frame (14 in/356 mm) · 10° gel frame (12 in/304 mm) · 14°, 1530° and 25°50° zoom gel frame (7.5 in/191 mm accessories)
Soft Focus Filter
The Ovation Rêve E-3 comes with a soft focus filter. To keep the soft focus filter in good condition: · Ensure that no fingerprints are left on the filter, as this may cause the filter to heat unevenly and eventually warp. · When placing the filter in the holder, follow the orientation direction printed on the filter. · When inserting shutter blades into the light path, note that the heat is reflected back at the filter. The deeper the blades are inserted, and the longer the fixture runs, the more heat gets reflected on to the filter, causing it to warp and potentially adhere to the shutter blades.
If there is a protective film on the soft-focus filter, it must be removed before use. The filter is in a holder in the metal gobo slot.
Ovation Rêve E-3 User Manual Rev. 4
Page 9 of 26
OPERATION
4. Operation
Control Panel Operation
Button Function
<MENU> Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric value when in a function
Control Options
Set the Ovation Rêve E-3 starting address in the 001-512 DMX range. This enables control of up to 8 products in the 17-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming levels for each option.
· To go to the desired main level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will show the first programming level for that option.
· To select an option or value within the current programming level, press <UP> or <DOWN> until the option shows on the display. Press <ENTER> to select. This will show either the first option if there is another programming level, or the selected value.
· Press <MENU> repeatedly to exit to the previous main level.
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows the user to choose a particular DMX personality. 1. Go to the DMX Channel main level. 2. Select the desired personality (1Ch, 5Ch, 6Ch, 8Ch, 12Ch, 14Ch1, 14Ch2, 18Ch, and HSV).
· See the Starting Address section for the highest starting address suggested for each personality.
· Make sure that the starting addresses on the various products do not overlap due to the new personality setting.
Starting Address
In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison.
1. Go to the DMX Address main level. 2. Set the starting address (001512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality
HSV 1Ch 5Ch 6Ch
DMX Address
509 512 508 507
DMX Personality
8Ch 12Ch 14Ch 18Ch
DMX Address
505 501 499 495
Page 10 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
Menu Map
Refer to the Ovation Rêve E-3 product page on www.chauvetprofessional.com for the latest menu map.
Main Level
Programming Levels
Description
DMX Address
DMX Channel
Virtual Color Wheel
001512*
Selects DMX address (*highest channel restricted to personality chosen)
Virtual Color Wheel
1Ch
Color Temperature 1-channel: dimmer
Manual Color Mixer
5-channel: dimmer, virtual color wheel
5Ch
(VCW), color temperature, hue, gobo
rotator
6Ch
6-channel: red, green, blue, amber, mint, gobo rotator
8Ch
8-channel: dimmer, RGBAM, strobe, gobo rotator
12Ch
12-channel: 16-bit dimmer, RGBAM, strobe, VCW, color temperature, hue, gobo rotator
14Ch1
14-channel: dimmer, RGBAM, strobe, VCW, color temperature, hue, auto programs, auto speed, control, gobo rotator
14Ch2
14-channel: 16-bit dimmer, 16-bit RGBAM, strobe, gobo rotator
18Ch
18-channel: 16-bit RGBAM and dimmer, strobe, VCW, color temperature, hue, control, gobo rotator
HSV
4-channel: hue, saturation, value, gobo rotator
C3050 – Md Yellow
C3040 – Lt Yellow
C3240 – Amb Yellow
C2340 – VLt Amber
C2040 – Lt Amber
C2050 – Md Amber
C2060 – Dk Amber
C1050 – Lt Red
C1080 – Md Red
C1020 – NC Pink
C1030 – Md Pink
Virtual Color Wheel
C1630 – Dk Pink
C1250 – Md Red Amber
Dimmer 0255
Virtual Color Wheel simulates the output of each gel color. Refer to the Virtual Color Wheel Chart for specific values.
C1060 – Dk Red Amber
C1650 – Magenta
C6170 – Dk Magenta
C6020 – Lt Lavender
C5030 – Lt Blue
C5020 – VLt Blue
C5430 – Lt Blue 2
C5070 – Blue
C5050 – Md Blue
C5060 – Dk Blue
C5690 – Indigo
C5080 – VDk Blue
Ovation Rêve E-3 User Manual Rev. 4
Page 11 of 26
OPERATION
Main Level
Programming Levels
C5081 – VDk Blue 2
C4370 – Yel Green
Virtual Color C4070 – Green Wheel C4550 – Turquoise
C4560 – Aqua
C4570 – Blue Green
2800K
2900K
3000K
3100K
3200K
3300K
3400K 3500K
Dimmer
3600K
3700K
3800K
3900K
4000K
4100K
4200K
Virtual Color Wheel
Color Temperature
4300K 4400K 4500K 4600K
4700K
4800K
4900K
5000K
5100K
5200K 5300K
Hue
5400K
5500K
5600K
5700K
6000K
6500K
7000K
7500K
8000K
Red
Manual Color Mixer
Green Blue Amber
Mint
Description
Dimmer 0255
Virtual Color Wheel simulates the output of each gel color. Refer to the Virtual Color Wheel Chart for specific values.
0255
Preset white color temperatures. Emulates a tungsten lamp at the specified color temperature. Refer to the Color Temperature Chart for specific values.
-2525
000255
Combines red, green, blue, amber, and mint to make a custom color (0100%)
Page 12 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
Main Level
Programming Levels
Description
Off
Turns off the fade transition between colors
Color XFade Speed
X-Fade Speed 1 X-Fade Speed 2 X-Fade Speed 3 X-Fade Speed 4
Creates fade transition between colors when using colors in the Virtual Color Wheel or Color Temperature chart, from fast (X-Fade Speed 1) to slow (X-Fade Speed 4)
Auto Show
Auto 15
1100
Selects automatic programs and auto program speed
Red Shift
On Off
Mimics halogen lamp dimming
Gobo Rotator
000255
Controls the gobo rotator
Master/ Slave
Master Slave
Receives DMX signal from the DMX controller (master)
Receives DMX signal from the master unit
SCurve
Dimmer Curve
Linear Square
Sets the dimmer curve
Inverse Square
Dimmer Mode
Off Dimmer 13
Linear dimmer
Dimming curves, from fast (Dimmer 1) to slow (Dimmer 3)
Off
Deactivates color calibration
Red
Sets red LED maximum value
Color
User
Calibration Calibration
Green Blue Amber
Sets green LED maximum value 125255 Sets blue LED maximum value
Sets amber LED maximum value
Mint
Sets mint LED maximum value
Factory Calibration
Uses factory default white setting
600Hz
1200Hz
LED Frequency
2000Hz 4000Hz
Sets the PWM output frequency
6000Hz
25KHz
Auto
Sets the fan to auto mode
Fan Mode
On
Sets the fan to always on
Off
Sets the fan to always off
Silent
Sets the fan to silent
10S
Turns off display backlight after 10 seconds of inactivity
Back Light
30S
Turns off display backlight after 30 seconds of inactivity
2Min
Turns off display backlight after 2 minutes of inactivity
Always On
Display backlight always on
Gobo Power
On Off
Enables/disables gobo power output
Ovation Rêve E-3 User Manual Rev. 4
Page 13 of 26
OPERATION
Main Level
Programming Levels
Description
Fixture Hours
_ _ _ _H
Shows total hours the product has been powered on
Information
LED Hours
_ _ _ _H
Shows total hours the LED has been powered on
Version
V_._
Shows current firmware version
UID
_ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Only This Unit
_ _ _ _ _ _.CHL …
Selects an update file for this product, or shows “No such file!”
Update Firmware
Multiple Units Other Fixture Type
_ _ _ _ _ _.CHL …
_ _ _ _ _ _.CHL …
Selects an update file for this and connected Ovation Rêve E-3 products, or shows “No such file!”
Selects an update file for other connected products, or shows “No such file!”
Reset Factory
No Yes
Resets settings to factory default
WARNING: When operating in Fan Mode: Off and Fan Mode: Silent, the fixture will
! become hotter to the touch than when using other fan modes. Use proper protective equipment to prevent burns. Keep a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off and Fan Mode: Silent, output of the fixture will be reduced and will not reach the same levels as when using other fan modes.
Page 14 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Virtual Color Wheel
1. Go to the Virtual Color Wheel main level. 2. Select Virtual Color Wheel. 3. Select the desired gel color (see Virtual Color Wheel Chart). 4. Select the desired output level (000255).
Color Temperature
To select a color temperature, do the following: 1. Go to the Virtual Color Wheel main level. 2. Select Color Temperature. 3. Select the desired color temperature (see Color Temperature Chart). 4. Select the desired output level (000255).
Manual Color Mixer
To do color mixing without a DMX controller, follow the instructions below: 1. Go to the Virtual Color Wheel main level. 2. Select Manual Color Mixer. 3. Select the color to edit (Red, Green, Blue, Amber, or Mint). 4. Select the desired output level for that color (000255). 5. Repeat steps 3 and 4 until product outputs as desired.
Color X-Fade Speed
To create fade transition between colors when using colors in the Virtual Color Wheel or Color Temperature Chart, do the following:
1. Go to the Virtual Color Wheel main level. 2. Select Color X-Fade Speed. 3. Select X-Fade Speed 1-4 (from fast to slow), or Off (to turn off the fade transition between colors).
Auto Programs
Auto programs allow for dynamic RGBAL color mixing without a DMX controller. 1. Go to Auto Show main level. 2. Select the desired auto program (Auto 15). 3. Select the desired speed (1100).
Red Shift
The Red Shift function causes the amber LEDs to imitate the appearance of a halogen lamp when dimming. To adjust the Red Shift function, do the following:
1. Go to the Red Shift main level. 2. Select On or Off.
Master/Slave
The Master/Slave mode allows a group of Ovation Rêve E-3 products (the slaves) to simultaneously duplicate the output of another Ovation Rêve E-3 (the master) without a DMX controller. To set each of the slaves:
1. Go to the Master/Slave main level 2. Select Slave. To set the master: 1. Go to the Master/Slave main level 2. Select Master. 3. Select a static setting.
· The master is the one that runs a program whether in Auto or Static mode. · Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master. · The master should be the first product in the daisy chain.
Ovation Rêve E-3 User Manual Rev. 4
Page 15 of 26
OPERATION
Dimmer Curve
To set the dimmer curve, follow the instructions below: 1. Go to the Dimmer Curve main level. 2. Select the desired option (SCurve, Linear, Square, or Inverse Square).
Dimmer Profiles
This setting determines how fast the output of the Ovation Rêve E-3 changes when the output value is modified. It provides four different options to simulate the dimming curve of an incandescent lighting product. To select a specific dimmer profile, do the following:
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
Off: The output is proportional (linear) to the dimmer channel value. Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer curve, Dimmer 1 being the fastest.
!
For optimum control of the 16-bit dimming channels in the 12Ch, 14Ch2, and 18Ch personalities, ensure that the dimming curves in Dimmer Mode are set to Off.
Color Calibration
This setting determines the maximum output values for each color, which affects the appearance of a full output white.
1. Go to the Color Calibration main level.
2. Select Off (deactivates color calibration), User Calibration, or Factory Calibration (the product will use a default white setting).
3. For User Calibration mode, select the color value to edit (Red, Green, Blue, Amber, or Mint).
4. Set the maximum value for the selected color (125255).
5. Repeat steps 3 and 4 until the product outputs as desired.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation Rêve E-3. To do so, follow the instructions below:
1. Go to the LED Frequency main level. 2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).
Fan Mode
This setting determines how the fan speed on the Ovation Rêve E-3 is set. 1. Go to the Fan Mode main level 2. Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will stay off. Product output will decrease based on product temperature), Silent (fan will maintain a
constant silent speed), or On (fan speed will always be at maximum).
NOTICE: When operating in Fan Mode: Off, the output of the fixture will be reduced and will not reach the same levels as when using other fan modes.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
!
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation Rêve E-3’s display stays on after the last button is pressed on the control panel.
1. Go to the Back Light main level. 2. Select 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On (remains on).
System Information
This option displays the total number of hours the product has run, the installed software version, and the product’s UID.
1. Go to the Information main level. 2. Select Fixture Hours, LED Hours, Version, or UID.
Page 16 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
Virtual Color Wheel
The Ovation Rêve E-3 includes a feature called the Virtual Color Wheel (VCW). This feature is available as a standalone control mode for manual use and as a control channel in select DMX personalities. More than 30 premixed colors, custom blended by Chauvet engineers, are available to call up for easier programming.
The DMX values used to mix these colors are provided below. The overall intensity of the Ovation fixture can be adjusted to more closely replicate familiar industry-standard colors. A chart is available at www.chauvetprofessional.com to compare Chauvet’s premixed colors with popular gel colors. This chart is
for comparison purposes only and is not an assertion that Chauvet’s premixed colors match any of the gel colors listed.
Virtual Color Wheel Chart
DMX Channel Value
Display Readout
Red Value
Green Value
Blue Value
Amber Value
Mint Value
000 005
—
—
—
—
—
—
006 013 C3050 – Md Yellow
255
225
0
255
37
014 021 C3040 – Lt Yellow
255
177
3
255
37
022 028 C3240 – Amb Yellow
255
220
0
255
0
029 035 C2340 – VLt Amber
195
0
15
255
57
036 043 C2040 – Lt Amber
255
0
11
255
61
044 051 C2050 – Md Amber
255
53
0
255
17
052 059 C2060 – Dk Amber
255
8
0
255
17
060 067 C1050 – Lt Red
255
0
3
14
0
068 075 C1080 – Md Red
255
0
2
0
0
076 083 C1020 – NC Pink
255
75
62
255
73
084 091 C1030 – Md Pink
255
75
57
255
41
092 099 C1630 – Dk Pink
218
77
57
255
61
100 107 C1250 – Md Red Amber
255
0
9
168
0
108 115 C1060 – Dk Red Amber
255
5
9
36
0
116 121 C1650 – Magenta
255
3
62
255
12
122 130 C6170 – Dk Magenta
255
0
55
0
0
131 138 C6020 – Lt Lavender
255
220
93
255
44
139 146 C5030 – Lt Blue
0
255
159
112
78
147 154 C5020 – VLt Blue
0
215
145
196
65
155 162 C5430 – Lt Blue2
0
215
132
52
92
163 170 C5070 – Blue
0
195
188
0
19
171 178 C5050 – Md Blue
0
163
190
0
68
179 186 C5060 – Dk Blue
0
128
193
0
38
187 194 C5690 – Indigo
53
9
255
0
0
195 202 C5080 – VDk Blue
7
84
116
0
0
203 210 C5081 – VDk Blue2
11
82
139
0
0
211 218 C4370 – Yel Green
0
255
2
25
0
219 226 C4070 – Green
0
255
9
0
175
227 234 C4550 – Turquoise
0
255
87
96
255
235 242 C4560 – Aqua
0
255
98
44
255
243 250 C4570 – Blue Green
0
255
26
8
0
251 255
—
—
—
—
—
—
Note: The colors above are simulated renditions of the color output produced compared with other similar incandescent products. Chauvet makes no guarantee of the color output accuracy.
Ovation Rêve E-3 User Manual Rev. 4
Page 17 of 26
OPERATION
Color Temperature Chart
Color Temperature
2800K 2900K 3000K 3100K 3200K 3300K 3400K 3500K 3600K 3700K 3800K 3900K 4000K 4100K 4200K 4300K 4400K 4500K 4600K 4700K 4800K 4900K 5000K 5100K 5200K 5300K 5400K 5500K 5600K 5700K 6000K 6500K 7000K 7500K 8000K
Red Value
253 253 251 248 245 242 237 230 225 221 220 220 210 205 199 189 183 174 170 166 164 163 163 163 163 163 162 162 162 159 158 152 144 127 122
Green Value
0 3 5 7 9 13 22 30 40 48 48 50 58 63 68 69 71 78 80 89 98 100 103 108 116 118 122 124 127 127 134 152 157 172 175
Blue Value
25 28 33 36 45 47 53 58 64 70 74 79 84 88 95 98 103 107 112 119 123 129 137 142 147 156 162 166 172 177 192 206 224 238 255
Amber Value
255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 241 225 218 218 200
Mint Value
145 153 161 169 173 182 185 185 185 185 197 203 203 203 204 204 204 204 204 204 203 205 206 208 208 210 216 224 229 231 231 231 231 231 231
Note: The color temperatures above are simulated renditions of the color output produced compared with a tungsten lamp at the specified color temperature. Chauvet makes no guarantee of the color output accuracy.
Color Temperature DMX Chart
DMX Channel
000 005 006 013 014 020 021 027 028 034 035 041 042 048 049 055 056 062 063 069 070 076 077 083
Color Temperature
No function 28002900K 29003000K 30003100K 31003200K 32003300K 33003400K 34003500K 35003600K 36003700K 37003800K 38003900K
DMX Channel
084 090 091 097 098 104 105 111 112 118 119 125 126 132 133 139 140 146 147 153 154 160 161 167
Color Temperature
39004000K 40004100K 41004200K 42004300K 43004400K 44004500K 45004600K 46004700K 47004800K 48004900K 49005000K 50005100K
DMX Channel
168 174 175 181 182 188 189 195 196 202 203 209 210 216 217 223 224 230 231 237 238 244 245 255
Color Temperature
51005200K 52005300K 53005400K 54005500K 55005600K 56005700K 57006000K 60006500K 65007000K 70007500K 75008000K
8000K
Page 18 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
DMX Values
18Ch
Channel
1 2 3 4 5 6 7 8 9 10 11 12
Function
Dimmer Dimmer fine Red Red fine Green Green fine Blue Blue fine Amber Amber fine Mint Mint fine
13
Strobe
14
Virtual color wheel
15
Color temperature
16
Hue
17
Control
(hold for 3 seconds)
18
Gobo rotator
Value
000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 010 011 255 000 255 000 255 000 000 001 255 000 007 008 015 016 023 024 031 032 039 040 047 048 055 056 063 064 071 072 079 080 087 088 095 096 103 104 111 112 119 120 127 128 135 136 143 144 151 152 159 160 167 168 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% No function Strobe, slow to fast Refer to Virtual Color Wheel Chart Refer to Color Temperature DMX Chart 0 -2525 No function Dimmer reset Red shift on Red shift off S-curve dimmer Linear dimmer Square dimmer curve Inverse square dimmer curve Dimmer speed mode: OFF Dimmer speed 1 (fastest) Dimmer speed 2 Dimmer speed 3 (slowest) Fan auto Fan on Fan off Fan silent X-Fade Speed: OFF X-Fade Speed: 1 (fastest) X-Fade Speed: 2 X-Fade Speed: 3 X-Fade Speed: 4 (slowest) Reserved for future use Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Ovation Rêve E-3 User Manual Rev. 4
Page 19 of 26
14Ch1
Channel
1 2 3 4 5 6
Function
Dimmer Red Green Blue Amber Mint
7
Strobe
8
Virtual color wheel
9
Color temperature
10
Hue
11
Auto programs
12
Auto speed
13
Control
(hold for 3 seconds)
14
Gobo rotator
OPERATION
Value
000 255 000 255 000 255 000 255 000 255 000 255 000 010 011 255 000 255 000 255 000 000 001 255 000 010 011 060 061 110 111 160 161 210 211 255 000 255 000 007 008 015 016 023 024 031 032 039 040 047 048 055 056 063 064 071 072 079 080 087 088 095 096 103 104 111 112 119 120 127 128 135 136 143 144 151 152 159 160 167 168 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% 0100% No function Strobe, slow to fast Refer to Virtual Color Wheel Chart Refer to Color Temperature DMX Chart 0 -2525 No function Auto program 1 Auto program 2 Auto program 3 Auto program 4 Auto program 5 Auto speed, slow to fast No function Dimmer reset Red shift on Red shift off S-curve dimmer Linear dimmer Square dimmer curve Inverse square dimmer curve Dimmer speed mode: OFF Dimmer speed 1 (fastest) Dimmer speed 2 Dimmer speed 3 (slowest) Fan auto Fan on Fan off Fan silent X-Fade Speed: OFF X-Fade Speed: 1 (fastest) X-Fade Speed: 2 X-Fade Speed: 3 X-Fade Speed: 4 (slowest) Reserved for future use Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Page 20 of 26
Ovation Rêve E-3 User Manual Rev. 4
OPERATION
14Ch2
Channel
1 2 3 4 5 6 7 8 9 10 11 12
13
Function
Dimmer Dimmer fine Red Red fine Green Green fine Blue Blue fine Amber Amber fine Mint Mint fine
Strobe
14
Gobo rotator
12Ch
Channel 1 2 3 4 5 6 7
8
9 10
11
Function Dimmer Dimmer fine Red Green Blue Amber Mint
Strobe
Virtual color wheel Color temperature
Hue
12
Gobo rotator
8Ch
Channel 1 2 3 4 5 6
7
Function Dimmer Red Green Blue Amber Mint
Strobe
8
Gobo rotator
Value
000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 010 011 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% 0100% No function Strobe, slow to fast Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Value
000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 010 011 255 000 255 000 255 000 000 001 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% 0100% 0100% No function Strobe, slow to fast Refer to Virtual Color Wheel Chart Refer to Color Temperature DMX Chart 0 -2525 Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Value
000 255 000 255 000 255 000 255 000 255 000 255 000 010 011 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% 0100% No function Strobe, slow to fast Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Ovation Rêve E-3 User Manual Rev. 4
Page 21 of 26
6Ch
Channel 1 2 3 4 5
Function
Red Green Blue Amber Mint
6
Gobo rotator
5Ch
Channel 1 2 3
4
Function Dimmer Virtual color wheel Color temperature
Hue
5
Gobo rotator
1Ch
Channel 1
HSV
Channel 1 2 3
Function Dimmer
Function Hue Saturation Value
4
Gobo rotator
OPERATION
Value
000 255 000 255 000 255 000 255 000 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% 0100% 0100% Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Value
000 255 000 255 000 255 000 000 001 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% Refer to Virtual Color Wheel Chart Refer to Color Temperature DMX Chart 0 -2525 Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Value Percent/Setting 000 255 0100%
Value
000 255 000 255 000 255 000 127 128 190 191 192 193 255
Percent/Setting
0100% 0100% 0100% Index Clockwise rotation, fast to slow Stop Counterclockwise rotation, slow to fast
Page 22 of 26
Ovation Rêve E-3 User Manual Rev. 4
TECHNICAL
5. Technical Information
Product Maintenance
To maintain optimum performance and minimize wear, clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. Clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear. To clean the product:
1. Unplug the product from power. 2. Wait until the product is at room temperature. 3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents. 4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol. 5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue. 6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Ovation Rêve E-3 User Manual Rev. 4
Page 23 of 26
TECHNICAL SPECIFICATIONS
6. Technical Specifications
Dimensions and Weight
Length
Fixture only
20.44 in (519 mm)
With lens extended 26.83 in (681 mm)
Width 13.07 in (332 mm) 13.07 in (332 mm)
Height 20.53 in (522 mm) 20.53 in (522 mm)
Weight 18.6 lb (8.4 kg)
Power
Power Supply Type Switching (internal)
Range 100 to 240 VAC, 50/60 Hz
Voltage Selection Auto-ranging
Parameter
Consumption
Operating Current
Power-linking current (products)
100 V, 60 Hz
371 W
3.68 A
13.6 A (3 products)
120 V, 60 Hz
367 W
3.04 A
13.6 A (4 products)
208 V, 60 Hz
356 W
1.76 A
13.6 A (7 products)
230 V, 50 Hz
353 W
1.59 A
13.6 A (8 products)
240 V, 50 Hz
356 W
1.52 A
13.6 A (8 products)
Power I/O Power input connector Power output connector
Power cord plug
U.S./Canada Seetronic Powerkon IP65 Seetronic Powerkon IP65
Edison (U.S.)
Worldwide Seetronic Powerkon IP65 Seetronic Powerkon IP65
Local plug
Light Source
Type
Color
Red
Green
LED
Blue Royal blue
Amber
Mint
Quantity
12 19 3 9 24 24
Power 3.510 W
Current
Lifespan Color Temperature
2.4 A 50,000 hours
5470 K
Photometrics
Parameter 5° 10° 14° 19° 26° 36° 50°
Beam angle 4.6° 10° 14.8° 18.5° 26° 33.3° 49.5°
Field angle 5.6° 11.1° 16° 21.6° 29.6° 37.1° 55.7°
Illuminance @ 5 m (lux)
31,856 18,924
9,284
5,635
3,378
2,085
870
Lumens 5,076 11,250 12,179 12,156 13,300 13,223 12,216
15°30° 13° 28.5° 15.4° 32.2°
9,292 2,671
12,057
25°50° 23.6° 40.5° 25.8° 44.1°
3,710 1,527
14,355
Thermal
Maximum External Temperature 113 °F (45 °C)
Cooling System Fan-assisted convection
DMX
I/O Connector 3- and 5-pin XLR
Channel Range 1, 5, 6, 8, 12, 14CH1, 14CH2, 18, or HSV
Ordering
Product Name
Ovation Rêve E-3
Item Name OVATIONREVEE3
Item Code 03121729
UPC Number 78146220778
UL 1573 R CSA C22.2 No. 166
E113093
Page 24 of 26
Ovation Rêve E-3 User Manual Rev. 4
Returns
Returns
Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. To submit a service request online, go to www.chauvetprofessional.com/service-request. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number.
! Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside the box:
· Your name · Your address · Your phone number · RMA number · A brief description of the problem Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended.
! Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Ovation Rêve E-3 User Manual Rev. 4
Page 25 of 26
CONTACT US
Contact Us
General Information
Chauvet World Headquarters Address: 5200 NW 108th Ave. Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll Free: (800) 762-1084
Chauvet Europe Ltd Address: Unit 1C
Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT
Voice: +44 (0) 1773 511115 Fax: +44 (0) 1773 511110
Chauvet Europe BVBA Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97
Chauvet France Address: 3, Rue Ampère 91380 Chilly-Mazarin France Voice: +33 1 78 85 33 59
Chauvet Germany Address: Bruno-Bürgel-Str. 11 28759 Bremen Germany Voice: +49 421 62 60 20
Chauvet Mexico Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2) Zona Industrial Lerma Lerma, Edo. de México, CP 52000 Voice: +52 (728) 690-2010
Technical Support Voice: (844) 393-7575 Fax: (954) 756-8015
Email: [email protected] Website: www.chauvetprofessional.com
Email: [email protected] Website: www.chauvetprofessional.eu
Email: [email protected] Website: www.chauvetprofessional.eu
Email: [email protected] Website: www.chauvetprofessional.eu
Email: [email protected] Website: www.chauvetprofessional.eu
Email: [email protected] Website: www.chauvetprofessional.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, France, Germany, Benelux, or Mexico, contact the dealer of record.
Page 26 of 26
Ovation Rêve E-3 User Manual Rev. 4
Products « TRUSST
CHAUVET Professional
CHAUVET Professional
CHAUVET Professional
