Firstech 2017 Hyundai Santa Fe Pts Automatic Installation Guide (+ PDF)

Contents hide

1 2017 Hyundai Santa FE PTS Automatic

2017 Hyundai Santa FE PTS Automatic

Product Information

The product being discussed in this user manual is the Compustar
Remote Start RSA-HK11A with hardware CM-DC3. This product is
designed for use in a 2017 Hyundai Santa Fe PTS Automatic. The
firmware version is RSA-HK11A and the document number is A520062.
The user manual also provides information on the module connectors,
technical notes, and T-harness/component locator.

Product Usage Instructions

The Compustar Remote Start RSA-HK11A is designed to be installed
in a 2017 Hyundai Santa Fe PTS Automatic. To complete the
installation process, some accessories may be required. It is
recommended to visit the manufacturer’s website to see all the
required accessories for your vehicle.

The product can be used for remote start and keyless entry. The
user manual provides information on the supported features,
including security system, comfort, and other functions that are
defined by firmware. The product also includes automatic
transmission, cut loop, battery – 2 pin white, drone – 4 pin gray,
RF port – 4 pin blue, RPS sensor – 4 pin white, sensor 2 – 4 pin
green, alarm LED – 2 pin white, temp sensor – 2 pin blue,
programming button LED 2 (RS), FT-DAS – 4 pin red, and BLE – 4 pin
yellow.

It is important to note that a security plate may need to be
removed to access smart key module connectors. A bolt extractor and
a ratchet can be used to remove the plate’s tamper-proof screws.
Included bolts can be used to reinstall the security plate if
necessary.

The T-harness/component locator provides information on how to
locate the different components and connectors for the installation
process.

View Fullscreen

INSTALL GUIDE
2017 HYUNDAI SANTA FE PTS AUTOMATIC
DOCUMENT NUMBER
A520062
REVISION DATE
20211218_204600
FIRMWARE
RSA-HK11A
HARDWARE
CM-DC3
ACCESSORIES
ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.
TERMS OF USE
Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, noncompliant Certified Technicians or end users.
compustar.idatalink.com

REMOTE START Data Immobilizer Bypass (no key required) Key Required for Immobilizer Bypass Takeover Available No Takeover Available (shutdown on unlock or door open) 3x Lock Start from OEM Remotes Data / MUX Parking Light Control – Constant Data / MUX / Hazard Parking Light Control – Flashing Tach Monitoring Hood Status Brake Status E-Brake Status Glow Plug Status RAP Shutdown
KEYLESS ENTRY OEM Remotes Functional during RS OEM RFID Entry Sensors Functional during RS Door Lock Door Unlock Driver Door Priority Unlock Trunk/Hatch Release Power Liftgate Power Sliding Door (L) Power Sliding Door (R)
U.S. Patent No. 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2021

FEATURE LIST – 1 OF 1

PAGE 2 OF 13
Doc No.: A520062 – 20211218_204600

Supported

SECURITY SYSTEM Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Control from OEM Remotes Aftermarket Alarm Control from OEM RFID Entry Sensors Door Status Trunk/Hatch Status
COMFORT Rear Defrost Activation Heated Mirror Activation Heated Seat Activation Cooled Seat Activation Heated Steering Wheel Activation

Supported

Supported
Supported

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

MODULE CONNECTORS
AUTOMATIC TRANSMISSION
CUT LOOP
BATTERY – 2 PIN WHITE DRONE – 4 PIN GRAY
RF PORT – 4 PIN BLUE RPS SENSOR – 4 PIN WHITE
SENSOR 2 – 4 PIN GREEN ALARM LED – 2 PIN WHITE TEMP SENSOR – 2 PIN BLUE
PROGRAMMING BUTTON LED 2 (RS)
FT-DAS – 4 PIN RED BLE – 4 PIN YELLOW

MODULE LAYOUT – 1 OF 1 CONNECTOR PINOUT

PAGE 3 OF 13
Doc No.: A520062 – 20211218_204600

CM-DC3 MODULE
M1 – 8 PIN BLACK
M5 – 6 PIN BLUE M4 – 20 PIN BLACK M6 – 6 PIN BLACK M2 – 12 PIN BLACK M3 – 10 PIN WHITE LED 1 (BYPASS) FT-DAS SENSITIVTY ADJUSTMENT DIAL WEBLINK PORT – 4 PIN BLACK

10 9

12 11

10 9

M1 01 ORANGE – ACCESSORY (+) 02 RED – POWER (30A) 03 PURPLE – STARTER (+) 04 PINK/WHITE – PROG. RELAY #4 – IGNITION 2 (+) (DEFAULT) 05 PINK – IGNITION (+) 06 WHITE – PROG. RELAY #5 (10A) – PARKING LIGHTS (+) (DEFAULT) 07 RED – POWER (30A) 08 BLACK – GROUND
M2 01 GREEN·BLACK DOT – LOCK (-) OUTPUT 02 BLUE·BLACK DOT – UNLOCK (-) OUTPUT 03 RED/WHITE·BLACK DOT – TRUNK RELEASE (-) OUTPUT 04 GREEN/WHITE·BLACK DOT – ARM (-) OUTPUT 05 GREEN/BLACK·BLACK DOT – DISARM (-) OUTPUT 06 BLUE/WHITE·BLACK DOT – GWR (-) OUTPUT 07 BROWN·BLACK DOT – SIREN (+) OUTPUT 08 WHITE/PURPLE·BLACK DOT – POC 1 – 2ND UNLOCK OTHER DOORS (-) OUTPUT 09 PURPLE/BLACK·BLACK DOT – POC 2 – RAP SHUTDOWN (-) OUTPUT 10 WHITE/BLACK·BLACK DOT – POC 3 – HORN (-) OUTPUT 11 BROWN/BLACK·BLACK DOT – POC 4 – STARTER KILL (-) OUTPUT 12 WHITE·BLACK DOT – PARKING LIGHTS (-) OUTPUT
M3 01 BROWN·SILVER DOT – BRAKE (+) INPUT 02 BLACK/WHITE·SILVER DOT – E-BRAKE (-) INPUT 03 PURPLE·SILVER DOT – DOOR (+) INPUT 04 GREEN·SILVER DOT – DOOR (-) INPUT 05 PURPLE/WHITE·SILVER DOT – TACH (-) INPUT 06 WHITE/BLUE·SILVER DOT – X-TRIGGER (-) INPUT 07 GRAY·SILVER DOT – HOOD (-) INPUT 08 BLUE·SILVER DOT – TRUNK (-) INPUT 09 GRAY/BLACK·SILVER DOT – GLOW PLUG (+) INPUT 10 TAN·SILVER DOT – EXT ALARM SENSOR (-) INPUT
M4

10 9

12 11

14 13

16 15

18 17

20 19

FUNCTIONS DEFINED BY FIRMWARE

M5 FUNCTIONS DEFINED BY FIRMWARE
M6 FUNCTIONS DEFINED BY FIRMWARE

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

TECHNICAL NOTE – 1 OF 1
IMPORTANT
A SECURITY PLATE MAY NEED TO BE REMOVED TO ACCESS SMART KEY MODULE CONNECTORS. USE A BOLT EXTRACTOR AND A RATCHET TO REMOVE THE PLATE’S TAMPER PROOF SCREWS. USE INCLUDED BOLTS TO REINSTALL SECURITY PLATE IF NECESSARY.

PAGE 4 OF 13
Doc No.: A520062 – 20211218_204600

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

T-HARNESS / COMPONENT LOCATOR – 1 OF 1

PAGE 5 OF 13
Doc No.: A520062 – 20211218_204600

B A

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

! CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

M5 M4 M6 M2 M3

M1 01 02

08 1

M2 01 02

MS3

4 12 INSERT WIRE – PARKING LIGHT (-) OUTPUT

M3 01 02 03 04 05 06 07 GRAY·SILVER DOT – HOOD (-) INPUT 08 09 10

M4 01

JS1

06 07

MS1

3 10

12 3 CONNECT MS1 CONNECTOR FIRST

AND DISCONNECT LAST.

M5 01

MS2

T-HARNESS / WIRING DIAGRAM – 1 OF 1 (ADS-THR-HK3)
A SECURITY PLATE MAY NEED TO BE REMOVED 1 TO ACCESS SMART KEY MODULE CONNECTORS.
REFER TO TECHNICAL NOTE.

PAGE 6 OF 13
Doc No.: A520062 – 20211218_204600
SMART KEY MODULE, ABOVE GAS PEDAL (A)

VS2

1: WHITE 26 PIN SMART KEY MODULE CONNECTOR

1 1: SMART KEY MODULE HARNESS
VS1 1

PARKING LIGHT (-) PINK – 15

1: WHITE
12345678 9 10 11 12 13 14 15 16

PARKING LIGHT SWITCH (B)

HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2
RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

HARDWIRE / COMPONENT LOCATOR – 1 OF 1
A C B

PAGE 7 OF 13
Doc No.: A520062 – 20211218_204600

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

! CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

M5 M4 M6 M2 M3

M1 01 ORANGE – ACCESSORY (+) 02 RED – 12 VOLT (+) 03 PURPLE – STARTER (+) 04 PINK/WHITE 05 PINK – IGNITION (+) 06 WHITE 07 RED – 12V (+) 08 BLACK – GROUND
M2 01 GREEN·BLACK DOT 02 BLUE·BLACK DOT 03 RED/WHITE·BLACK DOT 04 GREEN/WHITE·BLACK DOT – PTS (-) OUTPUT 05 GREEN/BLACK·BLACK DOT – PTS (-) OUTPUT 06 BLUE/WHITE·BLACK DOT 07 EMPTY 08 WHITE/PURPLE·BLACK DOT 09 PURPLE/BLACK·BLACK DOT 10 WHITE/BLACK·BLACK DOT – HORN (-) OUTPUT 11 BROWN/BLACK·BLACK DOT 12 WHITE·BLACK DOT – PARKING LIGHT (-) OUTPUT
M3 01 BROWN·SILVER DOT 02 BLACK/WHITE·SILVER DOT 03 PURPLE·SILVER DOT 04 GREEN·SILVER DOT 05 PURPLE/WHITE·SILVER DOT 06 WHITE/BLUE·SILVER DOT 07 GRAY·SILVER DOT – HOOD (-) INPUT 08 BLUE·SILVER DOT 09 GRAY/BLACK·SILVER DOT 10 EMPTY
M4 01 EMPTY 02 EMPTY 03 BROWN/RED – CANH 1 04 BROWN/YELLOW – CANL 1 05 BLUE/RED 06 BLUE/YELLOW 07 EMPTY 08 ORANGE 09 YELLOW 10 EMPTY 11 GRAY/RED – IMMOBILIZER (DATA) 12 GRAY/YELLOW 13 GREEN/RED 14 ORANGE/WHITE 15 BROWN 16 ORANGE/BLACK 17 PINK 18 PURPLE 19 RED 20 BLACK
M5 01 GRAY/BLACK·BLUE DOT 02 WHITE/BLACK·BLUE DOT 03 GRAY/RED·BLUE DOT 04 WHITE/RED·BLUE DOT 05 GRAY·BLUE DOT 06 WHITE·BLUE DOT

HARDWIRE / WIRING DIAGRAM – 1 OF 1
PTS 1 (-) YELLOW/ORANGE – 02 PTS 2 (-) ORANGE/BLACK – 03
12V (+) RED – 01
CANH (DATA) BLUE – 29 CANL (DATA) RED – 39

PAGE 8 OF 13
Doc No.: A520062 – 20211218_204600

1: BLACK 12345678 9 10 11 12 13 14 15 16

PTS SWITCH (A)

1: WHITE

DRIVER KICK PANEL (B)

1 2: WHITE

57 45 35 25 20 1

58 46 36 26 21 2

59 47 60 48 61 49 62 50 63 51 64 52 65 53

37 27 38 28 39 29 40 30 41 31 42 32 43 33

13 3 14 4 15 5 16 6 17 7 18 8 19 9

66 54 44 34 22 10

67 55

23 11

68 56

24 12

STARTER (+) PINK – 07 ACCESSORY (+) BLUE – 11 IGNITION (+) GREEN – 25 OR 58 IMMOBILIZER (DATA) WHITE/ORANGE – 36

3: WHITE

48 26

49 38 27 17 2 50 39 28 18 3

51 40 34 29 19 12 4

52 41 35 20 13 5

53 42

14 6

54 43 36 21 15 7

55 44 37 30 22 16 8

56 45 31 23 9 57 46 32 24 10

58 47 33 25 11

1: WHITE

PARKING LIGHT (-) PINK – 15
HORN (-) HOOD SWITCH 1

12345678 9 10 11 12 13 14 15 16

PARKING LIGHT SWITCH (C)

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 1 RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

MODULE PROGRAMMING PROCEDURE – 1 OF 1

WARNING: All vehicle doors must be closed

Press and release the module’s programming

and locked prior to remote start sequence.

button.

When programming, only one key fob will be

used. The other one must be located at least

10 feet away from the vehicle.

Set ignition to ON position.

STOP ACC ON START

ENGINE START STOP

Wait, LED 1 will turn solid GREEN for 2

seconds.

Release the brake pedal. Wait, LED 2 will flash GREEN.

Set ignition to OFF position.

STOP ACC ON START

ENGINE START STOP

START vehicle for 15 seconds.

STOP ACC ON START

ENGINE START STOP

Press and hold the brake pedal.

Module Programming Procedure completed.

RSA-HK11A-[CM-DC3]-EN

PAGE 9 OF 13
Doc No.: A520062 – 20211218_204600
2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

>> 01 02 03

All vehicle doors must be closed and locked

prior to remote start sequence.

TAKEOVER PROCEDURE – 1 OF 1 Take over procedure completed.

Time restriction. Complete steps 2 to 5 within 45 seconds.

Failure to follow procedure will result in vehicle engine shutdown.

Press unlock on OEM or aftermarket remote or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

RSA-HK11A-[CM-DC3]-EN

PAGE 10 OF 13
Doc No.: A520062 – 20211218_204600
2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

REMOTE STARTER ERROR CODES – 1 OF 1

PAGE 11 OF 13
Doc No.: A520062 – 20211218_204600

REMOTE STARTER ERROR CODES: NOTES
I WARNING: The following applies only when the parking lights are connected and supported by the system.
II After a remote starter failure, the parking lights will flash three [3x] times followed by the error code. See table.

PARKING LIGHT FLASHES DIAGNOSTIC

3 + 1 3 + 2 3 + 3 3 + 4 3 + 5 3 + 6 3 + 7 3 + 8 3 + 9 3 + 10 3 + 11 3 + 12 3 + 13 3 + 14 3 + 15

Tach is not programmed OR engine is already running. Key is in ignition ON position. Door is open. Trunk is open. Foot brake is ON. Hood is open. Loop is not cut. No tach detected. Vehicle movement detected (VSS). System is in Valet Mode. CAN communication failure RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. Bypass problem. Idle mode or takeover is not available on this vehicle. Overheat protection.

REMOTE STARTER SHUTDOWN ERROR CODES: NOTES
I WARNING: The following applies only when the parking lights are connected and supported by the system.
II If the engine shuts down after a remote starter sequence use the query command from a compatible aftermarket remote to display the shutdown error code. The parking lights will flash four [4x] times followed by the error code. See table.

PARKING LIGHT FLASHES DIAGNOSTIC

4 + 1 4 + 2 4 + 3 4 + 4 4 + 5 4 + 6 4 + 7 4 + 8 4 + 9 4 + 10 4 + 11 4 + 12 4 + 13 4 + 14 4 + 15

Engine tach signal was lost. Emergency brake signal was lost. Foot brake ON detected. Hood open detected. Tach over rev detected. Glow plug timeout error. Vehicle movement detected (VSS). Check engine light ON. Low fuel level. Open door detected. CAN communication failure during RS sequence. RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. Bypass problem. Idle mode or takeover is not available on this vehicle. Overheat protection.

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

MODULE DIAGNOSTICS – 1 OF 2

PAGE 12 OF 13
Doc No.: A520062 – 20211218_204600

MODULE STATUS DURING:

LED 2*

LED 1**

LED STATUS

Flashing RED

MODULE PROGRAMMING

Solid RED

Flashing GREEN

Solid GREEN then OFF

OFF

1 RED flash

2 ORANGE flashes

3 ORANGE flashes

4 ORANGE flashes

7 ORANGE flashes

8 ORANGE flashes

9 ORANGE flashes

10 ORANGE flashes

11 ORANGE flashes

Solid RED

1 GREEN flash

2 GREEN flashes

3 RED flashes

4 RED flashes

6 RED flashes

7 ORANGE flashes

TACH PROGRAMMING

* LED 2 (RS) displays generic diagnostic codes specific to the remote start module. Orange LED flashes may appear red. ** LED 1 (Bypass) displays diagnostic codes specific to the firmware loaded on the module. Visit the programming diagnostics page for more information.

DIAGNOSTIC
Missing/wrong information from firmware or vehicle. See firmware specific diagnostics, or contact technical support. Module waiting for more vehicle information. Programming incomplete. Additional steps required to complete programming. Refer to install guide. Module programming completed successfully. No activity or module already programmed. No firmware on module. Connect to Weblink and flash device. Contact technical support. Module programming not completed. Contact technical support. Contact technical support. Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn. Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn. Boot loader update failed. Contact technical support. T-harness detection does not match install type selection in Weblink. Tach learn in progress. Tach signal programmed in analog. Tach signal programmed in data. No tach signal detected System is in valet mode. Turn off valet mode to program tach. Engine sensing set for `assumed start’. No tach programming required. Engine sensing not configured properly. Contact technical support.

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com

MODULE DIAGNOSTICS – 2 OF 2

PAGE 13 OF 13
Doc No.: A520062 – 20211218_204600

TRANSMITTER PROGRAMMING REMOTE START SEQUENCE MODULE STATUS DURING:

LED 2*
· · · · · · ·
· · · · ·
·

LED 1**
· ·

LED STATUS Flashing rapid RED Flashing slow RED Solid RED Flashing rapid GREEN 1 GREEN flash 3 GREEN flashes 4 GREEN flashes Flashing GREEN Rapid GREEN flashing Solid RED 1 GREEN flash 4 RED flashes 5 RED flashes 6 RED flashes
7 RED flashes

DIAGNOSTIC Remote start shutdown sequence. Remote start shutdown error code. Contact technical support. Remote start crank delay. Remote start cycle in progress. Working correctly. Remote start initiated successfully. Idle mode cycle in progress. Turbo mode cycle in progress. Remote start cycle in progress. Displays vehicle platform during runtime. Secure takeover initiated. Waiting to complete takeover after brake press. Remote programming in progress, waiting for remote pairing. Remote programmed. Shutdown remote starter before attempting remote programming. Engine must be off before attempting remote programming. System must be unlocked/disarmed before attempting remote programming.
Module must be learned to the vehicle before attempting remote programming.

RSA-HK11A-[CM-DC3]-EN

2017 Hyundai Santa Fe PTS Automatic compustar.idatalink.com