TRIM-TEX ³/4 Inch Large Bullnose Archway Bead
Product Information:
The product is a drywall bead that is used to reinforce and protect the edges of drywall during installation. The bead has a large setback of 90 degrees and comes with technical specifications. The product needs to be installed with Trim-Tex 847 Spray Adhesive and finished with drywall compound.
With its soft, rounded profile, it’s no wonder that the ¾” Large Bullnose Archway Bead remains one of Trim-Tex’s most popular corner trim designs! Whether you’re looking to soften your corners for a safer recreational environment or add a traditional/southwestern look to your room, Trim-Tex oˆers the most complete line of ¾”-radius Bullnose products in the industry
Product Usage Instructions:
- Before installation, coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
- Press the bead in place, applying pressure to the mud legs.
- Finish with drywall compound.
Refer to the installation video provided below for further guidance.
Installation Guide
Before Installation:
Ensure setbacks are even with the corner edge. Measure, cut and dry fit the bead, leaving a ½” gap at the floor.
- Step 1:
Coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive. - Step 2:
Press the bead in place, applying pressure to the mud legs. - Step 3:
Staple every 6”-8” using ½” staples. - Step 4:
Finish with drywall compound.
Plastic & Vinyl Drywall Corner Beads & Finishing | Trim-Tex
