UGEARS Desert Buggy Updated Mini Buggy
Assembly instructions
Remove model parts from the hanger board as illustrated below. Be careful not to break parts. If a part does not remove easily, carefully cut it out with a knife. This model is intended for self-assembly without glue. If you have difficulty installing the axles, try waxing them with a regular candle. All moving parts can also be waxed during assembly to reduce friction when operating the model.
Do not use a lighted candle!
Do not use a lighted candle!Symbols
Pay attention. Check position of the part
Wax the part with a regular candle (rub with a candle).
Specified details come with spare duplicates.
Pay attention. Check position of the part
Wax the part with a regular candle (rub with a candle).
Specified details come with spare duplicates.UnBoxing
- This is not a structural component; it is a tool for measurement and assembly.
Warning
- It’s easier to pull out some parts with the «helper (H)»
Installation Instructions
Mechanical models
Customer support
Watch the VIDEO
Thanks for following along on this journey with us.
