ColorKey CKU-1070 Kraken FX
Please read these instructions carefully before use. Operating this fixture according to these instructions is important to avoid any possible damage or accidents caused by misuse.
Introduction
Package Contents
- Kraken FX
- IEC Power Cable
- User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
- This fixture is for indoor use only.
- This fixture must be installed a minimum distance of 5 meters (16’4”) away from any lighted objects.
- Do not install or operate this fixture near flammable materials.
- This device must be installed, operated, and maintained by a qualified professional.
- Please check if the voltage is in accordance with the rated power before installing.
- Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power cord of similar rating.
Service & Support
Your ColorKey product includes a 2-year warranty. For technical support or to register your product, please visit https://www.colorkeyled.com/support/
You can also reach us by phone Monday thru Friday, 8:30am – 5pm PST at (818) 578-4030.
Display Operation
MENU: Access the menu/Scroll through menu options
UP: Scroll through menu selection or increase parameter
DOWN: Scroll through menu selection or parameters decrease
ENTER: Open/Select the current menu option
| Menu Item | Values | Function |
| Addr | 1-512 | Set DMX Address (001 to 512) |
| ChNd | 6ch / 12ch | Select number of DMX Channels |
| SLNd | MAST, SL1, | Set for Master / Slave |
| Auto | SP(1-9) | Adjust Auto Effects speed |
| Soun | So(1-9) | Set Sound Sensitivity Adjustments in Auto Mode |
| SEnS | SE(99-0) | Sound – Controlled Mode |
| LEd | On , Off | Display on or off |
| DiSP | dSip | Display setting |
| uEr | v10 | Software Version |
| rSet | – | Reset |
DMX Values
6 channels mode
| Chanel | Function | Value |
| 1 | Dimmer | 000-255 |
| 2 | Strobe | 000-007 Open |
| 008-255 Strobescope (Speed 0-100%) | ||
|
3 |
Movement | 000-007 No Function |
| 008-022 Movement 01 | ||
| 023-037 Movement 02 | ||
| 038-052 Movement 03 | ||
| 053-067 Movement 04 | ||
| 068-082 Movement 05 | ||
| 083-097 Movement 06 | ||
| 098-112 Movement 07 | ||
| 113-127 Movement 08 | ||
| 128-142 Movement 09 | ||
| 143-157 Movement 10 | ||
| 158-172 Movement 11 | ||
| 173-187 Movement 12 | ||
| 188-202 Movement 13 | ||
| 203-217 Movement 14 | ||
| 218-232 Movement 15 | ||
| 233-247 Movement 16 | ||
| 248-255 Sound Active | ||
| 4 | Movement Speed | 000-255 Movement Speed (slow to fast) |
| 5 | Color Chase | 000-015 No Function |
| 016-255 (See color Chase-Table) | ||
| 6 | Chase Speed | 000-255 Chase Speed (slow to fast) |
10 channels mode
| Chanel | Function | Value |
| 1 | Dimmer | 000-255 |
| 2 | Strobe | 000-007 Open |
| 008-255 Strobe (Speed 0-100%) | ||
| 3 | Pan | 000-255 Pan (0-540) |
| 4 | Pan Speed | 000-255 Speed fast to slow |
| 5 | Tilt1 | 000-255 Tilt1 (0-360) |
|
6 |
Tilt1 Rotate | 000-005 Stop |
| 006-126 Movement forward fast to slow | ||
| 127-128 Stop | ||
| 129-249 Movement forward Slow to Fast | ||
| 250-255 Stop | ||
| 7 | Color Side 1 | 000-255 See color table |
| 8 | Color Side 2 | 000-255 See color table |
| 9 | Blinder | 000-255 |
| 10 | NA | 000-255 |
Color Table
|
Color | 000-007 Blackout |
| 008-024 Red | |
| 025-041 Green | |
| 042-057 Blue | |
| 058-074 White | |
| 075-090 R + G | |
| 091-107 R + B | |
| 108-123 R + W | |
| 124-140 G + B | |
| 141-156 G + W | |
| 157-173 B + W | |
| 174-189 R + G + B | |
| 190-206 R + G + W | |
| 207-222 R + B + W | |
| 223-239 G + B + W | |
| 240-255 R + G + B + W |
Chase Table
|
Color Chase | 000-0015 No Function |
| 016-035 Chase 1 | |
| 036-056 Chase 2 | |
| 057-076 Chase 3 | |
| 078-097 Chase 4 | |
| 098-117 Chase 5 | |
| 118-138 Chase 6 | |
| 139-159 Chase 7 | |
| 160-179 Chase 8 | |
| 180-200 Chase 9 | |
| 201-220 Chase 10 | |
| 221-241 Chase 11 | |
| 242-255 Chase 12 |
Setup & Connections
① Wired DMX Cable Connections
Use a DMX to cable to connect to the in/out sockets on the bottom of the light for use with a cabled connection with DMX 512 control.
Troubleshooting
| Problem | Solutions |
|
No DMX control | · Confirm cable is connected securely to both fixture and controller |
| Fixture does not respond to sound | · Make sure the fixture is in Sound Active mode. |
Technical Information
- 7x10W RGBW 4-in-1 CREE LEDs
- DMX Channel Modes: 6 / 10 channels
- Control modes: DMX 512, Master /Slave, Sound Active, Stand Alone
- 0-100% Dimmer
- Working temperature: up to 40˚C
- Power consumption: 80W
- Power supply: AC110-240V;50-60Hz
- Product size: 11.1 x 8.1 x 7.8 in
- Net Weight: 9.1lbs
Please note: As we continue to work towards improving our products and your experience as a user, we recommend that you check our website periodically for updates to user manuals and specifications at www.ColorKeyLED.com or you may contact us directly at [email protected]
Home - ColorKey
